PMA KS 40-1 Temperature Controller The universal temperature controller KS 40-1 is intended for universal, precise, and cost-effective control tasks in all branches of industry. For this, the unit provides simple 2-point (on/off) control, continuous PID control, or 3-point stepping control. The process value signal is connected via a universal input. A supplementary analog input can be used for heating current measurement or as an external setpoint input.The KS 40-1 has three process outputs that can be 3 relays or 2 relays plus a universal output. This universal output can be used for operating a solid-state relay, a continuous current/voltage output or to energize a two-wire transmitter.This controller is particularly well suited to the following industry applications: Furnaces and ovens, Burners and boilers, Plastics processing & Driers. • BluePort® Front interface and BlueControl Software• Maintenance manager and error list• Automatic/Manual key• Monitoring of heating current and input circuit• Timer and programmer• Extended limit signalling function with latch• Type tested to EN 14597 (replaces DIN 3440), cULus

PMA KS 90-1 Temperature Controller The KS 90-1 process controller is suitable for universal, precise, and cost-effective control. The instrument provides simple 2-point (on/off) control, continuous PID control, or 3-point stepping control.The process value signal is connected via a universal input. A supplementary analog input can be used for heating current measurement, as an external set-point inputter for position feedback measurement of motorised stepping controllers.The optional 3rd input is a universal input that can be used for several functions, e.g. temperature dependent setpoint correction or differential control. The standard KS 90-1 is suitable for oxygen control using heated and unheated O2 sensors.The KS 90-1 is particularly suited to the following applications: Furnaces and ovens, Burners and boilers, Plastics processing & Driers. • BluePort®• Front interface and BlueControl software• Maintenance manager and error list• Two universal inputs• Day & Night display shows plain text and bargraphs• Manual gain scheduling• Self-Tuning to the setpoint without oscillation• Valve controller with position feedback and DAC monitoring• 3-point controller for water, fan and oil cooling• Type tested to EN 14597 (replaces DIN 3440) and cULus• High-impedance mV input for O2 sensors

PMA KS 50-1 Temperature Controller The universal KS 50-1 temperature controller is intended for precise and cost-effective control tasks. The instrument provides simple 2-point (on/off) control, continuous PID control or 3-point stepping control. The process value signal is connected via a universal input. A supplementary analog input can be used for heating current measurement or as an external set-point input.The KS 50-1 has three process outputs that can be 3 relays or 2 relays plus a universal output. This universal output can be used for operating a solid-state relay, a continuous current/voltage output or to energize a two-wire transmitter. Optionally there are two additional optocoupler outputs that can be used freely.The controller is suitable for a number of industry applications including: Furnaces and ovens, Burners and boilers, Plastics processing, Hot runners, Driers, Climatic chambers & Heat treatment plants. • Universal continuous/switching version, i.e. reduced stocks• 100ms cycle time, i.e. also suitable for fast control loops• 20ms as shortest pulse for very fast / strong actuators • Freely configurable analog output, e.g. as process value output• Customer-specific linearisation for all sensors• Settings can be blocked via password and internal switch for high security• Extended temperature range up to 60 °C allows mounting close to the process• Easy 2-point or offset measurement correction• Emergency operation after sensor break by means of the "output hold" function• Logical combination of digital outputs, e.g. for general alarm• Programmer with 10 segments and "end" signal• RS 422/485 Modbus RTU interface• Built-in transmitter power supply• Splash-water proof front (IP65)

PMA D280-1 Temperature Controller The PMA Digital 280-1 indicator ensures a fast reaction time with a scan rate of 100ms cycle time. The instrument offers customer-specific linearization for all sensors (16 segments). The maximum and minimum values are always stored and may be displayed on the front for quick reference. In addition to an indicator the Digital 280-1 can also be used as a signaller, on/off controller, two-point controller or a continuous controller.The Digital 280-1 indicator is suitable for use in the following applications: Furnaces and ovens, Burners and boilers, Weighing and batching, Process control & Plastics processing. • Horizontal form factor. 48mm high x 96mm wide• BluePort® Front interface and BlueControl® Software• Maintenance manager and error list• 5-digit, 20mm big display• Limit signalling functions with hysteresis, discriminator time and rate of change monitor• ON/OFF-, 2-point- and continuous controller• Oxygen measurement with high-impedance input

