Bosch HSS-G Metric Jobber Drill Bits (DIN 338) Introducing the series of HSS-G Drill Bits from Bosch. These high-performance drill bits are designed to give a very clean, accurate holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron malleable cast iron, non-ferrous metals and hard plastic. The HSS-G drill bits enable up to 40% faster drilling rates and 50% lower feed pressure than standard HSS bits, with a chisel edge and split point drill tip manufactured to DIN338. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. Features and Benefits: • Features self-centring split-point for excellent positional accuracy and hole quality• 135° point angle design for maximum accuracy of application• No pre-punch or pilot required• Right-hand helical drill bits type N• Precision ground for a faster drilling rate and lower feed pressure• Spiral helix enables rapid swarf removal• Suitable for drilling in alloyed and non-alloyed steel up to tensile strength of 900N/m2• Suitable for both hand and machine use Approvals and Certification: • DIN338 • DIN1412C Quadruple Sharpening• Bosch Standard Quality Typical Applications: These bits are ideal for fast drilling of a plug, anchor or clearance holes in a number of materials such as steel, plastic, wood, metal etc. This makes it an essential piece of kit to have if you work within the carpentry/construction/engineering industries to save time and money on being able to perform more efficiently when working with stubborn materials. FAQs: Can these drill bits be used with any SDS drill?No, they are standard drills, will not fit into SDS chuckWhat does jobber mean?The word jobber specifies the length of the drill bit. This generally means the length of the entire drill bit itself is significantly longer for diameter it has. As an example, a mechanic drill bit will have a much shorter flute and therefore have a much smaller overall length.What are HSS and HSS-G?An acronym for High-speed steel, HSS is generally the go-to type of steel needed for drill bits due to their excellent heat resistance at high speeds. The HSS-G drills bits are additionally ground at the tip and along with their flutes. HSS-G drill bits are ideal for high-performance, professional application and are ideal for drilling into an alloy and non-alloy steel, non-ferrous metals, grey cast iron and malleable iron, sintered iron.

Bosch Orbital Sander, Brushed Brushed/Brushless Motor, 18V - 06019L0101 This Bosch GSS 18V-13 is a cordless orbital sander designed for smooth finishes on woodworking projects and other applications. Operating with an 18V battery and featuring a 1.6mm orbit size, this sander is compact and compatible with a 150x100mm sanding pad for efficient material removal. Features & Benefits • Ergonomic Design: Enhances control and reduces user fatigue• Fast Sanding Performance: Brushed motor provides efficient sanding• Variable Speed: No-load orbital speed ranges from 12,000 to 20,000 opm• Versatile: Interchangeable sanding plates for various tasks• Convenient Pad System: Hook-and-loop system enables quick sheet changes Applications • Finishing woodworking projects• Sanding between paint coats• Preparing surfaces for painting• Removing rust and old finishes Is it lightweight for extended use? Yes, it weighs only 1.1kg, making it easy to handle.

Bosch Drill Bit, 105mm Cut Depth, 7.15mm Diameter - 2608900528 This versatile Bosch drill bit is a high-speed steel pilot drill designed for precision drilling. With a diameter of 7.15mm and a cut depth of 105mm, it is suitable for a wide range of materials including steel, plastic, wood, and plasterboard. Features & Benefits • High speed steel construction for durability and long-lasting sharpness• Hexagon shank shape for secure grip and reduced slippage• Total length of 105mm for versatile use in different applications• Power Change Plus design for quick and easy changing between drill bits Applications • Ideal for drilling precise holes in metal pipes and profiles• Suitable for creating holes in plastic materials with ease• Suitable for woodworking tasks that require precision• Great for plasterboard installation projects Will this Bosch drill bit work on steel materials? Yes, the HSS-G pilot drill bit is specifically designed for drilling steel materials with precision. Can it be used for wood drilling? Yes, this pilot drill bit is suitable for wood with metal applications, providing clean and accurate holes. How is the grip on this drill bit? The hexagon shank shape ensures a secure grip, reducing the risk of slippage during drilling tasks.

The Bosch AdvancedAquatak 140 is used for cleaning areas and objects outside the house, tools, vehicles and boats with auto stop function. 0 to 40 degree Celsius ambient temperature79 dB sound pressure level

Bosch Wall Scanner, 60mm Cable Detection Depth, 120mm Metal Detection Depth - 0601081308 This wall scanner by Bosch is an intuitive radar scanner suitable for nearly all materials. With a maximum detection depth of 120 mm, it utilises Bosch radar technology to detect various objects such as magnetic metals and live cables. Features & Benefits • Spot measurement for accurate detection on narrow surfaces• Centre finder for clear identification of an object's centre• Supplied in L-Boxx hard storage box. Applications • Ideal for detecting live cables• Suitable for identifying wooden substructures• Essential for detecting magnetic and non-magnetic metals Can it detect magnetic metals? Yes, the Bosch wall scanner can detect magnetic metals up to a depth of 120 mm. Will it indicate the presence of live cables? Yes, the scanner features a Live AC Conductor Indicator for this purpose. Is it suitable for identifying wooden substructures? Yes, the wall scanner can accurately detect wooden substructures up to a depth of 38mm.

