The Balluff single-ended cordset is used for signals, data and power transmission. It is a PVC grey, 10m, drag chain compatible cable having M12x1-female, angled, 5-pin, A-coded connection with 3 conductors and 4.0 A rated current (at 40 °C). 0.34 mm² Conductor cross-section-40 °C to 105 °C cable temperature at fixed routing-5 °C to 105 °C cable temperature at flexible routing250 VDC/ 250 VAC Operating voltage UbIP67, IP68, IP69K protection ratingCE, cULus, EAC, WEEE Approval/Conformity

The Balluff field attachable connector is used for the secure transmission of signals, data and power. It has M12x1-male, straight, 5-pin, A-coded connection with 5 connectable contacts and 4.0 A rated current (at 40 °C). Screw terminals wire mounting0.14 to 0.75 mm² Connection cross-section4 to 6 mm Cable diameter D125 VDC / 125 VAC Operating voltage UbIP67 protection rating-40 °C to 85 °C ambient temperatureCE, cURus, EAC, WEEE Approval/Conformity

The Balluff field attachable connector is used for the secure transmission of signals, data and power. It has M12x1-female, angled, 5-pin, A-coded connection with 5 connectable contacts and 4.0 A rated current (at 40 °C). Screw terminals wire mounting0.14 to 0.75 mm² Connection cross-section4 to 6 mm Cable diameter D125 VDC / 125 VAC Operating voltage UbIP67 protection rating-40 °C to 85 °C ambient temperatureCE, cURus, EAC, WEEE Approval/Conformity

The Balluff field attachable connector is used for the secure transmission of signals, data and power. It has M12x1-male, straight, 5-pin, A-coded connection with 5 connectable contacts and 4.0 A rated current (at 40 °C). Screw terminals wire mounting0.14 to 0.75 mm² Connection cross-section6 to 8 mm Cable diameter D125 VDC / 125 VAC Operating voltage UbIP67 protection rating-40 °C to 85 °C ambient temperatureCE, cURus, EAC, WEEE Approval/Conformity

The Balluff single-ended cordset is used for signals, data and power transmission. It is a PVC grey, 20m, drag chain compatible cable having M12x1-female, straight, 5-pin, A-coded connection with 4 conductors and 4.0 A rated current (at 40 °C). Complementary switching output-40 °C to 105 °C cable temperature at fixed routing-5 °C to 105 °C cable temperature at flexible routing0.34 mm² Conductor cross-section250 VDC / 250 VAC Operating voltage UbIP67, IP68, IP69K protection ratingCE, cULus,

The Balluff Inductive sensor BES series standard sensors used for detecting objects in metal areas are robust and reliable. With a wide range of over 500 model series, we offer the right inductive sensor for every application. The technology, which is in use worldwide, has an optimum price/performance ratio and can also be delivered in a short amount of time even in large quantities. Housing material brass, PTFE coatedMaterial sensing surface LCPSwitching frequency 1000 HzShort-circuit protectionPolarity reversal protected

The Balluff Inductive sensor BES series standard sensors used for detecting objects in metal areas are robust and reliable. With a wide range of over 500 model series, we offer the right inductive sensor for every application. The technology, which is in use worldwide, has an optimum price/performance ratio and can also be delivered in a short amount of time even in large quantities. Housing material brass, Nickel-free coatedMaterial jacket PVCMaterial sensing surface PBTNumber of conductors 3Switching frequency 800 HzShort-circuit protectionPolarity reversal protected

The Balluff Inductive sensor BES series standard sensors used for detecting objects in metal areas are robust and reliable. With a wide range of over 500 model series, we offer the right inductive sensor for every application. The technology, which is in use worldwide, has an optimum price/performance ratio and can also be delivered in a short amount of time even in large quantities. Housing material brass, nickel platedMaterial jacket PVCMaterial sensing surface PA 12Number of conductors 3Switching frequency 2500 HzPolarity reversal protected Short-circuit protection

3 / 4-Wire Flush Inductive Proximity Sensors Features and benefits Can be embedded in metal with a minimal flush free zone Short circuit and polarity reversal protection LED for visual indication of output state

The Balluff inductive standard sensors with preferred types for detecting objects in metal areas are robust and reliable. It is available in wide range and offer right inductive sensor for every application. This technology is used worldwide with an optimum price/performance ratio and delivered in a short amount of time even in large quantities. Dimension is 18 x 35 mm M18x1 connector type Installation for non-flush mounting Operating range is 8 mm Switching output PNP normally open (NO) Switching frequency is 500 Hz Housing material is made up of brass, nickel-free coated Material sensing surface PBT Connector is M12x1-male type with 3-pin Operating voltage is between 10 to 30 VDC Ambient temperature is between -25 to 70 °C IP rating IP68

BES 3 / 4 Wire M12 Inductive Proximity Sensors This range of M12 cylindrical inductive proximity sensors from the BALLUFF BES series are designed to be used in a wide variety of metal detection applications with in industrial environments. Pre cabled or connector Flush shielded or non-flush unshielded 3 & 4 wire DC configuration

BMF Pneumatic Cylinder Position Sensors This range of magnetic position sensors from the BALLUFF BFM series are specifically designed to detect the position of the piston along a pneumatic cylinder with in industrial environments. Features and benefits 0.3 m pre-cabled M12 or M8 connector 3 wire DC configuration Short-circuit protected Includes function indicator