PMA KS 41-1 Temperature Controller The universal temperature controller KS 41-1 is intended for universal, precise, and cost-effective control tasks in all branches of industry. For this, the unit provides simple 2-point (on/off) control, continuous PID control, or 3-point stepping control. The process value signal is connected via a universal input. A supplementary analog input can be used for heating current measurement or as an external setpoint input.The KS 41-1 has three process outputs that can be 3 relays or 2 relays plus a universal output. This universal output can be used for operating a solid-state relay, a continuous current/voltage output or to energize a two-wire transmitter.This controller is particularly well suited to the following industry applications: Furnaces and ovens, Burners and boilers, Plastics processing & Driers. • Horizontal form factor. 48mm high x 96mm wide• BluePort® Front interface and BlueControl Software• Maintenance manager and error list• Automatic/Manual key• Monitoring of heating current and input circuit• Timer and programmer• Extended limit signalling function with latch• Type tested to EN 14597 (replaces DIN 3440), cULus and GL

P.M.A PID Temperature Controller, 100ms Cycle Time, 2-Point Measurement Correction Type - KS40 Series - KS40-100-0000D-000 Looking for a way to control the temperature of your industrial process? Choose this PID temperature controller from P.M.A. Taking data from sensing devices, it monitors the heat readings in your system and makes changes to ensure that the level stays as close as possible to your chosen setpoint. You can adjust the setpoint between -100°C and +1760°C when using it with thermocouples and -200°C to +850°C with resistance transducers, so it's a versatile choice. As it's a plug-in module, this DIN-rail-mounted controller is easy to install without the need for specialist tools. Features & Benefits • Compact dimensions of 48 (W) x 96 (H) x 118mm (D) take up minimal space• IP65-rated front panel for resistance to dust and low-pressure water jets• Supply voltage rating of 90 to 260V AC, so it's safe to use in powerful electrical applications• LED system to allow for convenient monitoring of output states• Wide operating temperature range between -20°C and +65°C for use in demanding environments Applications • Industrial furnaces• Chemical engineering• Pharmaceutical development Can I control voltage signals with this unit? Yes. In addition to temperature, you can use it to control current and voltage signals in a selectable range between -1999 and 9999.

PMA SG 45 Fast Signal Load Cell Transmitter The UNIFLEX SG 45 is a transmitter for processing and monitoring input signals form strain gauges, load cells, melt pressure sensors, and resistance bridges. It can be used in practically all industrial applications involving the precise measurement, indication, and processing of force, weight, or melt pressure. Moreover, it permits operation and parameter adjustment via keys in the front panel.Alternatively, the UNIFLEX SG 45 can be operated, parameterized, and calibrated by means of a PC and a connection adapter. This also permits the adjusted parameters and configuration to be documented during operation. The simple zero setting function ensures high operating convenience.The SG 45 is suitable for use in applications involving measurement, scaling, and isolation of electrical signals and is commonly used by the following industries: chemical industry, foodstuffs & beverage industries, concrete, asphalt, building industry and lime and clay. • Compact design, only 22.5 mm (0.87”) wide• Clips onto top-hat DIN rail• Plug-in screw terminals or spring-clamp connectors - simple connection• Dual-line LC display with additional display elements• process values always in view• Convenient 3-key operation• Direct communication between mounted controllers, fieldbus connections via bus coupler• Measurement input with high signal resolution (23 bits)• Universal high-resolution output (14 Bit) as combined voltage/current output• Two relay outputs• Quick response; only 50 ms cycle time, i.e. also suitable for fast signals• Customer-specific linearization• Dead load compensation and tare adjustment• Min/max indicator (’slave pointer’)• Pre-set for output value• Zero setting with adjustable limit value

PMA TB 45 Temperature Limiter The TB 45 temperature limiter is intended for precise, cost-effective signal monitoring & limiting tasks.The TB 45 can be used for heating and refrigeration processes. It is suitable for all thermocouple types and resistance type sensors. It is particularly designed for use in: all applications where an over or under temperature fault condition could present fire hazard or other hazard, heating system in buildings to DIN EN 12828, large hot-water boilers to DIN EN 12953-6, thermal transfer plants with organic heat transfer media to DIN 4754, oil-fired installations to DIN 4755 and limit signalling function for any type of input signal. • Compact solution for distributed automation• Display and operating functions• 2 universal inputs for TC, RTD, R, U, I, O2• Universal output, relays / optocoupler outputs• Front interface and BlueControl®-software• RS 485 interface• Compact design, only 22.5 mm (0.87”) wide - saves space in the control cabinet• Clips onto top-hat DIN rail• Plug-in screw terminals or spring-clamp connectors - simple connection• Dual-line LC display with additional display elements - process values always in view• Convenient 3-key operation• Direct communication between mounted controllers, fieldbus connections via bus coupler - simple integration into PLC/PC• Universal input- also reduces stock keeping• Second analogue input as universal input (optional)• Universal high-resolution output as combined voltage/current output• Two output relays or optocoupler outputs• Fast 100 ms response - also suitable for fast signals

