Keenserts Inserts The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place. Drilling and tapping can be done without any specialist equipment, just standard drills and taps. Manufactured from stainless steelSuitable for use in alloys, light materials, steel and cast iron to increase the strength of the thread in these materials In thread repair use, the defect thread can be replaced with the same nominal diameter Significantly increases load capability in weaker materialsSpecial keys lock the Keensert into place eliminating rotation Easy to install no special taps required and no tangs to remove High resistance to torque out and pull out Camloc Inserts & Tools available in lightweight & heavy duty versions KEENSERTS® stainless steel inserts and studs provide strong, permanent metal threads in a range of metals, including ferrous and non-ferrous. The range includes stock numbers 668-4667, 668-4676, 668-4663, 668-4708, 668-4679, 668-4705, 668-4702, 668-4673, 668-4711 The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place. Drilling and tapping can be done without any specialist equipment, just standard drills and taps. For a range of installation tools see stock numbers: 668-4685, 668-4724,668-4720, 668-4727, 668-4718, 668-4698, 668-4689, 668-4682, 668-4691

Keenserts Inserts The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place. Drilling and tapping can be done without any specialist equipment, just standard drills and taps. Manufactured from stainless steelSuitable for use in alloys, light materials, steel and cast iron to increase the strength of the thread in these materials In thread repair use, the defect thread can be replaced with the same nominal diameter Significantly increases load capability in weaker materialsSpecial keys lock the Keensert into place eliminating rotation Easy to install no special taps required and no tangs to remove High resistance to torque out and pull out Camloc Inserts & Tools available in lightweight & heavy duty versions KEENSERTS® stainless steel inserts and studs provide strong, permanent metal threads in a range of metals, including ferrous and non-ferrous. The range includes stock numbers 668-4667, 668-4676, 668-4663, 668-4708, 668-4679, 668-4705, 668-4702, 668-4673, 668-4711 The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place. Drilling and tapping can be done without any specialist equipment, just standard drills and taps. For a range of installation tools see stock numbers: 668-4685, 668-4724,668-4720, 668-4727, 668-4718, 668-4698, 668-4689, 668-4682, 668-4691

Keenserts Inserts The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place. Drilling and tapping can be done without any specialist equipment, just standard drills and taps. Manufactured from stainless steelSuitable for use in alloys, light materials, steel and cast iron to increase the strength of the thread in these materials In thread repair use, the defect thread can be replaced with the same nominal diameter Significantly increases load capability in weaker materialsSpecial keys lock the Keensert into place eliminating rotation Easy to install no special taps required and no tangs to remove High resistance to torque out and pull out Camloc Inserts & Tools available in lightweight & heavy duty versions KEENSERTS® stainless steel inserts and studs provide strong, permanent metal threads in a range of metals, including ferrous and non-ferrous. The range includes stock numbers 668-4667, 668-4676, 668-4663, 668-4708, 668-4679, 668-4705, 668-4702, 668-4673, 668-4711 The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place. Drilling and tapping can be done without any specialist equipment, just standard drills and taps. For a range of installation tools see stock numbers: 668-4685, 668-4724,668-4720, 668-4727, 668-4718, 668-4698, 668-4689, 668-4682, 668-4691

Keenserts Inserts The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place. Drilling and tapping can be done without any specialist equipment, just standard drills and taps. Manufactured from stainless steelSuitable for use in alloys, light materials, steel and cast iron to increase the strength of the thread in these materials In thread repair use, the defect thread can be replaced with the same nominal diameter Significantly increases load capability in weaker materialsSpecial keys lock the Keensert into place eliminating rotation Easy to install no special taps required and no tangs to remove High resistance to torque out and pull out Camloc Inserts & Tools available in lightweight & heavy duty versions KEENSERTS® stainless steel inserts and studs provide strong, permanent metal threads in a range of metals, including ferrous and non-ferrous. The range includes stock numbers 668-4667, 668-4676, 668-4663, 668-4708, 668-4679, 668-4705, 668-4702, 668-4673, 668-4711 The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place. Drilling and tapping can be done without any specialist equipment, just standard drills and taps. For a range of installation tools see stock numbers: 668-4685, 668-4724,668-4720, 668-4727, 668-4718, 668-4698, 668-4689, 668-4682, 668-4691

