The Kübler Electronic multifunction device and is a voltage-powered multifunction counter with 4 functions in one device for Pulse, position, frequency and speed display, timer and short time meter. With 6-digit LED display for NPN, PNP input signals. IP65 rated

Codix 566 Process Controller The codix 566 process controller with totaliser function, displays measured values from all common strain-gauge inputs in high resolution. In addition, it can monitor and control 2 limit values.The controller is user-friendly and has a practical quick-start guide for setting the parameters and operating the device. 6-digit display, 14-segment LED, 14 mm highSimple programming via 4 keys on the frontOne front key as well as 2 additional inputs can be programmed for specific applicationsSampling rate of 10 readings per secondApplication-specific characteristics curves via 12 measurement pointsManual totaliser function- can be reset separately2 relay outputs (changeover contacts) for limit monitoring with hysteresisON/OFF delay function for current measured or totaliser valuesDigital filter (first-order) for smoothing display fluctuation with unstable input signalsWide range of supply voltage 10 → 30 Vdc/ 90 → 260 Vac

Non Reset Totalising Counters Magnifying lens increases readout to 4mmRetains count during power failureUnaffected by shock, vibration or magnetic fields

Codix 52P Position Display and Frequency Meter High count speed, numerous programming optionsSeparate inputs for position and frequency displayPosition display with various count modes, tachometer with time-base (gate time) or time-interval (process time) with an accuracy>0.1% (HRA time)Scaling factor 0.0001 to 99.9999Division factor 0.0001 to 99.9999Level of inputs: 0-2VdcData retention via internal Eeprom

The signal splitter SP 2D-2D is a universal encoder interface (without potential separation) with 2 incremental encoder inputs for level conversion, distribution as well as contactless and bounce-free switching of encoder signals to the HTL or RS422 format. The module can be easily and conveniently mounted in a cabinet on a standard DIN rail 2 pulse inputs in the format A, B, 0 [HTL] or A, /A, B, /B, 0, /0 [RS422].Input frequency up to 250 kHz for asymmetrical signals and up to 1 MHz for symmetrical signals.2 control inputs for HTL / PNP signals [10 ... 30 V DC].2 output channels in the format A, B, 0 [HTL] or A, /A, B, /B, 0, /0 [RS422], separately adjustable for every output.

Miniature Adding Counter - W15.51 Suitable for battery operation and electronic circuitsFlush mount with spring clip

Kubler Counter The Kubler CODIX 250 series digital counter is a 6-digit LED display designed for NPN/PNP input signal panel mount pulse counter. It has a supply voltage rating ranging between 10VDC and 30VDC. It has a multifunction reset key, lockable via a separate input. This counter has a maximum count frequency of 60KHz. Features and Benefits Decimal point selectableLarge keys, can also be operated when wearing glovesSimple totalising and quantity counterManual or electrical reset of the display Set up parameters programmable using two front keysFront dimensions is 48mm x 24mmPlug-in screw terminalsOperating temperature ranges between -20°C and 65°C Applications Industrial counting applicationsControl and monitoring systemsManufacturing assembly lines Certifications IP65 rated

Kubler Digital Hour Meter The Kubler CODIX 135 series hour meter is a 6-digit LED display, panel-mount counter with screw connection. This is a simple, externally powered, the programmable meter. The counter is operated at voltage rating ranges between 10VDC and 30VDC. The LED display shows the NPN, PNP input signals used for pulse width or time interval measurement. It has an individually adjustable start/ stop function. Features and Benefits Totalizer with digital inputs NPN/PNP up to 60kHzDecimal point selectableSet up parameters programmable using two front keysManual or electrical resetOptional output is 1Hz clock pulse in case of active time measurementPanel cut-out dimensions are 22.2mm x 45mmMeasurement range is between 0 and 99999.99Operation temperature ranges between -20°C and 55°C Applications Compressors, solariums, special lights, and lampsAccessories, OEM equipment or retrofitting to the production machineTime recording (stopwatch function) at sporting events Certifications IP65 rated

The Kübler Electromechanical Hour meters or timers. These panel or DIN rail mount counters have a reduced mounting depth. They can be used in many different fields of application. These non-resettable counters are extremely tamper-proof. High reliabilityData retention in case of power failure.Long service life

The Kübler inclinometer IS40 permits 2-dimensional inclinations to be measured. The compact robust construction makes this sensor the ideal device for measuring angles in harsh environments. Rugged constructionHigh resolution and accuracyCurrent or voltage interfaceHigh shock resistanceZero point adjustment

The Kübler Electromechanical Hour meters or timers. These panel or DIN rail mount counters have a reduced mounting depth. They can be used in many different fields of application. These non-resettable counters are extremely tamper-proof. High reliabilityData retention in case of power failure.Long service life

The signal splitter SP 1SC-2SC2D is used to distribute signals from SinCos encoders or measuring systems without loss and without problems to several terminal devices. It features 2 SinCos outputs and 2 incremental outputs (HTL or TTL / RS422). The connected terminal devices can optionally be controlled with SinCos signals or with incremental pulses. The module can be easily and conveniently mounted in a cabinet on a standard DIN rail. Encoder supply 5 V or 24 V (switchable).Encoder signal input in the 1 Vpp format:SIN+ / SIN- / COS+ / COS- / REF+ / REF-.Two SinCos outputs with the same format as the input.Two incremental outputs in the format A, /A, B, /B, 0, /0 individual. Adjustable for TTL/RS422 or HTL level (10 ... 30 V DC). Maximum SinCos input frequency 500 kHz.