XBee Embedded Wi-Fi Module XBee Embedded Wi-Fi transceiver modules are IEEE 802.11b/g/n compliant, providing wireless connectivity to an project via serial UART/SPI interfaces. Using SoftAP Provisioning mode, any Smartphone or Tablet with a web browser can connect to the XBee Wi-Fi and configure the module to connect to an existing Wi-Fi network. The XBee Wi-Fi module shares a common footprint with other XBee modules.This allows different XBee technologies to be drop-in replacements for each other; developers can switch from IEEE 802.11 standard to IEEE 802.15.4 for example. Carrier Frequency: 2.4GHz ISM Band with 13 channelsRF Output Power: up to +16dBm (+13dBm for Europe/Australia/Brazil)Receiver Sensitivity: -97 to -71dBm OTA Data Rates: 11Mbps (802.11b), 54Mbps (802.11g), 72Mbps (802.11n)Host communication: serial UART/SPISecurity: WEP, WPA-PSK and WPA2-PSK4 channel 12-bit ADC10 x GPIO pinsPower supply: +3.14V to +3.46VdcOperating temperature range: -30 to +85°CDimensions: 24.4 x 32.9 x 7mm (DIL), 22 x 34 x 3mm (SMT)Applications: Wireless sensor networks, communication for the Internet of Things (IoT)RS Product Codes818-7329 XB2B-WFPS-001 SMT, PCB Antenna818-7326 XB2B-WFUS-001 SMT, U.FL Antenna Connector818-7322 XB2B-WFPT-001 DIL, PCB Antenna818-7335 XB2B-WFUT-001 DIL, U.FL Antenna Connector818-7338 XB2B-WFWT-001 DIL, Whip Antenna818-7332 XB2B-WFST-001 DIL, RPSMA Antenna Connector

XBee ZigBee RF Modules, Digi International XBee ZigBee RF modules provide wireless connectivity, a simple way to integrate mesh technology into applications. The Serial Peripheral Interface (SPI) provides a high-speed interface and optimises integration with embedded microcontrollers. XBee RF modules require no configuration or additional development. Supports binding and multicasting, for easy integration into home automation applications15 Input/Output digital lines Receiver sensitivity of 110 dBSleep current of sub 1 μAUART, SPI or over the air firmware upgrades

XBee ZigBee RF Modules, Digi International XBee ZigBee RF modules provide wireless connectivity, a simple way to integrate mesh technology into applications. The Serial Peripheral Interface (SPI) provides a high-speed interface and optimises integration with embedded microcontrollers. XBee RF modules require no configuration or additional development. Supports binding and multicasting, for easy integration into home automation applications15 Input/Output digital lines Receiver sensitivity of 110 dBSleep current of sub 1 μAUART, SPI or over the air firmware upgrades

XBee Embedded Wi-Fi Module XBee Embedded Wi-Fi transceiver modules are IEEE 802.11b/g/n compliant, providing wireless connectivity to an project via serial UART/SPI interfaces. Using SoftAP Provisioning mode, any Smartphone or Tablet with a web browser can connect to the XBee Wi-Fi and configure the module to connect to an existing Wi-Fi network. The XBee Wi-Fi module shares a common footprint with other XBee modules.This allows different XBee technologies to be drop-in replacements for each other; developers can switch from IEEE 802.11 standard to IEEE 802.15.4 for example. Carrier Frequency: 2.4GHz ISM Band with 13 channelsRF Output Power: up to +16dBm (+13dBm for Europe/Australia/Brazil)Receiver Sensitivity: -97 to -71dBm OTA Data Rates: 11Mbps (802.11b), 54Mbps (802.11g), 72Mbps (802.11n)Host communication: serial UART/SPISecurity: WEP, WPA-PSK and WPA2-PSK4 channel 12-bit ADC10 x GPIO pinsPower supply: +3.14V to +3.46VdcOperating temperature range: -30 to +85°CDimensions: 24.4 x 32.9 x 7mm (DIL), 22 x 34 x 3mm (SMT)Applications: Wireless sensor networks, communication for the Internet of Things (IoT)RS Product Codes818-7329 XB2B-WFPS-001 SMT, PCB Antenna818-7326 XB2B-WFUS-001 SMT, U.FL Antenna Connector818-7322 XB2B-WFPT-001 DIL, PCB Antenna818-7335 XB2B-WFUT-001 DIL, U.FL Antenna Connector818-7338 XB2B-WFWT-001 DIL, Whip Antenna818-7332 XB2B-WFST-001 DIL, RPSMA Antenna Connector