Keenserts Inserts The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place. Drilling and tapping can be done without any specialist equipment, just standard drills and taps. Manufactured from stainless steelSuitable for use in alloys, light materials, steel and cast iron to increase the strength of the thread in these materials In thread repair use, the defect thread can be replaced with the same nominal diameter Significantly increases load capability in weaker materialsSpecial keys lock the Keensert into place eliminating rotation Easy to install no special taps required and no tangs to remove High resistance to torque out and pull out Camloc Inserts & Tools available in lightweight & heavy duty versions KEENSERTS® stainless steel inserts and studs provide strong, permanent metal threads in a range of metals, including ferrous and non-ferrous. The range includes stock numbers 668-4667, 668-4676, 668-4663, 668-4708, 668-4679, 668-4705, 668-4702, 668-4673, 668-4711 The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place. Drilling and tapping can be done without any specialist equipment, just standard drills and taps. For a range of installation tools see stock numbers: 668-4685, 668-4724,668-4720, 668-4727, 668-4718, 668-4698, 668-4689, 668-4682, 668-4691

Keenserts Inserts The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place. Drilling and tapping can be done without any specialist equipment, just standard drills and taps. Manufactured from stainless steelSuitable for use in alloys, light materials, steel and cast iron to increase the strength of the thread in these materials In thread repair use, the defect thread can be replaced with the same nominal diameter Significantly increases load capability in weaker materialsSpecial keys lock the Keensert into place eliminating rotation Easy to install no special taps required and no tangs to remove High resistance to torque out and pull out Camloc Inserts & Tools available in lightweight & heavy duty versions KEENSERTS® stainless steel inserts and studs provide strong, permanent metal threads in a range of metals, including ferrous and non-ferrous. The range includes stock numbers 668-4667, 668-4676, 668-4663, 668-4708, 668-4679, 668-4705, 668-4702, 668-4673, 668-4711 The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place. Drilling and tapping can be done without any specialist equipment, just standard drills and taps. For a range of installation tools see stock numbers: 668-4685, 668-4724,668-4720, 668-4727, 668-4718, 668-4698, 668-4689, 668-4682, 668-4691

Keenserts Inserts The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place. Drilling and tapping can be done without any specialist equipment, just standard drills and taps. Manufactured from stainless steelSuitable for use in alloys, light materials, steel and cast iron to increase the strength of the thread in these materials In thread repair use, the defect thread can be replaced with the same nominal diameter Significantly increases load capability in weaker materialsSpecial keys lock the Keensert into place eliminating rotation Easy to install no special taps required and no tangs to remove High resistance to torque out and pull out Camloc Inserts & Tools available in lightweight & heavy duty versions KEENSERTS® stainless steel inserts and studs provide strong, permanent metal threads in a range of metals, including ferrous and non-ferrous. The range includes stock numbers 668-4667, 668-4676, 668-4663, 668-4708, 668-4679, 668-4705, 668-4702, 668-4673, 668-4711 The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place. Drilling and tapping can be done without any specialist equipment, just standard drills and taps. For a range of installation tools see stock numbers: 668-4685, 668-4724,668-4720, 668-4727, 668-4718, 668-4698, 668-4689, 668-4682, 668-4691

Keenserts Inserts The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place. Drilling and tapping can be done without any specialist equipment, just standard drills and taps. Manufactured from stainless steelSuitable for use in alloys, light materials, steel and cast iron to increase the strength of the thread in these materials In thread repair use, the defect thread can be replaced with the same nominal diameter Significantly increases load capability in weaker materialsSpecial keys lock the Keensert into place eliminating rotation Easy to install no special taps required and no tangs to remove High resistance to torque out and pull out Camloc Inserts & Tools available in lightweight & heavy duty versions KEENSERTS® stainless steel inserts and studs provide strong, permanent metal threads in a range of metals, including ferrous and non-ferrous. The range includes stock numbers 668-4667, 668-4676, 668-4663, 668-4708, 668-4679, 668-4705, 668-4702, 668-4673, 668-4711 The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place. Drilling and tapping can be done without any specialist equipment, just standard drills and taps. For a range of installation tools see stock numbers: 668-4685, 668-4724,668-4720, 668-4727, 668-4718, 668-4698, 668-4689, 668-4682, 668-4691

