Belimo Modulating Damper Actuator The Belimo valve motor actuator has a modulating control type. This is compatible with all the leading makes of HVAC controls, also available are linkage kits to Satchwell MB or ESBE valves. This actuator operates on stall torque technology, which does not require end switches. Modulating a rotary actuator in connection with a mounting kit is used for the motorisation of the most common mixing valves in HVAC systems. It requires 24VAC/VDC supply voltage. Features and Benefits Power consumption is 1.5WMotor torque is 10Nm Noise level is 35dB Push button manual overrideDirection of rotation changeover switchMaintenance-free slipper valve actuator Certifications CE according to 89/336/EECEN 60730-1CE certified

Belimo Damper Actuator The Belimo damper actuator has an open/close control type. This actuator has an adjustable U-clamp, which accepts round or square shafts. It is a rotary/louver actuator. It is compatible with all the leading makes of HVAC controls. The damper actuator is used for adjusting air dampers in ventilation and air-conditioning system installed in buildings. This actuator operates on stall torque technology, which does not require end switches. The damper actuator has no limit switches and is overload proof. It requires a 240VAC/VDC supply voltage. Features and Benefits Operation life is minimum 60000 Pushbutton manual override Direction change switch Cable length is 1m Ambient temperature ranges between -30°C and 50°CRated impulse voltage is 0.8kVMaintenance freePower consumption is 2.5W Maximum damper area is 2m²Damper spindle compatibility ranges between 8mm and 26.7mmMotor torque is 10Nm Noise level is 35dB Applications Suitable to use with LM, NM, SM, and GM damper actuators Certifications IP54 rated CE according to 89/336/EEC92/31/EECUL Enclosure Type 2IEC/EN 60730-1IEC/EN 60730-2-14

Belimo Damper Actuator The Belimo damper actuator has an open/close control type. This actuator has an adjustable U-clamp, which accepts round or square shafts. It is a rotary/louver actuator. It is compatible with all the leading makes of HVAC controls. The damper actuator is used for adjusting air dampers in ventilation and air-conditioning system installed in buildings. This actuator operates on stall torque technology, which does not require end switches. The damper actuator has no limit switches and is overload proof. It requires a 230VAC/VDC supply voltage.Optional auxiliary switch (stock no. 504-1545) suitable for use with LM, NM, SM, and GM damper actuators, features 2xSPDT switches rated at 3 (0.5)A 250Vac and supplied with 1m of cable. Features and Benefits Operation life is minimum 60000 Pushbutton manual override Direction change switch Cable length is 1m Ambient temperature ranges between -30°C and 50°CRated impulse voltage is 0.8kVMaintenance-freePower consumption is 5W Maximum damper area is 8m²Damper spindle compatibility ranges between 12mm and 26.7mmMotor torque is 40Nm Noise level is 45dB Certifications IP54 rated CE according to 89/336/EEC92/31/EECUL Enclosure Type 2IEC/EN 60730-1IEC/EN 60730-2-14

Belimo Damper Actuator The Belimo damper actuator has a modulating control type. This actuator has an adjustable U-clamp, which accepts round or square shafts. It is a rotary/louver actuator. It is compatible with all the leading makes of HVAC controls. The damper actuator is used for adjusting air dampers in ventilation and air-conditioning systems installed in buildings. This actuator operates on stall torque technology, which does not require end switches. The damper actuator has no limit switches and is overload proof. It requires 24VAC/VDC supply voltage.Optional auxiliary switch (stock no. 504-1545) suitable for use with LM, NM, SM, and GM damper actuators, features 2xSPDT switches rated at 3 (0.5)A 250Vac and supplied with 1m of cable. Features and Benefits Operation life is minimum 60000 Pushbutton manual override Direction change switch Cable length is 1m Ambient temperature ranges between -30°C and 50°CMaintenance freeLow power consumption up to 2W Maximum damper area is 2m²Damper spindle compatibility ranges between 8mm and 26.7mmMotor torque is 10Nm Noise level is 35dB Certifications IP54 rated CE according to 89/336/EEC92/31/EECUL Enclosure Type 2IEC/EN 60730-1IEC/EN 60730-2-14

