Housed temperature sensors Surface-mount probes for temperature control.Available in two versions:  standard housing and sealed housing, IP55 plexo

Pt100 temperature probes Pt 100 temperature probes for the food processing industry.Mounted via sliding connector or using a thermowell.Class A as per NFC 42330.

STATOP On/Off Controllers Professional range of On/Off Temperature Controllers to suit a variety of applications. This range of Temperature Controllers support Fuzzy Logic, which offers automatic process recovery. STATOP Controllers offer a highly efficient solution with which offer a comprehensive system through a user-friendly control interface Analogue regulators with On-Off (O/O) or Proportional (P) action.Blind version or with measurement display.Regulation algorithm: On-Off or P.Temperature input: J, K thermocouple or Pt 100 Ώ resistor.Regulation direction: direct (cold) or inverse (hot).Regulation output: inverter relay.Operating temperature: -10 ￫ +50 °C.

Pyro Controle STATOP Series Professional range of PID Temperature Controllers to suit a variety of applications. This range of Temperature Controllers support Fuzzy Logic, which offers automatic process recovery. STATOP Controllers offer a highly efficient solution with which offer a comprehensive system through a user-friendly control interface Digital regulators fitted with automatic action adjustment system: self-adjusting PID regulation modeRegulators fitted with 2 displays: red for measurement and green for setpointCommunication by RS 485 connection (depending on model)Regulation algorithm: PID + fuzzy logicProgrammable temperature input: thermocouple and Pt 100 Ώ resistanceDisplay: 2 x 10,000 pointsTemperature ramp: 0 ￫ 480 °C/minTimer: 0 ￫ 9999 minRegulation output: 2 A inverter relay, analogue 4 ￫ 20 mA - 0 ￫ 10 V or logic 0 ￫ 5 VProportional band: 0 ￫ 20 °CAdjustable hysteresis from 0 → 11 sSupply voltage: 90 ￫ 260 VacOperating temperature: -10 ￫ +50 °C

Pyro Controle STATOP Series Professional range of PID Temperature Controllers to suit a variety of applications. This range of Temperature Controllers support Fuzzy Logic, which offers automatic process recovery. STATOP Controllers offer a highly efficient solution with which offer a comprehensive system through a user-friendly control interface Digital regulators fitted with automatic action adjustment system: self-adjusting PID regulation modeRegulators fitted with 2 displays: red for measurement and green for setpointCommunication by RS 485 connection (depending on model)Regulation algorithm: PID + fuzzy logicProgrammable temperature input: thermocouple and Pt 100 Ώ resistanceDisplay: 2 x 10,000 pointsTemperature ramp: 0 ￫ 480 °C/minTimer: 0 ￫ 9999 minRegulation output: 2 A inverter relay, analogue 4 ￫ 20 mA - 0 ￫ 10 V or logic 0 ￫ 5 VProportional band: 0 ￫ 20 °CAdjustable hysteresis from 0 → 11 sSupply voltage: 90 ￫ 260 VacOperating temperature: -10 ￫ +50 °C

Pyro Controle Temperature Controller The Pyro Controle STATOP 30 series temperature controller has a supply voltage rating ranging from 90VAC to 260VAC. This controller has a width of 48mm and a height of 48mm (1/16 DIN)device. It has a single relay output. This device equipped with an automatic action adjustment system with a self-adjusting PID regulation mode. It also includes fuzzy logic that carries out automatic process recovery. The controller is a combination of technical sophistication and user-friendliness and can be used by people with no specific control skills. Features and Benefits Adjustable hysteresis from 0 second to11 seconds Communication by RS 485 connection (depending on model)Digital regulators fitted with automatic action adjustment system is self-adjusting PID regulation modeDisplay has 2 x 10,000 pointsOperating temperature ranging between -10°C and 50°CProgrammable temperature input is thermocouple and Pt 100ohm resistanceProportional band is 0°C to 20°CRegulation algorithm is PID and fuzzy logicRegulation output is 2A inverter relay and analogue 4mA to 20 mA and 0V to 10V or logic 0V to 5VRegulators fitted with 2 displays are red for measurement and green for setpointTemperature ramp is 0°C/minute to 480°C/minuteTimer is 0 minutes to 9999 minutes Certifications IP50 rated