The Bosch tough material hole saw is great all rounder which barely slows down when it hits metal. Extreme durability is built in with Bosch carbide technology. Individually ground teeth made from fine, hard carbide and patent slot design for better view and plug ejection. It has 70 mm diameter and 60 mm working length. Lasts up to 50x longer than a bi-metal hole saw in tough materials

HSS-G Imperial Drill Bits (DIN 338) High Speed Steel imperial sized drill bits suitable for alloyed and non-alloyed steel, cast steel, iron and hard plastics. Precision ground for a faster drilling rate and lower feed pressureSelf centring drill bits

HSS-G Imperial Drill Bits (DIN 338) High Speed Steel imperial sized drill bits suitable for alloyed and non-alloyed steel, cast steel, iron and hard plastics. Precision ground for a faster drilling rate and lower feed pressureSelf centring drill bits

The X-LOCK Backing Pad Soft is ideal for fine grit sanding (P60 and finer). Its flat surface is optimised for fine sanding applications. A heavy-duty pad design makes it enduring and provides an extended pad lifetime. Manufactured from thermostable plastic, it resists high temperatures and breakage. It is suitable for use with X-LOCK angle grinders. Flat surface is optimised for fine sanding applicationsHeavy-duty pad design makes it enduring and provides an extended pad lifetimeResists high temperatures and breakage due to reinforced thermostable plastic material

Bosch HSS-G Metric Jobber Drill Bits (DIN 338) Introducing the series of HSS-G Drill Bits from Bosch. These high-performance drill bits are designed to give a very clean, accurate holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron malleable cast iron, non-ferrous metals and hard plastic. The HSS-G drill bits enable up to 40% faster drilling rates and 50% lower feed pressure than standard HSS bits, with a chisel edge and split point drill tip manufactured to DIN338. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. Features and Benefits: • Features self-centring split-point for excellent positional accuracy and hole quality• 135° point angle design for maximum accuracy of application• No pre-punch or pilot required• Right-hand helical drill bits type N• Precision ground for a faster drilling rate and lower feed pressure• Spiral helix enables rapid swarf removal• Suitable for drilling in alloyed and non-alloyed steel up to tensile strength of 900N/m2• Suitable for both hand and machine use Approvals and Certification: • DIN338 • DIN1412C Quadruple Sharpening• Bosch Standard Quality Typical Applications: These bits are ideal for fast drilling of a plug, anchor or clearance holes in a number of materials such as steel, plastic, wood, metal etc. This makes it an essential piece of kit to have if you work within the carpentry/construction/engineering industries to save time and money on being able to perform more efficiently when working with stubborn materials. FAQs: Can these drill bits be used with any SDS drill?No, they are standard drills, will not fit into SDS chuckWhat does jobber mean?The word jobber specifies the length of the drill bit. This generally means the length of the entire drill bit itself is significantly longer for diameter it has. As an example, a mechanic drill bit will have a much shorter flute and therefore have a much smaller overall length.What are HSS and HSS-G?An acronym for High-speed steel, HSS is generally the go-to type of steel needed for drill bits due to their excellent heat resistance at high speeds. The HSS-G drills bits are additionally ground at the tip and along with their flutes. HSS-G drill bits are ideal for high-performance, professional application and are ideal for drilling into an alloy and non-alloy steel, non-ferrous metals, grey cast iron and malleable iron, sintered iron.

Bosch HSS-Co Cobalt Drill Bits (DIN 338) Introducing the series of HSS-Co (Cobalt) Drill Bits from Bosch. These high-performance drill bits are manufactured from alloyed high-speed steel to DIN 338 with 5% cobalt content making them resistant to heat and wear, making them ideal for use in tough and hard steels. The HSS-Co drill bits enable up to 40% faster drilling rates and 50% lower feed pressure than standard HSS bits, with a chisel edge and split point drill tip manufactured to DIN338. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. These drills are ideal for use with pillar drills and drill stands. Features and Benefits: • Features self-centring split-point for excellent positional accuracy and hole quality• 135° point angle design for maximum accuracy of application• No pre-punch or pilot required• Precision ground for a faster drilling rate and lower feed pressure• Spiral helix enables rapid swarf removal• Suitable for drilling in alloyed and non-alloyed steel up to tensile • strength of 1000N/m2• Suitable for both hand and machine use Approvals & Certification: • DIN338/1414• Bosch Standard Quality Typical Applications: These bits are ideal for fast drilling of a plug, anchor or clearance holes in a number of materials such as steel, plastic, wood, metal etc. This makes it an essential piece of kit to have if you work within the carpentry/construction/engineering industries to save time and money on being able to perform more efficiently when working with stubborn materials. FAQs: Can these drill bits be used with any SDS drill?No, they are standard drills, will not fit into SDS chuckWhat does jobber mean?The word jobber specifies the length of the drill bit. This generally means the length of the entire drill bit itself is significantly longer for diameter it has. As an example, a mechanic drill bit will have a much shorter flute and therefore have a much smaller overall length.What are HSS and HSS-Co?An acronym for High-speed steel, HSS is generally the go-to type of steel needed for drill bits due to their excellent heat resistance at high speeds. The HSS-Co (cobalt) drills bits are manufactured with the addition of 5% cobalt content that increases heat resistance and wears making them ideal for use with tough and hard steels.

The Bosch hard ceramic bit set consist of 5 pieces with 6.0mm diameter. It is designed for drilling ceramics and can drill holes in hard tiles without lubricant or cooling. It start holes accurately with a specially-designed centring tip. Up to 5x more precise than a standard drill bitExtremely durable tip