Enabling Switch, JSHD Series The JSHD series from ABB Jokab offers the ability to operate machinery safely via a three position control device. Many different versions are available for a wide variety of applicational uses. Key features which have been incorporated within this series from ABB Jokab include a front button (for programme start, low speed, etc), a top button (for programme stop, grip devices, etc),a bottom plate (wide bottom plate for fixing interlocking devices and Eden (non-contact sensor) or narrow bottom plate for more flexible handling), a cable version (straight or spiral cable with connectors or assembled on the device), LED indication and finally the device is designed to work with a safety relay or PLC. Multiple uses in troubleshooting, test running and programming where no other protection is available or feasible<BR/>Key adavntages of the JSHD4 enabling device include it being ergonomic, adaptable and the device provides LED status information<BR/>Mechanical life of 1000000 cycles to the middle position<BR/>The body material consists of Polyamide 6.6<BR/>Operating force of approximately 15 N<BR/>High protection class rating of IP65<BR/>Insulation resistance of a minimum of 20 MΩ

Enabling Switch, JSHD Series The JSHD series from ABB Jokab offers the ability to operate machinery safely via a three position control device. Many different versions are available for a wide variety of applicational uses. Key features which have been incorporated within this series from ABB Jokab include a front button (for programme start, low speed, etc), a top button (for programme stop, grip devices, etc),a bottom plate (wide bottom plate for fixing interlocking devices and Eden (non-contact sensor) or narrow bottom plate for more flexible handling), a cable version (straight or spiral cable with connectors or assembled on the device), LED indication and finally the device is designed to work with a safety relay or PLC. Multiple uses in troubleshooting, test running and programming where no other protection is available or feasible<BR/>Key adavntages of the JSHD4 enabling device include it being ergonomic, adaptable and the device provides LED status information<BR/>Mechanical life of 1000000 cycles to the middle position<BR/>The body material consists of Polyamide 6.6<BR/>Operating force of approximately 15 N<BR/>High protection class rating of IP65<BR/>Insulation resistance of a minimum of 20 MΩ

Enabling Switch, JSHD Series The JSHD series from ABB Jokab offers the ability to operate machinery safely via a three position control device. Many different versions are available for a wide variety of applicational uses. Key features which have been incorporated within this series from ABB Jokab include a front button (for programme start, low speed, etc), a top button (for programme stop, grip devices, etc),a bottom plate (wide bottom plate for fixing interlocking devices and Eden (non-contact sensor) or narrow bottom plate for more flexible handling), a cable version (straight or spiral cable with connectors or assembled on the device), LED indication and finally the device is designed to work with a safety relay or PLC. Multiple uses in troubleshooting, test running and programming where no other protection is available or feasible<BR/>Key adavntages of the JSHD4 enabling device include it being ergonomic, adaptable and the device provides LED status information<BR/>Mechanical life of 1000000 cycles to the middle position<BR/>The body material consists of Polyamide 6.6<BR/>Operating force of approximately 15 N<BR/>High protection class rating of IP65<BR/>Insulation resistance of a minimum of 20 MΩ

<B>ABB Jokab Safety Enabling Switch, 3 Positions, 200mA Supply Current - JSHD Series - 2TLA019995R0200</B> Safely stop your machines while working in dangerous areas with this safety enabling switch from ABB Jokab. It halts equipment when pressed too firmly or released completely, making it easy to pause processes before there's a risk of injury. With its ergonomic design, the device is comfortable to use for long periods, even when you're wearing gloves. By halting instead of deactivating machines, the unit reduces the time needed to resume work after an inspection has been completed, improving efficiency. <B>Features & Benefits</B> • Two extra programmable buttons provide convenient control over non-safety functions like machine movement<BR/>• Robust PA housing protects the unit against impact<BR/>• IP65 rating indicates full protection against dust and light water jets, making the device suitable for demanding industrial conditions<BR/>• LED indicator lights clearly show machine status to keep you informed <B>Applications</B> • Semiconductor manufacturing<BR/>• Robotics<BR/>• Printing industry<BR/>• Chemical processing plants <B>What types of power supply can I use this safety switch with?</B> The tool has a voltage rating of 50V AC/DC, so you can use it with both AC and DC power supplies.