Belimo Damper Actuator The Belimo damper actuator has an open/close control type. This actuator has an adjustable U-clamp, which accepts round or square shafts. It is a rotary/louver actuator. It is compatible with all the leading makes of HVAC controls. The damper actuator is used for adjusting air dampers in ventilation and air-conditioning systems in the building. This actuator operates on stall torque technology, which does not require end switches. The damper actuator has no limit switches and is overload proof. It requires 24VAC/VDC supply voltage. This actuator has an integrated 1xSPDT 3 (0.5)A 250Vac auxiliary switch. Features and Benefits Operation life is minimum 60000 Pushbutton manual override Direction change switch Cable length is 1m Ambient temperature ranges is between -30°C and 50°CRated impulse voltage is 0.8kVMaintenance freePower consumption is 1W Maximum damper area is 1m²Damper spindle compatibility is between 6mm and 20mmMotor torque is 5Nm Noise level is 35dB Certifications IP54 ratedCE according to 89/336/EEC92/31/EECUL Enclosure Type 2IEC/EN 60730-1IEC/EN 60730-2-14

Belimo Damper Actuator The Belimo damper actuator has a modulating control type. This actuator has an adjustable U-clamp, which accepts round or square shafts. It is a rotary/louver actuator. It is compatible with all the leading makes of HVAC controls. The damper actuator is used for adjusting air dampers in ventilation and air-conditioning systems in buildings. This actuator operates on stall torque technology, which does not require end switches. The damper actuator has no limit switches and is overload proof. It requires 24VAC/VDC supply voltage.Optional auxiliary switch (stock no. 504-1545) suitable for use with LM, NM, SM, and GM damper actuators, features 2xSPDT switches rated at 3 (0.5)A 250Vac and supplied with 1m of cable. Features and Benefits Operation life is minimum 60000 Pushbutton manual override Direction change switch Cable length is 1m Ambient temperature ranges between -30°C and 50°CRated impulse voltage is 0.8kVMaintenance freeLow power consumption up to 1W Maximum damper area is 1m²Damper spindle compatibility ranges between 6mm and 20mmMotor torque is 5Nm Noise level is 35dB Applications Suitable to use with LM, NM, SM, and GM damper actuators Certifications IP54 rated CE according to 89/336/EEC92/31/EECUL Enclosure Type 2IEC/EN 60730-1IEC/EN 60730-2-14

Belimo Damper Actuator The Belimo damper actuator has an open/close control type. This actuator has an adjustable U-clamp, which accepts round or square shafts. It is a rotary/louver actuator. It is compatible with all the leading makes of HVAC controls. The damper actuator is fitted with a universal spindle clamp for quick and easy mounting directly on the damper spindle. The actuator is supplied with an ant rotation strap for fixing it at a position. This actuator operates on stall torque technology, which does not require end switches. The damper actuator has no limit switches and is overload proof. It requires a 240VAC/VDC supply voltage.Optional auxiliary switch (stock no. 504-1545) suitable for use with LM, NM, SM, and GM damper actuators, features 2xSPDT switches rated at 3 (0.5)A 250Vac and supplied with 1m of cable. Features and Benefits Operation life is minimum 60000 Pushbutton manual override Direction change switch Cable length is 1m Ambient temperature ranges between -30°C and 50°CRated impulse voltage is 4kVMaintenance freeLow power consumption up to 2.5W Maximum damper area is 4m²Damper spindle compatibility ranges between 10mm and 20mmMotor torque is 20Nm Noise level is 45dBDamper spindle size ranges between 10mm and 20mm Certifications IP54 rated CE according to 89/336/EEC92/31/EECUL Enclosure Type 2IEC/EN 60730-1IEC/EN 60730-2-14

Belimo Damper Actuator The Belimo damper actuator has an open/close control type. This actuator has an adjustable U-clamp, which accepts round or square shafts. It is a rotary/louver actuator. It is compatible with all the leading makes of HVAC controls. The damper actuator for is used to adjust air dampers in ventilation and air-conditioning systems in buildings. This actuator operates on stall torque technology, which does not require end switches. The damper actuator has no limit switches and is overload proof. It requires 24VAC/VDC supply voltage.Optional auxiliary switch (stock no. 504-1545) suitable for use with LM, NM, SM, and GM damper actuators, features 2xSPDT switches rated at 3 (0.5)A 250Vac and supplied with 1m of cable. Features and Benefits Operation life is minimum 60000 Pushbutton manual override Direction change switch Cable length is 1m Ambient temperature ranges between -30°C and 50°CRated impulse voltage is 0.8kVMaintenance freePower consumption is 1W Maximum damper area is 1m²Damper spindle compatibility is between 6mm and 20mmMotor torque is 5Nm Noise level is 35dB Certifications IP54 ratedCE according to 89/336/EEC92/31/EECUL Enclosure Type 2IEC/EN 60730-1IEC/EN 60730-2-14

