Soder-Wick® De-soldering Braid De-soldering braid packaged in static dissipative bobbins. Significantly reduces rework/repair timeMinimises the risk of damage to the boardPatented non-corrosive, halide free, organic no-clean fluxBGA desolder braid is designed for removing solder from BGA pads and chips

The Chemtronics foamtip swabs are constructed from medical grade foam which features the best open cell structure, providing excellent particle entrapment characteristics. The foam is thermally bonded to the swab handle without using adhesives. These foam swabs are ideal for general cleaning applications. Highly absorbent precision foam swabPrecision cleaning swabs with polyurethane foam headPurest medical grade foamTraps surface particles while cleaningHigh solvent capacity, holds solvent wellFiberless construction does not generate loose fibers or particlesNo adhesives or binders are used in the constructionEconomical for high quantity applications

The Chemtronics IPA Presaturated Wipes remove solder paste, inks and other contaminants. These highly effective cleaning wipes are ideal for all general cleaning applications. IPA Presaturated Wipes are well suited for touch-up cleaning of automatic printer stencils and cleaning of semi-automatic printer stencils during and at the end of production runs. Plastic Safe Lint free RoHS Compliant Flammable Regular Cleaning Strength California - CARB Electronics Cleaner 75% Compliant

Soder-Wick® De-soldering Braid De-soldering braid packaged in static dissipative bobbins. Significantly reduces rework/repair timeMinimises the risk of damage to the boardPatented non-corrosive, halide free, organic no-clean fluxBGA desolder braid is designed for removing solder from BGA pads and chips

Plast-N-Glas Anti-static Foam Spray Controls static, cleans and polishes in one applicationFoaming spray will not run or dripReduces the attraction of dust, and other airborne contaminantsCompatible with plastics, glass and stainless steelEffectively removes dirt, grease, ink, finger prints and nicotine stainsNot for use on anti-glare coatings or mesh screensCFC/HCFC free

Chemtronics Swab The Chemtronics 113mm Flextips swab is constructed from medical grade 100 PPI, polyurethane foam which features fine cell structure, providing excellent particle entrapment characteristics. This foam is thermally bonded to the nylon paddle and the polypropylene swab handle without using adhesives. This tough nylon paddle is very flexible and virtually unbreakable. This swab is ideal for general cleaning applications. Flex tips are open-cell foam for high absorbency, soil capture and gentle cleaning. Features and Benefits Traps surface particles while cleaningHigh solvent capacity holds solvent well Fibreless construction does not generate loose fibres or particles No adhesives or binders are used in the construction Economical for high-quality applications Applications Clean excess adhesives after gluingClean micro-mechanical devicesMaintain and service Fax machines, VCR's, PC's, printers and copiersRemove Flux residues from printed circuit boardsApply small precise quantities of adhesive or lubricants

Chemtronics Flux-Off Rosin Flux Remover The Chemtronics Flux-Off rosin flux remover formulation is a fast-drying aerosol that quickly and completely removes R, RMA, RA and synthetic flux residue. It has a low surface tension and superior wetting properties, which helps to remove harmful residues in tight tolerance areas. It is compatible with most materials used in the electronics industry. Features and Benefits Penetrates hard to reach areasEvaporates quicklyLeaves no residueRemoves oil, grease, ionic and non-ionic residuesLow odourNon-corrosive formulationContains no CFCs or HCFCs Applications Chip carriersHeat sinksPlugsPrinted circuit boardsRelaysSocketsSurface mount device padsSwitches

Chemtronics CircuitWorks Overcoat Pen The Chemtronics 4.9g CircuitWorks overcoat pen is ideal for protecting and insulating circuit board traces, components, and other delicate electronics. This is a highly effective coating that provides excellent protection against shorts, moisture, abrasion, fungus, and other environmental hazards. This coating allows an insulating circuit board traces, components, and other delicate electronics. It has excellent resistance to water-based cleaners and limited resistance to aggressive organic solvents such as acetone. You can enhance the chemical resistance by heat curing. Features and Benefits Simple to use, single component system Hard, durable coating High dielectric strength Helps prevent arcing and shorts Contains fluorescent indicator Protects against moisture damage Helps prevent static discharge problems on sensitive componentsOperational temperature ranges between -55°C and 125°C• Applications Circuit board manufacturing Data communications Aerospace Instrumentation Controls General maintenance and repair Certifications MIL-I-46058CIPC-A-610D

The G3 is an aerosol with a powerful non-flammable spray and strong solvent that blasts of residues and clean areas under components that a brush cannot touch. The G3 is formulated to be powerful and non-flammable, yet economical. Eliminate brushing, saving time and materials. Powerful cleaner Non-flammable Non-ozone depleting Safe on electronics Rapid evaporation Zero residue Safe on most plastic Excellent material compatibility Typical Applications:PCB’s Electronics assemblies

Lead-free Soder-Wick® Fast, safe, de-soldering braid specifically formulated for use with Lead-free applications More efficient than conventional de-soldering braidsNon-corrosive, ultra high purity no-clean fluxWill not leave ionic contamination on the boardsCan also be used with tin/lead solders

The Coventry ESD static control swabs are used to eliminate damage from static electricity. The handles are made from static dissipative plastic alloy. It dissipates 99% of a 5 KV charge in less than 2.0 seconds. Surface resistivity of 10 EE10 ohms/sqLow ionic, nonvolatile residue, and particulate contaminationNo humidity dependency

The Chemtronics Techspray Isopropyl Alcohol (IPA) Wipes is use as flux removers (defluxers) remove flux residues and other contaminants left by manufacture, rework, or repair of printed circuit boards. It also removes residues from higher, lead free temperatures are more baked on and harder to clean. Techspray flux removers have been proven very effective at removing fluxes baked on at lead free temperatures. 99.8% pure IPA Ideal for electronics cleaning Plastic-safe Low linting & tear resistant