<B>ABB Jokab Contactor, +70°C Maximum Operating Temperature, 6kV Rated Impulse Withstand Voltage - AFS Series - 1SBL236082R3022 AFS26Z-30-22-30</B> To stay on top of power flow, control and switch your equipment with this contactor from ABB Jokab. It comes with pre-installed front-facing auxiliary contact blocks, so telling your machinery when to get going is a breeze. The device has a mechanical switching duration of 3,600 cycles per hour, so you can rest assured that it's low-maintenance and built to last a long time. Spotting it in a busy setup isn't a problem, thanks to the yellow front housing. <B>Features & Benefits</B> • Built-in surge suppressor safeguards your machinery from damage<BR/>• Delivers reliable protection from transient overvoltage, thanks to its 6kV rated impulse withstand voltage<BR/>• Simple DIN-rail mounting style eliminates the need for complex tools<BR/>• Screw terminals ensure secure vibration-resistant electrical connections <B>Applications</B> • Thermal evaporators<BR/>• Residential lighting<BR/>• Electric heaters <B>What's the operating temperature range of this component?</B> When fitted with a thermal O/L relay, this unit has an operating temperature range of -25°C to +60°C. Without a relay it operates at -40°C to +70°C. <B>What's the device's contact configuration?</B> It's fixed at 2NO/2NC, so it handles both circuit activation and deactivation in one unit.

ABB Jokab AFS 3P Safety Contactor Relay The 3-Pole ABB Jokab safety contactor relay has a coil voltage 24VAC to 60VAC at 50/60Hz and 20 to 60VDC. It has a contact current rating 50A and contact voltage rating 600VAC. It reduces panel energy consumption. It is with the front marked symbol that guarantees the right contactor status. It has yellow housing for easy identification. Features and Benefits • Built-in surge suppression<BR/>• Control circuit with electronic coil interface<BR/>• Dedicated 24VDC for direct control by PLC output <BR/>• Front-mounted auxiliary contact block <BR/>• Minimum switching capacity 12V/3mA<BR/>• Mirror and mechanically linked contacts<BR/>• Protective cover to prevent manual operation Applications • Controlling circuits<BR/>• Machine safety applications<BR/>• Monitoring circuits Certifications • CSA certified C22.2 N°14<BR/>• EN 60947-1/60947-4-1<BR/>• IEC60947-1/60947-4-1<BR/>• UL 508

<B>ABB Jokab Contactor, With Built-In Surge Protection, Screw Terminals - AFS Series - 1SBL177082R1322 AFS16-30-22-13</B> Looking for a switching component that goes the extra mile? Try this contactor from ABB Jokab. A maximum mechanical switching frequency of 3,600 cycles per hour offers lightning-fast performance, even when the unit's feeling the pressure in systems carrying high currents. A yellow housing means the unit stands out in a crowd, for quick and easy identification on a busy circuit board. Built-in surge protection lets you save space and simplify your setup, as there's no need for an additional protective device. <B>Features & Benefits</B> • Screw terminals offer quick and easy wiring using only a screwdriver<BR/>• Protective cover prevents unauthorised or accidental adjustment of the device, for safety<BR/>• Resists shock and vibration, so it's compatible with harsh industrial environments<BR/>• IP20-rated terminals that are protected against touch and objects larger than 12mm <B>Applications</B> • Electric vehicles<BR/>• Lighting control systems<BR/>• Industrial automation<BR/>• Commercial buildings <B>What's the voltage control range of this contactor?</B> A wide control voltage range between 100 and 250V DC makes this component just what you need to take the reins in circuits with large power variations.

