OSI Large Active Area InGaAs Photodiodes The FCI-InGaAs-xxx-x series, from OSI Optoelectronics, are large active area InGaAs photodiodes. They are a range of IR sensitive detectors which offer high responsivity (1100-1620nm). They come in TO-46 or TO-5 packages with a flat window. Suitable applications for this family of photodiodes includes; IR instrumentation, monitoring, optical instrumentation, power measurement, IR sensing and medical devices. Features:Large active area: 1mm, 1.5mm and 3mmHigh responsivityLow noiseSpectral range: 900nm - 1700nm

FCI-InGaAs-XXX series with active area sizes of 75 μm, 120 μm, 300 μm, 400 μm, and 500 μm, exhibit the characteristics and need for Datacom and Telecom applications. Low capacitance, low dark current and high responsivity from 1100 nm to 1620 nm make these devices ideal for high bit rate receivers used in LAN, MAN, WAN, and other high speed communication systems. The photodiodes are packaged in 3 lead isolated TO-46 cans or with AR coated flat windows or micro lenses to enhance coupling efficiency. FCI-InGaAs-XXX series is also offered with FC, SC, ST and SMA receptacles. High SpeedHigh ResponsivityLow NoiseSpectral Range900nm to 1700nmAPPLICATIONSHigh Speed Optical CommunicationsSingle/Multi-Mode Fiber Optic ReceiverGigabit Ethernet/Fibre ChannelSONET/SDH, ATMOptical Taps

The Photoconductive Detector Series are suitable for high speed and high sensitivity applications. The spectral range extends from 350 to 1100 nm, making these photodiodes ideal for visible and near IR applications, including such AC applications as detection of pulsed LASER sources, LEDs, or chopped light.To achieve high speeds, these detectors should be reverse biased. Typical response times from 10 ns to 250 ns can be achieved with a 10V reverse bias, for example. When a reverse bias is applied, capacitance decreases (as seen in the figure below) corresponding directly to an increase in speed. As indicated in the specification table, the reverse bias should not exceed 30 volts. Higher bias voltages will result in permanent damage to the detector.Since a reverse bias generates additional dark current, the noise in the device will also increase with applied bias. For lower noise detectors, the Photovoltaic Series should be considered. High Speed ResponseLow CapacitanceLow Dark CurrentWide Dynamic RangeHigh ResponsivityAPPLICATIONSPulse DetectorsOptical CommunicationsBar Code ReadersOptical Remote ControlMedical EquipmentHigh Speed Photometry

OSI Large Active Area InGaAs Photodiodes The FCI-InGaAs-xxx-x series, from OSI Optoelectronics, are large active area InGaAs photodiodes. They are a range of IR sensitive detectors which offer high responsivity (1100-1620nm). They come in TO-46 or TO-5 packages with a flat window. Suitable applications for this family of photodiodes includes; IR instrumentation, monitoring, optical instrumentation, power measurement, IR sensing and medical devices. Features:Large active area: 1mm, 1.5mm and 3mmHigh responsivityLow noiseSpectral range: 900nm - 1700nm

OSI Position Sensing Detectors (PSDs) This family of position sensing detectors (PSD), from OSI Optoelectronics, utilise duo-lateral technology. They provide a continuous analogue output which offer high position accuracy over the majority of the sensing area. One or two dimensional positions can be measured using this range of PSDs.Suitable applications for these position sensing detectors (PSDs) include; beam alignment, position sensing, angle measurement, height measurements and motion analysis. Features:Super linearHigh accuracyWide dynamic rangeHigh reliabilityDuo lateral structure

High Speed ResponseLow CapacitanceLow Dark CurrentWide Dynamic RangeHigh ResponsivityAPPLICATIONSPulse DetectorsOptical CommunicationsBar Code ReadersOptical Remote ControlMedical EquipmentHigh Speed Photometry

OSI High Speed InGaAs Photodiodes The FCI-InGaAs-xxx series, from OSI Optoelectronics, are high speed InGaAs photodiodes. They are ideal for Datacom and Telecom applications. These high speed photodiodes offer low capacitance, low dark current and high responsivity, making them suitable for high bit rate receivers used in LAN, MAN, WAN and other high speed communication systems. This family of photodiodes are in 3-pin isolated TO-46 packages or 1-pin pill packages. Suitable applications include; high speed optical communications, fibre optic receivers, Gigabit Ethernet and optical taps. Features:High speedHigh responsivityLow noiseSpectral range: 900nm to 1700nm

OSI Photoconductive Series Photodiodes The Photoconductive series, from OSI Optoelectronics, are planar diffused silicon photodiodes designed for high speed and high sensitivity applications.Their spectral range (350-1100nm) makes the Photoconductive series suitable for visible and near IR applications. These general purpose photodiodes are suitable for applications including; pulse detectors, bar code readers, optical remote control, optical communications, medical equipment and high speed photometry. Features of the Photoconductive series:High responsivityLow capacitanceLow dark currentWide dynamic range

OSI High Speed InGaAs Photodiodes The FCI-InGaAs-xxx series, from OSI Optoelectronics, are high speed InGaAs photodiodes. They are ideal for Datacom and Telecom applications. These high speed photodiodes offer low capacitance, low dark current and high responsivity, making them suitable for high bit rate receivers used in LAN, MAN, WAN and other high speed communication systems. This family of photodiodes are in 3-pin isolated TO-46 packages or 1-pin pill packages. Suitable applications include; high speed optical communications, fibre optic receivers, Gigabit Ethernet and optical taps. Features:High speedHigh responsivityLow noiseSpectral range: 900nm to 1700nm

The Photoconductive Detector Series are suitable for high speed and high sensitivity applications. The spectral range extends from 350 to 1100 nm, making these photodiodes ideal for visible and near IR applications, including such AC applications as detection of pulsed LASER sources, LEDs, or chopped light.To achieve high speeds, these detectors should be reverse biased. Typical response times from 10 ns to 250 ns can be achieved with a 10V reverse bias, for example. When a reverse bias is applied, capacitance decreases (as seen in the figure below) corresponding directly to an increase in speed. As indicated in the specification table, the reverse bias should not exceed 30 volts. Higher bias voltages will result in permanent damage to the detector.Since a reverse bias generates additional dark current, the noise in the device will also increase with applied bias. For lower noise detectors, the Photovoltaic Series should be considered. High Speed ResponseLow CapacitanceLow Dark CurrentWide Dynamic RangeHigh ResponsivityAPPLICATIONSPulse DetectorsOptical CommunicationsBar Code ReadersOptical Remote ControlMedical EquipmentHigh Speed Photometry

High Speed ResponseLow CapacitanceLow Dark CurrentWide Dynamic RangeHigh ResponsivityAPPLICATIONSPulse DetectorsOptical CommunicationsBar Code ReadersOptical Remote ControlMedical EquipmentHigh Speed Photometry

OSI Photoconductive Series Photodiodes The Photoconductive series, from OSI Optoelectronics, are planar diffused silicon photodiodes designed for high speed and high sensitivity applications.Their spectral range (350-1100nm) makes the Photoconductive series suitable for visible and near IR applications. These general purpose photodiodes are suitable for applications including; pulse detectors, bar code readers, optical remote control, optical communications, medical equipment and high speed photometry. Features of the Photoconductive series:High responsivityLow capacitanceLow dark currentWide dynamic range