Belimo Modulating Damper Actuator The Belimo modulating damper actuator has an adjustable U-clamp, which accepts round or square shafts. It is a rotary/louver actuator. It is compatible with all the leading makes of HVAC controls. This actuator operates on stall torque technology, which does not require end switches. It requires 24VAC/VDC supply voltage.Optional auxiliary switch (stock no. 504-1545) suitable for use with LM, NM, SM, and GM damper actuators, features 2xSPDT switches rated at 3 (0.5)A 250Vac and supplied with 1m of cable. Features and Benefits Operation life is minimum 60000 Pushbutton manual override Direction change switch Cable length is 1m Ambient temperature ranges between -30°C and 50°CRated impulse voltage is 4kVMaintenance-freeLow power consumption up to 2W Maximum damper area is 4m²Damper spindle compatibility ranges between 10mm and 20mmMotor torque is 20Nm Noise level is 45dB Certifications IP54 rated NEMA2UL Enclosure Type 2IEC/EN 60730-1IEC/EN 60730-2-14

Valve Motor "'Maintenance free slipper valve actuators designed for 60000 operations. Compatible with all leading makes of HVAC controls, also available are linkage kits to Satchwell MB or ESBE valves." Stall torque technology, eliminating the need for end switchesLow power consumptionVisible position indication dialPush button manual overrideDirection of rotation changeover switchRotation: 90°Run Time: 140s1m pre-wired cableUse with linkage kits, MS-NRS for Satchwell MB valves. Use MS-NRE for majority of ESBE, Termomix or Pommerening valves

Belimo Damper Actuator The Belimo damper actuator has an open/close control type. This actuator has an adjustable U-clamp, which accept round or square shafts. It is a rotary/louver actuator. It is compatible with all the leading makes of HVAC controls. The damper actuator is used for adjusting air dampers in ventilation and air-conditioning systems in buildings. This actuator operates on stall torque technology, which does not require end switches. The damper actuator has no limit switches and is overload proof. It requires 24VAC/VDC supply voltage.Optional auxiliary switch (stock no. 504-1545) suitable for use with LM, NM, SM, and GM damper actuators, features 2xSPDT switches rated at 3 (0.5)A 250Vac and supplied with 1m of cable. Features and Benefits Operation life is minimum 60000 Pushbutton manual override Direction change switch Cable length is 1m Ambient temperature ranges between -30°C and 50°CRated impulse voltage is 0.8kVMaintenance-freePower consumption is 4W Maximum damper area is 8m²Damper spindle compatibility ranges between 12mm and 26.7mmMotor torque is 40Nm Noise level is 45dB Certifications IP54 ratedCE according to 89/336/EEC92/31/EECUL Enclosure Type 2IEC/EN 60730-1IEC/EN 60730-2-14

Belimo Modulating Damper Actuator The Belimo Sf series damper actuator has a modulating control type. It is a spring return actuator with an emergency function for adjusting air dampers in ventilation and air conditioning systems in buildings. It has an adjustable U-clamp, which accepts round or square shafts. This actuator can be installed with a pre-tensioned spring. This product is controlled with a standard signal of DC 0V to 10 V and moves the damper to the operating position. It is overload proof, requires no limit switches. It requires 24VAC/VDC supply voltage. Features and Benefits The direction of rotation reversibleSpindle driver universal spindle clamp Operating voltage range is between 2VDC and 10VDC Running springtime is PVC connection cable length is 1m Motor and return torque is 20NmMaximum damper area is 4m²Damper spindle compatibility ranges between 10mm and 25.4mm Power consumption is 5WNoise level 40dBDamper spindle size is between 10mm and 25.4mmRated impulse voltage is 0.8kVMaintenance-freeService life min. 60,000 emergency positions Certifications UL 60730-1A UL 60730-2-14 CAN/CSA E60730-1:02 certifiedIEC/EN 60730-1 IEC/EN 60730-2-14