The Ribbon Cable used for Raspberry Pi Model with an interfaces of GPIO. Length is 173mm<BR/>Weight is 14.4 g

Micro Lipo - USB charger Adafruit have now created one of the smallest USB LiPo chargers available, so it is perfect to keep in any project box. Simply plug in the gold plated contacts into any USB port and a 3.7V/4.2V lithium polymer/lithium ion rechargeable battery into the JST plug on the other end. There are two LEDs - one red and one green. While charging, the red LED is lit. When the battery is fully charged and ready for use, the green LED turns on. Once you know all this, you are good to go. 5V input via PCB-style USB connector<BR/>2-pin JST cable included<BR/>100mA charge current, adjustable to 500mA by soldering a jumper closed

Flora Wearable Ultimate GPS Module This Adafruit GPS module is the best way to add GPS to your wearable project. It is part of the Adafruit Flora series of wearable electronics, designed specifically for use with the Flora motherboard. This specially designed module is small and simple but incredibly powerful. All models are highly reliable and excellent quality. Fix status LED<BR/>Built-in datalogging<BR/>-165 dBm sensitivity, 10 Hz updates, 66 channels<BR/>20mA current draw<BR/>Designed for wearable use with the Flora system

Adafruit PN532 NFC/RFID Controller Shield for Ardunio This controller shield is the Adafruit PN532 breakout board which has been remastered into the perfect shield. A great tool for any 13.56MHz RFID or NFC application. The Adafruit NFC shield uses the PN532 chip-set and is what is embedded in almost every phone or device that does NFC. This particular model is highly reliable and excellent quality. This board/chip uses I2C 7-bit address 0x48<BR/>2.1" (53.3 mm) x 4.7" (117.7 mm) and 0.425" (1.1 mm) thick

T-Cobbler for Raspberry Pi A+/B+/Pi 2, Adafruit The Adafruit T-Cobbler Plus is an add-on prototyping board designed for the B+ and Pi 2. This breakout kit is a T shape making it easier to read the labels as all the pins are labelled. It can break out all those huge power, GPIO, I2C and SPI pins from the 40-pin header onto a solderless breadboard. This set makes "cobbling together" prototypes with the Pi effective and easy. The kit is designed to use with ant 2x20 connector style Raspberry Pi and will require some soldering<BR/><BR/><B>What's on board ?</B><BR/><BR/>40 pin ribbon cable<BR/><BR/>T cobbler PCB<BR/><BR/>40 pin GPIO socket<BR/><BR/>Male Header Strips<BR/><BR/><B>PCB dimensions</B><BR/><BR/>73mm x20 mm x2 mm/2.9" x0.8" x0.08"<BR/><BR/>Width at top of T:58mm/2.3"<BR/><BR/> Weight :7g<BR/>

<B>Adafruit 746 Ultimate GPS Breakout Board</B> The <B>Adafruit 746</B> Ultimate GPS Module is a breakout board based on the MTK3339 GPS SoC. This add-on board enables you to add quality GPS functionality to your base board or breadboard. It is called the &#147;Ultimate&#148; GPS module as it provides you with great GPS functionality, plus lots of bonus extras.<BR/>This module is great for working with the MTK3339 chipset on applications such as; smartphones, vehicles, personal trackers, digital cameras and other industrial applications. Its high sensitivity makes it ideal for dense environments, such as busy cities. <BR/> &#149; Fully assembled<BR/>&#149; High quality<BR/>&#149; High sensitivity: -165 dBm <BR/>&#149; Built-in ceramic patch antenna<BR/>&#149; Built-in data logging<BR/>&#149; Automatic antenna switching<BR/> <B>More about the MTK3339 …</B><BR/>The MTK3339 is a GPS System on Chip (SoC). This extremely small GPS module offers both high quality and high sensitivity. The module features a built-in patch antenna but you can also add an external 3V active antenna via the u.FL connector, if you wish. The MTK3339 also features built-in data logging for recording track, time and location.<BR/>It can track up to 22 satellites on 66 channels and has a sensitivity of -165 dBm. Alongside this, the MTK3339 offers low power operation at just 20mA during navigation operations. <BR/><BR/><B>What else is on-board?</B><BR/>In addition to the MTK3339 chipset, there is a 3.3V LDO regulator which enables you to power the module with 3.3-5 Vdc. There is an &#147;ENABLE&#148; pin to switch the module off using an MCU pin or switch, plus there is the option to add a CR1220 coin cell battery to keep the RTC running. <BR/>A Red LED is there to blink at 1Hz while searching for satellites, and to blink every 15 seconds when a fix is found, to conserve power. <BR/><BR/><B>What is GPS?</B><BR/>GPS stands for Global Positioning System and is a navigation system that utilises satellites. GPS is able to provide information on locations, velocity and time. It is a popular navigational system used in cars, trucks, boats and aeroplanes. <BR/><BR/><B>Versions Available:</B><BR/><a href="/web/p/products/9054630">905-4630</a> - box of 1<BR/><a href="/web/p/products/1734049">173-4049</a> - box of 10<BR/>