Gems Sensors Float Switch
The Gems Sensors float switch is designed for higher temperatures and in pressurized or corrosive liquids. It is an exceptionally accurate and rugged switch.
It has mounting thread G1/4in
Warning:
The cable entry point must not be submerged under any circumstances
They must be fitted through the wall of a tank on the horizontal switches so that the cable is on the outside
On the vertical type, the mounting thread and cable entry must be above the highest level of the liquid Features and Benefits Operating pressure is 30bar
Depth of immersion is 30mm
Min SG of liquids is 0.75
Reed switch is SPST 100V Certifications IP64 rated
It has mounting thread G1/4in
Warning:
The cable entry point must not be submerged under any circumstances
They must be fitted through the wall of a tank on the horizontal switches so that the cable is on the outside
On the vertical type, the mounting thread and cable entry must be above the highest level of the liquid Features and Benefits Operating pressure is 30bar
Depth of immersion is 30mm
Min SG of liquids is 0.75
Reed switch is SPST 100V Certifications IP64 rated
Horizontal, Vertical Stainless Steel Float Switch, Float, 1m Cable, Relay
Manufacturer:
Gems SensorsManufacturer Part No:
010-3089
Enrgtech Part No:
ET16762644
Warranty:
Manufacturer
£ 109.50
Checking for live stock
Device Type:
Float
Mounting Type:
Horizontal, Vertical
Switch Output:
Relay
Body Material:
Stainless Steel
Cable Length:
1m
Minimum Operating Temperature:
-40°C
Maximum Operating Temperature:
+150°C
Maximum Pressure:
30bar
