The Molex Premise Networks optical fibre patch cords offer factory controlled performance in a variety of connector, ISO performance standards and lengths. This patch cord reduces toxic or corrosive gasses emitted during combustionIt available in simplex, duplex, single mode, multi mode and a variety of connector options

The Molex Premise Networks PowerCat 6A shielded patch cords LS0H 2m are key components of the PowerCat 6A shielded end-to-end solution. Designed to support high speed 10GBASE-T networks, they are also backward compatible with 10/100/1000BASE-T networks. The patch cable is made from high quality four pair 26 AWG stranded copper wire. The patch cords are pre-terminated with RJ45 plugs and feature anti-snag slim strain relief slip on boots. 4 pair 26 AWG shielded stranded copper cablePre-terminated with RJ45 plugsSlim clear anti-snag slip on bootsSuitable for ANSI/TIA-568B wiring

Fusion Splice Tray A 12 position splice tray which fits neatly into fibre patch panels for the management of incoming fibres. The tray has four cable grips, one in each corner, which will retain incoming cables. There are two 6-way snap-in sleeve holders, which hold fusion splice sleeves.,Fibres are held in loops within the tray providing protection and easy servicing. Assembly instructions included.

The Molex Premise Networks PowerCat 6A shielded patch cords LS0H 1m are key components of the PowerCat 6A shielded end-to-end solution. Designed to support high speed 10GBASE-T networks, they are also backward compatible with 10/100/1000BASE-T networks. The patch cable is made from high quality four pair 26 AWG stranded copper wire. The patch cords are pre-terminated with RJ45 plugs and feature anti-snag slim strain relief slip on boots. 4 pair 26 AWG shielded stranded copper cablePre-terminated with RJ45 plugsSlim clear anti-snag slip on bootsSuitable for ANSI/TIA-568B wiring

The Molex Premise Networks PowerCat 6 shielded data gate jack is a key component of the PowerCat 6 shielded channel compliant system. Designed to support a growing requirement for shielded cabling systems offering enhanced EMC protection and improved alien crosstalk performance. Dual color coding allows 568A/B wiringPatented IDC V-shaped contacts that flex not fatigue when terminatedPatented spring-loaded shutterAccepts color coded port identification labels

Higher Bandwidth Multimode fibre fully supports 850 nm (SX) serial 10 Gb/s applications over 300 m. An effective bandwidth of 2000 MHz/km at 850 nm under laser launch is ensured with conformance to the 850 nm Differential Mode Delay test method.,The assemblies are manufactured in accordance with the specifications defined within BS:7718. 0.35dB or less insertion lossEnhanced bandwidth capabilityLSZH sheath, complying with IEC332.1 and 332.3

Euromod™ Faceplates Faceplates which will accept Euromod™ socket modules for convenient wall, panel and trunk mounting. Single gang faceplates will take up two snap-in data sockets; double gang faceplates take up to four sockets. Faceplates are designed to mount on standard BS1363 pattresses. Fixing screws supplied with each plate.

The Molex Premise Networks PowerCat 6A shielded patch cords LS0H 5m are key components of the PowerCat 6A shielded end-to-end solution. Designed to support high speed 10GBASE-T networks, they are also backward compatible with 10/100/1000BASE-T networks. The patch cable is made from high quality four pair 26 AWG stranded copper wire. The patch cords are pre-terminated with RJ45 plugs and feature anti-snag slim strain relief slip on boots. 4 pair 26 AWG shielded stranded copper cablePre-terminated with RJ45 plugsSlim clear anti-snag slip on bootsSuitable for ANSI/TIA-568B wiring

PowerCat™ Cat6 Angled Euromod II RJ45 Module Wall Plate Kits PowerCat™ cat6 angled Euromod II RJ45 module wall plate kits for flexible data outlet installation and high-speed data transmission. The PowerCat™t Euromod II cat6a RJ45 module features a Datagate Plus cat6 RJ45 connector in a polycarbonate UL94V-0 housing. The Datagate Plus RJ45 connector has a spring loaded shutter which offers protection against contamination and also serves to eject improperly seated patch cords. The DataGate Plus RJ45 cat6 connector is dual colour coded for either 568A or 568B wiring schedules and is RJ11 compatible. This PowerCat 6 Euromod II RJ45 module has a 25 x 50mm angled fascia which reduces the bend radius of patch cords. Each of these kits contains a wall plate and the relevant number of PowerCat™ Euromod II RJ45 modules. The minimum back box depth requirement for this RJ45 module is 25mm.Stock number 768-5260 has a 1 port single gang fascia and 1 RJ45 moduleStock number 768-5263 has a 2 port single gang fascia and 2 x RJ45 modulesStock number 768-5267 has a 4 port double gang fascia and 4 x RJ45 modules

PowerCat Cat 5e Trunk Molex category 5E 4 Pair U/UTP cable, has been designed to support 100 MHz up to 1 Gb/s transmission systems over 100 m. This cable is part of the PowerCat System range of products, that have been designed based on the PowerSum principle of crosstalk measurement and testing. Features and Benefits Supplied in 305 m easy spool box Conductor Size: 24 AWG Soft Plain Copper

Molex Premise Networks RJ Connector Module, Cat6a LAN - 183010070 This RJ connector module is designed for high-speed data transmission solutions in structured cabling systems requiring Keystone size apertures for wall outlet installations. It offers excellent protection against electromagnetic interference due to its shielded construction. Features & Benefits • 360° shielding for EMI protection• Easy and fast termination process• Ability to attach the cable in either 568A or 568B wiring• Zinc alloy plated bright Ni/Cu jack connector housing for durability• Tin matte finish IDC contact plating for reliable connections Applications • Ideal for use in structured cabling systems• Suitable for wall outlet installations requiring Keystone size apertures Can this RJ connector module be used in both 568A and 568B wiring configurations? Yes, it offers the ability to attach the cable in either 568A or 568B wiring. Will this module provide EMI protection in a structured cabling system? Yes, it features 360° shielding for excellent electromagnetic interference protection. Is this RJ connector module compatible with Molex C6 DataGate jacks? Yes, it is designed to be compatible with Molex C6 DataGate jacks for a two-connector permanent link or channel configuration.

The Molex Premise Networks PowerCat 6A shielded patch cords LS0H 1.5m are key components of the PowerCat 6A shielded end-to-end solution. Designed to support high speed 10GBASE-T networks, they are also backward compatible with 10/100/1000BASE-T networks. The patch cable is made from high quality four pair 26 AWG stranded copper wire. The patch cords are pre-terminated with RJ45 plugs and feature anti-snag slim strain relief slip on boots. 4 pair 26 AWG shielded stranded copper cablePre-terminated with RJ45 plugsSlim clear anti-snag slip on bootsSuitable for ANSI/TIA-568B wiring