Cistermiser Electronic Flush Control Valve The Cistermiser flush and flow controller is a robust control valve used to automatically manage the supply of water to a urinal cistern. It has a maximum sensing distance of 4m. it is recessed into a suspended ceiling using the ceiling mounting kit (CMK) that is supplied with the IRC as standard. The unit employs a motion-sensing infrared to control the valve operation and reduce water consumption by over 80%. Features and Benefits A connection is 15mm compression female<BR/>Battery supply is 4 x 1.5V<BR/>Maximum working pressure is 6bar<BR/>Normal or economy mode water-saving options<BR/>Supplied in a white ABS case design to fit directly on to the solenoid<BR/>Supply voltage rating is 230VAC<BR/>Surface-mounted using a standard pattress box<BR/>The battery is alkaline type LR6 and capacity is 2700mAh<BR/>Visible LED status indicator and a low battery alert Certifications WRC approved

Siliphos® Spheres Glass-like polyphosphorate containing sodium, calcium, magnesium and silicate<BR/>For replenishment of Combimate dual-fit scale prevention systems<BR/>Minute concentrations of polyphosphates are sufficient to inhibit the deposition of scale on to metallic surfaces<BR/>Because of its phosphate and silicate content, Siliphos also inhibits corrosion by forming a thin protective layer on the inside of pipes and metal parts<BR/>This film or layer is microscopic in thickness and will not build up over time<BR/>A Siliphos concentration of 2-3ppm is sufficient<BR/>Replenishment pack size 800gm

Valves - Hydraulic WRAS approved hydraulic water management devices that comply with Bylaw 82 and 83<BR/>Standard (STD), low pressure (LP) and high sensitivity low pressure (HSLP) types<BR/>Replace trickle - cock in the supply pipe to the cistern<BR/>Work by detecting slight changes in water pressure caused when washroom facilities are used<BR/>Pass a pre-set amount of water per operation<BR/>Stop filling the cistern when the building is empty

Valves - Hydraulic WRAS approved hydraulic water management devices that comply with Bylaw 82 and 83<BR/>Standard (STD), low pressure (LP) and high sensitivity low pressure (HSLP) types<BR/>Replace trickle - cock in the supply pipe to the cistern<BR/>Work by detecting slight changes in water pressure caused when washroom facilities are used<BR/>Pass a pre-set amount of water per operation<BR/>Stop filling the cistern when the building is empty