PMA TB 40-1 Limit Controller The TB 40-1 limit controller has been type tested to DIN standards. The TB40-1 can be used for heating and refrigeration processes. It is suitable for all thermocouple types and resistance type sensors. It is particularly designed for use in all applications where an over or under temperature fault condition could present fire hazard or other hazard, heating system in buildings to DIN EN 12828, large hot-water boilers to DIN EN 12953-6, thermal transfer plants with organic heat transfer media to DIN 4754 and oil-fired installations to DIN 4755. • Applicable for heating and cooling applications• For all types of thermocouples and resistance transducers• BluePort Front interface and BlueControl Software• Maintenance manager and error list• Alarm reset via RESET-key• Alarm reset via digital• Type tested to EN 14597 and cULus

PMA KS 42-1 Temperature Controller The universal temperature controller KS 42-1 is intended for universal, precise, and cost-effective control tasks in all branches of industry. For this, the unit provides simple 2-point (on/off) control, continuous PID control, or 3-point stepping control. The process value signal is connected via a universal input. A supplementary analog input can be used for heating current measurement or as an external setpoint input.The KS 42-1 has three process outputs that can be 3 relays or 2 relays plus a universal output. This universal output can be used for operating a solid-state relay, a continuous current/voltage output or to energize a two-wire transmitter.This controller is particularly well suited to the following industry applications: Furnaces and ovens, Burners and boilers, Plastics processing & Driers. • BluePort® Front interface and BlueControl Software• Maintenance manager and error list• Automatic/Manual key• Monitoring of heating current and input circuit• Timer and programmer• Extended limit signalling function with latch• Type tested to EN 14597 (replaces DIN 3440), cULus and GL

PMA UNIFLEX CI 45 Temperature Transmitter UNIFLEX CI 45 transmitters are designed to give precise and cost-effective signal detection and processing. Every CI 45 has at least one universal input, one universal output and a relay.Optionally, the transmitter can be fitted with an additional relay, with a second universal input and counter or frequency input. Optionally, the voltage output can also be used as frequency output. Galvanic isolation is provided between inputs and outputs as well as from the supply voltage and the communication interfaces. • Compact design• Display & operating functions• Communication features• High resolution• Fast cycle times• Two universal inputs & universal output• Two relay outputs• Counter/ frequency input, frequency output• Customer-specific linearization• Measurement value correction• Min/max indicator (’slave pointer’)

PMA TB 45 Temperature Limiter The TB 45 temperature limiter is intended for precise, cost-effective signal monitoring & limiting tasks.The TB 45 can be used for heating and refrigeration processes. It is suitable for all thermocouple types and resistance type sensors. It is particularly designed for use in: all applications where an over or under temperature fault condition could present fire hazard or other hazard, heating system in buildings to DIN EN 12828, large hot-water boilers to DIN EN 12953-6, thermal transfer plants with organic heat transfer media to DIN 4754, oil-fired installations to DIN 4755 and limit signalling function for any type of input signal. • Compact solution for distributed automation• Display and operating functions• 2 universal inputs for TC, RTD, R, U, I, O2• Universal output, relays / optocoupler outputs• Front interface and BlueControl®-software• RS 485 interface• Compact design, only 22.5 mm (0.87”) wide - saves space in the control cabinet• Clips onto top-hat DIN rail• Plug-in screw terminals or spring-clamp connectors - simple connection• Dual-line LC display with additional display elements - process values always in view• Convenient 3-key operation• Direct communication between mounted controllers, fieldbus connections via bus coupler - simple integration into PLC/PC• Universal input- also reduces stock keeping• Second analogue input as universal input (optional)• Universal high-resolution output as combined voltage/current output• Two output relays or optocoupler outputs• Fast 100 ms response - also suitable for fast signals