Pyro Controle Temperature Controller The Pyro Controle STATOP 30 series temperature controller has a supply voltage rating ranging from 90VAC to 260VAC. This controller has a width of 48mm and a height of 48mm (1/16 DIN)device. This device equipped with an automatic action adjustment system with a self-adjusting PID regulation mode. It has dual relay output. It also includes fuzzy logic that carries out automatic process recovery. The controller is a combination of technical sophistication and user-friendliness and can be used by people with no specific control skills. Features and Benefits Adjustable hysteresis from 0 second to11 seconds Communication by RS 485 connection (depending on model)Digital regulators fitted with automatic action adjustment system is self-adjusting PID regulation modeDisplay has 2 x 10,000 pointsOperating temperature ranging between -10°C and 50°CProgrammable temperature input is thermocouple and Pt 100ohm resistanceProportional band is 0°C to 20°CRegulation algorithm is PID and fuzzy logicRegulation output is 2A inverter relay and analogue 4mA to 20 mA and 0V to 10V or logic 0V to 5VRegulators fitted with 2 displays are red for measurement and green for setpointTemperature ramp is 0°C/minute to 480°C/minuteTimer is 0 minutes to 9999 minutes Certifications IP50 rated

Pyro Controle STATOP Series Professional range of PID Temperature Controllers to suit a variety of applications. This range of Temperature Controllers support Fuzzy Logic, which offers automatic process recovery. STATOP Controllers offer a highly efficient solution with which offer a comprehensive system through a user-friendly control interface Digital regulators fitted with automatic action adjustment system: self-adjusting PID regulation modeRegulators fitted with 2 displays: red for measurement and green for setpointCommunication by RS 485 connection (depending on model)Regulation algorithm: PID + fuzzy logicProgrammable temperature input: thermocouple and Pt 100 Ώ resistanceDisplay: 2 x 10,000 pointsTemperature ramp: 0 ￫ 480 °C/minTimer: 0 ￫ 9999 minRegulation output: 2 A inverter relay, analogue 4 ￫ 20 mA - 0 ￫ 10 V or logic 0 ￫ 5 VProportional band: 0 ￫ 20 °CAdjustable hysteresis from 0 → 11 sSupply voltage: 90 ￫ 260 VacOperating temperature: -10 ￫ +50 °C

Pyro Controle STATOP Series Professional range of PID Temperature Controllers to suit a variety of applications. This range of Temperature Controllers support Fuzzy Logic, which offers automatic process recovery. STATOP Controllers offer a highly efficient solution with which offer a comprehensive system through a user-friendly control interface Digital regulators fitted with automatic action adjustment system: self-adjusting PID regulation modeRegulators fitted with 2 displays: red for measurement and green for setpointCommunication by RS 485 connection (depending on model)Regulation algorithm: PID + fuzzy logicProgrammable temperature input: thermocouple and Pt 100 Ώ resistanceDisplay: 2 x 10,000 pointsTemperature ramp: 0 ￫ 480 °C/minTimer: 0 ￫ 9999 minRegulation output: 2 A inverter relay, analogue 4 ￫ 20 mA - 0 ￫ 10 V or logic 0 ￫ 5 VProportional band: 0 ￫ 20 °CAdjustable hysteresis from 0 → 11 sSupply voltage: 90 ￫ 260 VacOperating temperature: -10 ￫ +50 °C

Pyro Controle STATOP Series Professional range of PID Temperature Controllers to suit a variety of applications. This range of Temperature Controllers support Fuzzy Logic, which offers automatic process recovery. STATOP Controllers offer a highly efficient solution with which offer a comprehensive system through a user-friendly control interface Digital regulators fitted with automatic action adjustment system: self-adjusting PID regulation modeRegulators fitted with 2 displays: red for measurement and green for setpointCommunication by RS 485 connection (depending on model)Regulation algorithm: PID + fuzzy logicProgrammable temperature input: thermocouple and Pt 100 Ώ resistanceDisplay: 2 x 10,000 pointsTemperature ramp: 0 ￫ 480 °C/minTimer: 0 ￫ 9999 minRegulation output: 2 A inverter relay, analogue 4 ￫ 20 mA - 0 ￫ 10 V or logic 0 ￫ 5 VProportional band: 0 ￫ 20 °CAdjustable hysteresis from 0 → 11 sSupply voltage: 90 ￫ 260 VacOperating temperature: -10 ￫ +50 °C

Pt100 temperature probes Pt 100 temperature probes for the food processing industry.Mounted via sliding connector or using a thermowell.Class A as per NFC 42330.

Pt100 temperature probes Pt 100 temperature probes for the food processing industry.Mounted via sliding connector or using a thermowell.Class A as per NFC 42330.