The CIF Tinned Copper Clad Strips,16/10mm has 160 x 200 mm format. Drilled at a pitch of 2.54 mmØ -> drilling 1 mmInterval between tracks 0.54 mmTrack width 2 mm over the entire surfaceMaterial: FR4 epoxy glass

The CIF 1 roll of repositioning adhesive has 2 sides, width 50 mm and length 25 meters. It is two sidedAdhesive

Pre-Sensitised Boards 35μm or 70μm Complies with military standard P 13949F M12 13949F Professional quality boards with blue coloured positive resinFire resistance: UL 94-V0Board material Glass-Epoxy FR4

The CIF EPOXY BASE without resin , 16/10TH - 35 microns of copper has 2 sides and 148 x 210mm size. High qualified stratified8 layers of glass clothMIL 13949 F standardFlammability class UL94V0Moisture absorption Arc resistance 60 secLoss tangent 0.035Thermal conductivity 0.3 W / mk

Dual-arm FILTRATEC-F Suction / Filter Unit Suitable for all electronic cabling applications. Each unit features a dual-layer filter (HEPA + Neutrafil) as standard, 2 speeds and a powerful and very quiet turbine (52 dBA).Spare filters are available separately.

CIF Copper Clad Epoxy Boards High-quality layered untreated copper-plated boards.Eight layers of glass cloth.Graving or touch-up pens are available separately. Product will be packaged in individual protective plastic bags.

Pre-Sensitised Boards 35μm or 70μm Complies with military standard P 13949F M12 13949F Professional quality boards with blue coloured positive resinFire resistance: UL 94-V0Board material Glass-Epoxy FR4

The CIF Tungsten Carbide Drill Bit has Monobloc. Reinforced shank 3.17 (1/8 ") and Dia 0.3mm. It is Particularly recommended for drilling printed circuits. Packaging in box of 10 pieces (more economical) Material used tungsten carbide. In stock from 0.4 mm to 3.00 mmMinimum drilling speed 20,000 rpmThe smaller the diameter of the drill bit, the lower the speed will be. highDescent speed from 1.6 to 4 m / minOption, drill with ring on request

The CIF Copper resist board 1 side,16/10mm, 35 um has 150 x 200 mm format. It has High quality laminate ,8 layers of glass fabric and MIL 13949 F standard. UL94V0 flammability classMoisture absorption Arc resistance 60 secLoss tangent 0.035Thermal conductivity 0.3 W / mk

CIF Carbide Tungsten Drill Bits High grade solid carbide PCB drills with 1/8 inch (3.17 mm) diameter shank, drills remain sharp for much longer than standard steel drills when drilling epoxy glass PCB laminates. A high speed is recomended to produce good quality holes and avoid breakage.

CIF Carbide Tungsten Drill Bits High grade solid carbide PCB drills with 1/8 inch (3.17 mm) diameter shank, drills remain sharp for much longer than standard steel drills when drilling epoxy glass PCB laminates. A high speed is recomended to produce good quality holes and avoid breakage.

CIF Carbide Tungsten Drill Bits High grade solid carbide PCB drills with 1/8 inch (3.17 mm) diameter shank, drills remain sharp for much longer than standard steel drills when drilling epoxy glass PCB laminates. A high speed is recomended to produce good quality holes and avoid breakage.