Euro Ball Transfer Unit Pre-lubricated ball transfer units to move or transfer loads in all directions. Max speed 1m/sec. Available in a wide choice of load capacities, sizes and fixings. Operating temperatures -30°C to 70°C (continuous use, depending on seals used). Features and Benefits Main bearing cup toughened steel<BR/>Felt or plastic seal (except 15mm)<BR/>Self-cleaning hole<BR/>Flange type fitting Fixing Clip Fixing clips that allow fixing from either the top side of a ball deck or the underside. Suitable for deck thicknesses up to 4mm.

Euro Ball Transfer Unit Pre-lubricated ball transfer units to move or transfer loads in all directions. Max speed 1m/sec. Available in a wide choice of load capacities, sizes and fixings. Operating temperatures -30°C to 70°C (continuous use, depending on seals used). Features and Benefits Main bearing cup toughened steel<BR/>Felt or plastic seal (except 15mm)<BR/>Self-cleaning hole<BR/>Flange type fitting Fixing Clip Fixing clips that allow fixing from either the top side of a ball deck or the underside. Suitable for deck thicknesses up to 4mm.

Euro Ball Transfer Unit Pre-lubricated ball transfer units to move or transfer loads in all directions. Max speed 1m/sec. Available in a wide choice of load capacities, sizes and fixings. Operating temperatures -30°C to 70°C (continuous use, depending on seals used). Features and Benefits Main bearing cup toughened steel<BR/>Felt or plastic seal (except 15mm)<BR/>Self-cleaning hole<BR/>Flange type fitting Fixing Clip Fixing clips that allow fixing from either the top side of a ball deck or the underside. Suitable for deck thicknesses up to 4mm.

Flange Fitting Ball Transfer Units Pre-lubricated ball transfer units to move or transfer loads in any direction. Max speed 1m/sec. Manufactured to general tolerance of ±0.3mm. Plated with zinc/iron alloy finish for protection in use. Operating temperature -30°C to +70°C (continuous use, depending on seals used). Pattern Heviload 3<BR/>Bottom flange fixing

Press Fit Ball Transfer Units Pre-lubricated ball transfer units to move or transfer loads in any direction. Max speed 1m/sec. Manufactured to general tolerance of ±0.3mm. Plated with zinc/iron alloy finish for protection in use. Operating temperature -30°C to +70°C (continuous use, depending on seals used). Pattern Heviload 0<BR/>Robust body<BR/>Flange type fitting

Inverted Flange Fitting Ball Transfer Units Pre-lubricated ball transfer units to move or transfer loads in any direction. Max speed 1m/sec. Manufactured to general tolerance of ±0.3mm. Plated with zinc/iron alloy finish for protection in use. Operating temperature -30°C to +70°C (continuous use, depending on seals used). Pattern Heviload 2<BR/>Top flange fixing

ALWAYSE Hevi-load Ball Transfer Unit The ALWAYSE inverted flange mount Hevi-load ball transfer unit is a highly efficient device with a maximum load capacity is 1000kg. This unit is used to move or transfer loads in all direction with a maximum speed of 1m/s. This unit is plated with zinc/iron alloy finish for protection in use and is available in a wide choice of load capacities, sizes and fixings. Features and Benefits Ball diameter is 38.1mm<BR/>Two spanner flats for fixing and removing<BR/>Case material is steel<BR/>Flange length and width is 76.2mm <BR/>Inverted flange mount<BR/>Load ball material is steel<BR/>Operating temperature ranging between -30°C and 70°C Certifications ANSI/ESD S20.20:2014<BR/>BS EN 61340-5-1:2007

ALWAYSE Heavy-Load Ball Transfer Unit The ALWAYSE spring-loaded mount Heavy-Load ball transfer unit is a highly efficient device with a maximum load capacity is 25kg. This unit is used to move or transfer loads in all direction with a maximum speed of 1m/s. This unit is plated with zinc/iron alloy finish for protection in use and is available in a wide choice of load capacities, sizes and fixings. Features and Benefits Ball diameter is 12.7mm<BR/>Case material is steel<BR/>Greater shock loading protection<BR/>Interference fitting<BR/>Compact<BR/>Load ball material is steel<BR/>Operating temperature ranging between -30°C and 70°C Certifications ANSI/ESD S20.20:2014<BR/>BS EN 61340-5-1:2007

Flange Fitting Ball Transfer Units Pre-lubricated ball transfer units to move or transfer loads in any direction. Max speed 1m/sec. Manufactured to general tolerance of ±0.3mm. Plated with zinc/iron alloy finish for protection in use. Operating temperature -30°C to +70°C (continuous use, depending on seals used). Pattern Heviload 3<BR/>Bottom flange fixing

Press Fit Ball Transfer Units Pre-lubricated ball transfer units to move or transfer loads in any direction. Max speed 1m/sec. Manufactured to general tolerance of ±0.3mm. Plated with zinc/iron alloy finish for protection in use. Operating temperature -30°C to +70°C (continuous use, depending on seals used). Pattern Heviload 0<BR/>Robust body<BR/>Flange type fitting

ALWAYSE Hevi-load Ball Transfer Unit The ALWAYSE bolt mount Hevi-load ball transfer unit is a highly efficient device with a maximum load capacity is 135kg. This unit is used to move or transfer loads in all direction with a maximum speed of 1m/s. This unit is plated with zinc/iron alloy finish for protection in use and is available in a wide choice of load capacities, sizes and fixings. Features and Benefits Ball diameter is 25.4mm<BR/>Two spanner flats for fixing and removing<BR/>Pattern Hevi-load 1<BR/>Bolt fixing<BR/>Case material is steel<BR/>Load ball material is steel<BR/>Operating temperature ranging between -30°C and 70°C Certifications ANSI/ESD S20.20:2014<BR/>BS EN 61340-5-1:2007

ALWAYSE Hevi-load Ball Transfer Unit The ALWAYSE bolt mount Hevi-load ball transfer unit is a highly efficient device with a maximum load capacity is 1000kg. This unit is used to move or transfer loads in all direction with a maximum speed of 1m/s. This unit is plated with zinc/iron alloy finish for protection in use and is available in a wide choice of load capacities, sizes and fixings. Features and Benefits Ball diameter is 38.1mm<BR/>Two spanner flats for fixing and removing<BR/>Pattern Hevi-load 1<BR/>Bolt fixing<BR/>Case material is steel<BR/>Load ball material is steel<BR/>Operating temperature ranging between -30°C and 70°C Certifications ANSI/ESD S20.20:2014<BR/>BS EN 61340-5-1:2007