This tilt level switch has been designed to provide high level measurement in silos or any other type of storage containers located in non-hazardous areas.Its operation is very simple: Vertically suspended at the desired high level point, the SOLIBA will tilt as the grain reaches the unit.To secure your facilities at a minimum cost, the installation of a SOLIBA high level mechanical tilt level switch is strongly recommended, even if your facilities are already equipped with other types of equipment such as: rotating paddles, vibrating forks, radars, capacitive and ultrasonic sensors, etc.The SOLIBA tilt level switch only operates when the high level is reached, unlike other types of level measurement devices that operate permanentlyThe tilt level switch must be installed at the opposite side of the arrival of grain and at a certain distance from the silo walls. This to ensure an optimal tilting operation. Cut out power 20AMaximum temperature 85 °C Protection index IP68

This hydrostatic level probe allows liquids measurement and monitoring in tanks, rivers and groundwater.The level measurement is carried out by measuring the differential pressure between the surface of the liquid and the position of the submerged transmitter. The pressure is converted into an electrical signal by piezo resistive technology and conditioned in a 4-20mA loop. Precision 1 %Hastelloy C276 sensor

This robust level regulator is equipped with internal ballast. As the liquid level reaches the regulator, the mechanical switch inside will tilt, thus closing or opening a circuit connected to an electrical panel.The AQUA MEDIUM is capable of penetrating the thick layers of grease found on waste water pumping stations, and it is the ideal level regulator for limited spaced applications.This model is also available in a bigger version. See AQUA XL. The AQUA MEDIUM level regulator is not suitable for agitated liquids. Please choose our float switch models: BIP STOP, AT 120, or ATS 165. Maximum pressure 3.5 barMaximum temperature 70°C Protection index IP68

This small tubular float level sensor is equipped with a TEFLON cable and a specially designed PTFE housing for extremely aggressive liquids, such as for example sulfuric acid and very hot liquids reaching temperatures up to 125°C.The TUBA 125 C level sensor has a ball inside a sealed polypropylene cylinder that will activate a microswitch according to its position. This principle is extremely reliable.The small diameter of this float (Ø 40 mm) allows its introduction by small holes often placed on the vertical walls of the tanks. Maximum pressure 1 barMaximum temperature 150°C Protection index IP68

This hydrostatic level probe allows liquids measurement and monitoring in tanks, rivers and groundwater.The level measurement is carried out by measuring the differential pressure between the surface of the liquid and the position of the submerged transmitter. The pressure is converted into an electrical signal by piezo resistive technology and conditioned in a 4-20mA loop. Hastelloy C276 sensorVoltage range 8 to 36 VDC

The AQUA XL is a robust level regulator with internal ballast. As the liquid level reaches the regulator, the mechanical switch inside will tilt, thus closing or opening a circuit connected to an electrical panel. Thanks to its heavy weight (775g), the AQUA XL is capable of penetrating the thick layers of grease found on waste water pumping stationsThis model is also available in a smaller version for limited space applications. See AQUA MEDIUM.The AQUA XL level regulator is not suitable for agitated liquids. Please choose our float switches models: BIP STOP, AT 120, or ATS 165. Maximum pressure 2 barMaximum temperature 70°C Protection index IP68

The ATMI LESTS 200g counterweight which is plastic ballast for float and tilt level switches. The adjustable ballasts is to define the pivot point of the float level switch. A ballast is particularly needed when the float is equipped with more than 1 meter of cable. EconomicMore precise detection

The SOLIBA M is a small membrane level detector for non-explosive areas which detects the high, low and / or intermediate level in the hoppers or small containers and the indications of stuffing in the endless wires and other types of transport.Positioned inside of the hopper or silo, the SOLIBA M membran level detector is actuated by a membrane. The operation of the detector is the result of the pressure exerted by the bulk material against the membrane. It can be used for powdery and granular products with easy flow and with a specific weight between 0.3 and 2.5 t/m³.The choice of a SOLIBA M level detector is highly recommended to secure your installations for a minimum cost, even if they are equipped with other types of equipment such as rotary paddles, vibrating blades, capacitive probes, ultrasound, radars, etc. . Cut out power 16AMaximum temperature 60 °C Protection index IP44

This ATEX certified float switch is ideal for hazardous environments 0, 1, 2 (gas) and 20, 21, 22 (dust). This float is encased in a HR HY (High Resistance HYpalon) press-vulcanised housing, which ensures a double waterproof, can ensure a regulation in very agressive liquids.The SOBA EX ATEX certified level regulator are equipped with an external loaded resin ballast 250 g, adjustable on the cable, which facilitates the rotation point of the level sensor and allows it to work in a wide range of densities.Thanks to its +/- 25° switching angle, the SOBA ensures a very precise level measurement. The device can also be used in high or low alarm. Maximum pressure 4 barMaximum temperature 70°C Protection index IP68

This small tubular float level sensor is equipped with a TEFLON cable and a specially designed PTFE housing for extremely aggressive liquids, such as for example sulfuric acid and very hot liquids reaching temperatures up to 125°C.The TUBA 125 C level sensor has a ball inside a sealed polypropylene cylinder that will activate a microswitch according to its position. This principle is extremely reliable.The small diameter of this float (Ø 40 mm) allows its introduction by small holes often placed on the vertical walls of the tanks. Maximum pressure 1 barMaximum temperature 150°C Protection index IP68

This robust level regulator is equipped with internal ballast. As the liquid level reaches the regulator, the mechanical switch inside will tilt, thus closing or opening a circuit connected to an electrical panel.The AQUA MEDIUM is capable of penetrating the thick layers of grease found on waste water pumping stations, and it is the ideal level regulator for limited spaced applications.This model is also available in a bigger version. See AQUA XL. The AQUA MEDIUM level regulator is not suitable for agitated liquids. Please choose our float switch models: BIP STOP, AT 120, or ATS 165. Maximum pressure 3.5 barMaximum temperature 70°C Protection index IP68

This ACS certified float level switch is constructed with special components with internal ballast for use in drinking water applications.As the liquid level reaches the unit, the mechanical switch inside will tilt, thus closing or opening a circuit connected to an electrical panel.Thanks to its +/- 10° switching angle the float can ensures a very precise level measurement thanks. Also it can be used in high or low alarm.However, the AQUA MEDIUM EP level regulator is not suitable for agitated liquids by the presence of an agitator or in a water tower. Please choose our float switch model: ATS 165 EP, ACS certified.For pump control of several levels with several pumps in calm liquid with a float level switch equipped with a stainless steel adjustable ballast, choose the SOBA EP, ACS certified. Maximum pressure 3.5 barMaximum temperature 85°C Protection index IP68