EMI / RFI braided screen Double-thick metal mesh screens, suited for electromagnetic shielding and weight continuity of assemblies or electric cable harnesses.<BR/>For effective shielding, both ends must be earthed.

EMI / RFI braided screen Double-thick metal mesh screens, suited for electromagnetic shielding and weight continuity of assemblies or electric cable harnesses.<BR/>For effective shielding, both ends must be earthed.

Gull wing clips These gull wing clips offer easy mounting for one or two transistors.<BR/>They offer a high mounting pressure to the centre of the transistor housing, to provide maximum heat transfer.<BR/>The screws are not supplied.

Gull wing clips These gull wing clips offer easy mounting for one or two transistors.<BR/>They offer a high mounting pressure to the centre of the transistor housing, to provide maximum heat transfer.<BR/>The screws are not supplied.

UVOX Electromagnetic Knitted Wire Mesh Tape The UVOX electromagnetic knitted wire mesh tape has a sleeve diameter of 25mm and the length of 10m. It is suitable for electromagnetic shielding and grounding of electrical as well as electronic cable assemblies and harnesses. It also provides mechanical protection and resistance to oil and fire. The sleeve is suitable for both indoor and outdoor applications. Features and Benefits A 50% overlap is recommended, providing a good 4-layer shield<BR/>Electric field shielding effectiveness is 71dB at 1MHz, 53dB at 10MHz, 32dB at 100MHz<BR/>Manufactured from 0.11mm diameter monel (nickel-copper alloy) wire Certifications ANSI/ESD S20.20:2014<BR/>BS EN 61340-5-1:2007

UVOX Electromagnetic Knitted Wire Mesh Tape The UVOX electromagnetic knitted wire mesh tape has a sleeve diameter of 50mm and the length of 10m. It is suitable for electromagnetic shielding and grounding of electrical as well as electronic cable assemblies and harnesses. It also provides mechanical protection and resistance to oil and fire. The sleeve is suitable for both indoor and outdoor applications. Features and Benefits A 50% overlap is recommended, providing a good 4-layer shield<BR/>Electric field shielding effectiveness is 71dB at 1MHz, 53dB at 10MHz, 32dB at 100MHz<BR/>Manufactured from 0.11mm diameter monel (nickel-copper alloy) wire Certifications ANSI/ESD S20.20:2014<BR/>BS EN 61340-5-1:2007

Wires Embedded in Silicone A flat gasket material manufactured from Monel wires chemically bonded in a silicone elastomer perpendicular to its surface at a density of 140 point contacts per cm2.<BR/>This combination provides excellent electromagnetic attenuation through the low resistance, point to point wire contacts<BR/>Custom gaskets can easily be made by cutting with a blade<BR/>Environmental sealing up to IP65<BR/>Service temperature range -65°C to +200°C

Copper Beryllium Finger Strips Copper beryllium finger strips provide a spring wiping action coupled with low electrical resistance<BR/>Ideal as an EMC gasket or earthing contact - optimum performance is achieved at 25% compression<BR/>Suitable for most enclosure door, cabinet or box applications where frequent opening and closing is required without an environmental seal<BR/>Attachment via self-adhesive strip with high tack acrylic adhesive (16.3N/10mm)<BR/>Service temperature -55°C → +230°C<BR/>Supplied in 500mm lengths with corrosion-resistant bright tin finish

Knitted Wire Gasket Strip Extra soft shielding strips designed for commercial enclosures, cabinets and panels requiring minimum closure force or where wide tolerance gaps exist<BR/>Constructed from a single layer of fine monel wire knitted over a soft closed cell neoprene sponge<BR/>Pressure sensitive self-adhesive strip along one edge allows easy application<BR/>Excellent shielding performance when gasket is compressed by only 25%<BR/>Dust and moisture protection (improved with up to 50% compression)<BR/>Service temperature -40°C to +80°C<BR/>Supplied in 10m lengths

Shielding plates Plates offering electromagnetic protection when making case seals.<BR/>Made from a carbon sheet and nickel, assembled using an adhesive.<BR/>Highly conductive plates with a very broad temperature range.

Shielding seals Made from beryllium copper, these seals are easy to use.<BR/>Made from a double-sided adhesive, which protects against both electromagnetic and radio-electrical interference.<BR/>Ideal for chassis, box assemblies, speakers, panel modules and doors on a Faraday cage etc.<BR/>Efficiency greater than 46 dB at 14 kHz and 108 dB at 10 GHz.<BR/>Galvanic compatibility is achieved through a large range of surface treatments.<BR/>High solvent resistance.

Copper Beryllium Finger Strips Copper beryllium finger strips provide a spring wiping action coupled with low electrical resistance<BR/>Ideal as an EMC gasket or earthing contact - optimum performance is achieved at 25% compression<BR/>Suitable for most enclosure door, cabinet or box applications where frequent opening and closing is required without an environmental seal<BR/>Attachment via self-adhesive strip with high tack acrylic adhesive (16.3N/10mm)<BR/>Service temperature -55°C → +230°C<BR/>Supplied in 500mm lengths with corrosion-resistant bright tin finish