Keenserts Inserts The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place. Drilling and tapping can be done without any specialist equipment, just standard drills and taps. Manufactured from stainless steelSuitable for use in alloys, light materials, steel and cast iron to increase the strength of the thread in these materials In thread repair use, the defect thread can be replaced with the same nominal diameter Significantly increases load capability in weaker materialsSpecial keys lock the Keensert into place eliminating rotation Easy to install no special taps required and no tangs to remove High resistance to torque out and pull out Camloc Inserts & Tools available in lightweight & heavy duty versions KEENSERTS® stainless steel inserts and studs provide strong, permanent metal threads in a range of metals, including ferrous and non-ferrous. The range includes stock numbers 668-4667, 668-4676, 668-4663, 668-4708, 668-4679, 668-4705, 668-4702, 668-4673, 668-4711 The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place. Drilling and tapping can be done without any specialist equipment, just standard drills and taps. For a range of installation tools see stock numbers: 668-4685, 668-4724,668-4720, 668-4727, 668-4718, 668-4698, 668-4689, 668-4682, 668-4691

Keenserts Inserts The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place. Drilling and tapping can be done without any specialist equipment, just standard drills and taps. Manufactured from stainless steelSuitable for use in alloys, light materials, steel and cast iron to increase the strength of the thread in these materials In thread repair use, the defect thread can be replaced with the same nominal diameter Significantly increases load capability in weaker materialsSpecial keys lock the Keensert into place eliminating rotation Easy to install no special taps required and no tangs to remove High resistance to torque out and pull out Camloc Inserts & Tools available in lightweight & heavy duty versions KEENSERTS® stainless steel inserts and studs provide strong, permanent metal threads in a range of metals, including ferrous and non-ferrous. The range includes stock numbers 668-4667, 668-4676, 668-4663, 668-4708, 668-4679, 668-4705, 668-4702, 668-4673, 668-4711 The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place. Drilling and tapping can be done without any specialist equipment, just standard drills and taps. For a range of installation tools see stock numbers: 668-4685, 668-4724,668-4720, 668-4727, 668-4718, 668-4698, 668-4689, 668-4682, 668-4691

Keenserts Inserts The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place. Drilling and tapping can be done without any specialist equipment, just standard drills and taps. Manufactured from stainless steelSuitable for use in alloys, light materials, steel and cast iron to increase the strength of the thread in these materials In thread repair use, the defect thread can be replaced with the same nominal diameter Significantly increases load capability in weaker materialsSpecial keys lock the Keensert into place eliminating rotation Easy to install no special taps required and no tangs to remove High resistance to torque out and pull out Camloc Inserts & Tools available in lightweight & heavy duty versions KEENSERTS® stainless steel inserts and studs provide strong, permanent metal threads in a range of metals, including ferrous and non-ferrous. The range includes stock numbers 668-4667, 668-4676, 668-4663, 668-4708, 668-4679, 668-4705, 668-4702, 668-4673, 668-4711 The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place. Drilling and tapping can be done without any specialist equipment, just standard drills and taps. For a range of installation tools see stock numbers: 668-4685, 668-4724,668-4720, 668-4727, 668-4718, 668-4698, 668-4689, 668-4682, 668-4691

Keenserts Inserts The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place. Drilling and tapping can be done without any specialist equipment, just standard drills and taps. Manufactured from stainless steelSuitable for use in alloys, light materials, steel and cast iron to increase the strength of the thread in these materials In thread repair use, the defect thread can be replaced with the same nominal diameter Significantly increases load capability in weaker materialsSpecial keys lock the Keensert into place eliminating rotation Easy to install no special taps required and no tangs to remove High resistance to torque out and pull out Camloc Inserts & Tools available in lightweight & heavy duty versions KEENSERTS® stainless steel inserts and studs provide strong, permanent metal threads in a range of metals, including ferrous and non-ferrous. The range includes stock numbers 668-4667, 668-4676, 668-4663, 668-4708, 668-4679, 668-4705, 668-4702, 668-4673, 668-4711 The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place. Drilling and tapping can be done without any specialist equipment, just standard drills and taps. For a range of installation tools see stock numbers: 668-4685, 668-4724,668-4720, 668-4727, 668-4718, 668-4698, 668-4689, 668-4682, 668-4691