The Laird connectivity is the Flexible PIFA antenna for Wi-Fi MIMO applications. The FlexPIFA MIMO is specifically designed for 802.11 a/b/g/n as well as 802.11ac Wi-Fi modules that use MIMO or Wi-Fi Diversity. The flexible PIFA design provides for consistent performance across a broad array of enclosures and enables adhering the antenna to flat and curved surfaces. The FlexPIFA MIMO drastically simplifies the size, cost, and technical requirements for implementing the two antennas required for 802.11 MIMO radio applications the proper orientation and spacing between the two integrated antenna elements is already optimized for MIMO radio performance, giving you the best possible range and throughput. Two Integrated 2.4/5 GHz dual band elements specifically designed for 802.11 MIMO applications <BR/>Laird Connectivity&#146;s patented flexible PIFA antenna structure allows for use on flat and curved surfaces <BR/>Compact design versus the complexity of two separate antennas.

The Laird connectivity Lyra series,Dev Kit - BT v5.3 SIP Module includes small form factor PCB modules, as well as ultra-compact SIP options, to suit any host board footprint. Together, Silicon Labs and Laird Connectivity, will drive down your total cost of ownership, design complexity and risk, whilst ensuring you the fastest time to market for your next Bluetooth LE-enabled IoT design. Based on the EFR32BG22 SoC, the Lyra S enables Bluetooth® Low Energy connectivity while delivering best-in-class RF range and performance, future-proof capability for feature and OTA firmware updates, enhanced security features, and low energy consumption. Bluetooth mesh Low Power Node<BR/>Built-in antenna<BR/>Up to 8 dBm TX power<BR/>-98.9 dBm BLE RX sensitivity at 1 Mbps<BR/>32-bit ARM Cortex-M33 core at up to 76.8 MHz<BR/>512/32 kB of Flash/RAM memory<BR/>Optimal selection of MCU peripherals<BR/>Up to 24 GPIO pins<BR/>12.9 mm x 15.0 m

The Laird connectivity Lyra series, BT v5.3 SIP Module The Lyra S is a module designed and built to meet the performance, security, and reliability requirements of battery powered IoT products running on Bluetooth networks. Based on the EFR32BG22 SoC, the Lyra S enables Bluetooth® Low Energy connectivity while delivering best-in-class RF range and performance, future-proof capability for feature and OTA firmware updates, enhanced security features, and low energy consumption. Bluetooth 5.3<BR/>Built-in antenna or RF pin<BR/>Up to 6 dBm TX power<BR/>-98.6 dBm BLE RX sensitivity at 1 Mbps<BR/>32-bit ARM Cortex-M33 core at up to 76.8 MHz<BR/>512/32 kB of Flash/RAM memory<BR/>Optimal selection of MCU peripherals<BR/>25 GPIO pins<BR/>6 mm x 6 mm x 1.1 m

The Laird Connectivity summit SOM 8M plus is powered by NXP&#146;s innovative i.MX 8M plus processor and 88W8997 wireless silicon coupled with onboard NXP PMICs (PCA9450CHN and PM823UK), performance LPDDR4 RAM, and eMMC 5.1 storage and combine this with long term support summit yocto linux, secure enclave, and summit linux FIPS core crypto to offer a comprehensive hardware and software solution throughout products. Summit SOM 8M Plus<BR/>Quad Core CPU<BR/>2GB LPDDR4<BR/>16GB Embebed Multimedia Card<BR/>Cut Tape

The Laird Connectivity summit SOM 8M plus is powered by NXP&#146;s innovative i.MX 8M plus processor and 88W8997 wireless silicon coupled with onboard NXP PMICs (PCA9450CHN and PM823UK), performance LPDDR4 RAM, and eMMC 5.1 storage and combine this with long term support summit yocto linux, secure enclave, and summit linux FIPS core crypto to offer a comprehensive hardware and software solution throughout product&#146;s lifecycle. Summit SOM 8M Plus<BR/>Quad Core CPU<BR/>1GB LPDDR4<BR/>8GB Embebed Multimedia Card<BR/>Cut Tape

The Laird Connectivity summit SOM 8M plus is powered by NXP&#146;s innovative i.MX 8M plus processor and 88W8997 wireless silicon coupled with onboard NXP PMICs (PCA9450CHN and PM823UK), performance LPDDR4 RAM, and eMMC 5.1 storage and combine this with long term support summit yocto linux, secure enclave, and summit linux FIPS core crypto to offer a comprehensive hardware and software solution throughout product&#146;s lifecycle. Summit SOM 8M Plus<BR/>Quad Core CPU<BR/>512MB LPDDR4<BR/>8GB Embebed Multimedia Card<BR/>Cut Tape

The Laird Connectivity summit SOM 8M plus is powered by NXP&#146;s innovative i.MX 8M plus processor and 88W8997 wireless silicon coupled with onboard NXP PMICs (PCA9450CHN and PM823UK), performance LPDDR4 RAM, and eMMC 5.1 storage and combine this with long term support summit yocto linux, secure enclave, and summit linux FIPS core crypto to offer a comprehensive hardware and software solution throughout product&#146;s lifecycle. Development Kit<BR/>Summit SOM 8M Plus<BR/>Quad Core CPU<BR/>2GB LPDDR4<BR/>16GB Embebed Multimedia Card

The Laird Connectivity, Development kit for BL5340 Multi-Core / Protocol - Bluetooth® + 802.15.4 + NFC Module (Nordic nRF5340) has Trace pin (Ext antenna) It has trace pin

The Laird Connectivity, Sentrius BT6xx Ultrasonic Sensor Assembly. The Ultrasonic sensor enables the BT610 to measure the distances between the sensor and objects such as tank level / bin level applications. A maximum of 1 individual ultrasonic sensor is supported per BT610. Maximum measurement distance is 10 m

The Laird Connectivity Wi-Fi 6E Mini Nano Blade Flex 6 GHz is a flexible PCB antenna that supports 3 bands of WLAN applications, including the 6 to 7.125 GHz band enabling Wi-Fi 6E. These small flexible printed circuit antennas can be embedded in space-sensitive applications. They offer excellent efficiency over all 3 Wi-Fi bands. The antennas are specifically designed to be embedded inside various IoT devices for aesthetically pleasing integration. Three-band frequency coverage<BR/>Support for Wi-Fi 6E<BR/>Excellent Omni gain patterns<BR/>High efficiency

The Laird Connectivity, Sentrius BT6xx 0-500 Arms AC Current Sensor Assembly. The AC current sensor probes enable the BT610 to measure the RMS current of AC systems. Up to 3 individual AC current sensors supported per BT610. Current measurement range is 0 to 500 Arms AC Current <BR/>Current sensor cable length 1 m

The Laird Connectivity ,Sentrius BT6xx Pressure Sensor Assembly. The pressure sensor enables the BT610 to measure the pressure in a gas, liquid, or vapour supply lines and wirelessly report the measurement. A maximum of up to 2 individual pressure sensors is supported per BT610 Response time is less than 4 ms