ABB Jokab AFS 3P Safety Contactor Relay The 3-Pole ABB Jokab safety contactor relay has a coil voltage 24VAC to 60VAC at 50/60Hz and 20VDC to 60VDC. It has a contact current rating 70A and contact voltage rating 600VAC. It is with the front marked symbol that guarantees the right contactor status. Features and Benefits • Built-in surge suppression<BR/>• Control circuit with electronic coil interface<BR/>• Dedicated 24VDC for direct control by PLC output <BR/>• Front-mounted auxiliary contact block <BR/>• Minimum switching capacity 12V/3mA<BR/>• Mirror and mechanically linked contacts<BR/>• Protective cover to prevent manual operation Applications • Controlling circuits<BR/>• Machine<BR/>• Monitoring circuits

ABB Jokab AFS 3P Safety Contactor Relay The 3-Pole ABB Jokab safety contactor relay has a coil voltage 100VAC to 250VAC at 50/60Hz and 100VDC to 250VDC. It has a contact current rating 50A and contact voltage rating 600VAC. It reduces panel energy consumption. It is with the front marked symbol that guarantees the right contactor status. It has yellow housing for easy identification. Features and Benefits • Built-in surge suppression<BR/>• Control circuit with electronic coil interface<BR/>• Dedicated 24VDC for direct control by PLC output <BR/>• Front-mounted auxiliary contact block <BR/>• Minimum switching capacity 12V/3mA<BR/>• Mirror and mechanically linked contacts<BR/>• Protective cover to prevent manual operation Applications • Controlling circuits<BR/>• Machine<BR/>• Monitoring circuits Certifications • CSA certified C22.2 N°14<BR/>• EN 60947-1/60947-4-1<BR/>• IEC60947-1/60947-4-1<BR/>• UL 508

ABB Jokab AFS 3P Safety Contactor Relay The 3-Pole ABB Jokab safety contactor relay has a coil voltage 100VAC to 250VAC at 50/60Hz and 100VDC to 250VDC. It has a contact current rating 70A and contact voltage rating 600VAC. It is with the front marked symbol that always guarantees the right contactor status. Features and Benefits • Built-in surge suppression<BR/>• Control circuit with electronic coil interface<BR/>• Dedicated 24VDC for direct control by PLC output <BR/>• Front-mounted auxiliary contact block <BR/>• Minimum switching capacity 12V/3mA<BR/>• Mirror and mechanically linked contacts<BR/>• Protective cover to prevent manual operation Applications • Controlling circuits<BR/>• Machine<BR/>• Monitoring circuits Certifications • CSA certified C22.2 N°14<BR/>• EN 60947-1/60947-4-1<BR/>• IEC60947-1/60947-4-1<BR/>• UL 508

ABB Jokab AFS 3P Safety Contactor Relay The 3-Pole ABB Jokab safety contactor relay has a coil voltage 100VAC to 250VAC at 50/60Hz and 100 to 2500VDC. It has a contact current rating 50A and contact voltage rating 600VAC. It reduces panel energy consumption. It is with the front marked symbol that guarantees the right contactor status. It has yellow housing for easy identification. Features and Benefits • Built-in surge suppression<BR/>• Control circuit with electronic coil interface<BR/>• Dedicated 24VDC for direct control by PLC output <BR/>• Front-mounted auxiliary contact block <BR/>• Minimum switching capacity 12V/3mA<BR/>• Mirror and mechanically linked contacts<BR/>• Protective cover to prevent manual operation Applications • Controlling circuits<BR/>• Machine safety applications<BR/>• Monitoring circuits Certifications • CSA certified C22.2 N°14<BR/>• EN 60947-1/60947-4-1<BR/>• IEC60947-1/60947-4-1<BR/>• UL 508

ABB Jokab AFS 3P Safety Contactor Relay The 3-Pole ABB Jokab safety contactor relay has a coil voltage 24VAC to 60VAC at 50/60Hz and 20 to 60VDC. It has a contact current rating 45A and contact voltage rating 600VAC. It reduces panel energy consumption. It is with the front marked symbol that guarantees the right contactor status. It has yellow housing for easy identification. Features and Benefits • Built-in surge suppression<BR/>• Control circuit with electronic coil interface<BR/>• Dedicated 24VDC for direct control by PLC output <BR/>• Front-mounted auxiliary contact block <BR/>• Minimum switching capacity 12V/3mA<BR/>• Mirror and mechanically linked contacts<BR/>• Protective cover to prevent manual operation Applications • Controlling circuits<BR/>• Machine safety applications<BR/>• Monitoring circuits Certifications • CSA certified C22.2 N°14<BR/>• EN 60947-1/60947-4-1<BR/>• IEC60947-1/60947-4-1<BR/>• UL 508