The Cleanspace Combined Filter is suitable for protection against airborne particulate dust, mists and fumes, organic, inorganic and acid gases or vapors boiling point greater than 65C. When selecting a Clean Space Filter please consult a Health and Safety specialist for advice on the appropriate respiratory equipment and filter use. Standards = EN 12942 Used with the revolutionary Clean Space PAPR light weight, no hoses or belts<BR/>Materials Fiberglass particulate media, activated carbon and plastic casing, silicone seal<BR/>Easily fitted and removed from the power unit

The Cleanspace Particulate Pre-Filter is suitable for protection against airborne particulates dust, mists and fumes. The Pre-Filter is designed to remove course particles and enhance the life of the Particulate P3 Filter on PAF-0037 and Combined Filters. The Pre-Filter should be changed after each use. When selecting a Clean Space Filter please consult a Health and Safety specialist for advice on the appropriate respiratory equipment and filter use. Standards = AS/NZS1716: 2012, EN 12942 Used with the revolutionary Clean Space a light weight PAPR with no hoses/belts<BR/>Materials Spun polymer fibers<BR/>Easy and quickly fitted and removed from the power unit<BR/>Sold in Pack of 20<BR/>Compatible with all Clean Space Respirators

The Cleanspace EX Half Masks are designed for use with the Clean Space EX Power Unit. The EX Half Masks clip quickly onto the power units and are easily unclipped for cleaning. The Half Masks are made of soft silicone that readily molds to the face and does not cause allergic dermatitis. The Clean Space EX Half Masks have been treated with an electrically conductive coating and have been approved for the use in Intrinsically safe environments. Standards = EN 12942:1998+A2:2008, AS/NZS 1716: 2012, IEC 60079-0:2017, IEC 60079-11:2011, EN600790:2012, EN 60079-11:2012 Light weight, comfortable and durable<BR/>Soft silicone that readily molds to the face<BR/>Available in 3 sizes Small, Medium and Large to facilitate a good seal and a comfortable fit<BR/>Transparent to assist with communication<BR/>Compatible with most cleaning and disinfection protocols<BR/>Easily removable exhalation valve for cleaning<BR/>Fit Test adaptor available for TSI Porta count fit testing

The Cleanspace EX Half Masks are designed for use with the Clean Space EX Power Unit. The EX Half Masks clip quickly onto the power units and are easily unclipped for cleaning. The Half Masks are made of soft silicone that readily molds to the face and does not cause allergic dermatitis. The Clean Space EX Half Masks have been treated with an electrically conductive coating and have been approved for the use in Intrinsically safe environments. Standards = EN 12942:1998+A2:2008, AS/NZS 1716: 2012, IEC 60079-0:2017, IEC 60079-11:2011, EN 60079-0:2012, EN 60079-11:2012 Light weight, comfortable and durable<BR/>Soft silicone that readily molds to the face<BR/>Available in 3 sizes Small, Medium and Large to facilitate a good seal and a comfortable fit<BR/>Transparent to assist with communication<BR/>Compatible with most cleaning and disinfection protocols<BR/>Easily removable exhalation valve for cleaning<BR/>Fit Test adaptor available for TSI Porta count fit testing

The Cleanspace Ultra & EX Head Harness is designed to be used with the Clean Space Ultra or Clean Space EX PAPR Power Units. The Head Harness is made of TPU plastic, neoprene with nylon clips. Standards = AS/NZS1716: 2012, EN 12942 Used with the revolutionary Clean Space PAPR hence light weight and no hoses or belts<BR/>Designed for comfort over long periods<BR/>Allows sweating and breathability<BR/>Multiple adjustment points<BR/>Easy to wash and quick drying<BR/>Durable and designed for long wear in harsh environments<BR/>Easy and quick replacement

The Cleanspace Combined Filter is suitable for protection against airborne particulate dust, mists and fumes, organic, inorganic and acid gases or vapors boiling point greater than 65C. When selecting a Clean Space Filter please consult a Health and Safety specialist for advice on the appropriate respiratory equipment and filter use. Standards = EN 12942 Used with the revolutionary Clean Space PAPR light weight, no hoses or belts<BR/>Materials Fiberglass particulate media, activated carbon and plastic casing, silicone seal<BR/>Easily fitted and removed from the power unit

The Cleanspace Pre-Filter is suitable for use with the Clean Space Standard Particulate Filter for protection against airborne particulate dust, mists and fumes. The Pre-Filter is designed to remove course particles and enhance the life of the Particulate P3 filter. The Pre-Filter should be changed after each use. Standards = AS/NZS1716: 2012, EN 12942 Used with the revolutionary Clean Space A light weight PAPR with no hoses/belts<BR/>Materials Spun polymer fibers<BR/>Easy and quickly fitted and removed from the power unit<BR/>Sold in Pack of 10 pre-filters<BR/>Compatible with all Clean Space Respirators

The Cleanspace Particulate Filter P3 TM3 P SL R is suitable for protection against airborne particulates dust, mists and fumes. The filters are compatible with all Clean Space PAPR Power Units. When selecting a Clean Space Filter please consult a Health and Safety specialist for advice on the appropriate respiratory equipment and filter use. Standards = AS/NZS1716: 2012, EN 12942 Used with the revolutionary Clean Space PAPR light weight, no hoses or belts<BR/>Suitable for protection against airborne particulate dust, mists and fumes<BR/>Materials Fiberglass particulate media and plastic casing, silicone seal<BR/>Easy and quickly fitted and removed from the power unit<BR/>Pack of 3

The Cleanspace e Protective Unit Cover is a disposable cover that protects Clean Space respirators from dirt and splash example water, paint and cement. The Protective Unit Coverall should be changed after each use. When selecting a Clean Space Filter please consult a Health and Safety specialist for advice on the appropriate respiratory equipment and filter use. Standards = EN 12942, EN 12942 (CE Mark), AS/NZS1716: 2012 Used with the revolutionary Clean Space a light weight PAPR with no hoses/belts<BR/>Materials Spun polymer fibers<BR/>Easy and quickly fitted and removed from the power unit<BR/>Compatible with all Clean Space Respirators

The Cleanspace Combined Filter is suitable for protection against airborne particulate dust, mists and fumes, organic gases or vapors boiling point greater than 65C. When selecting a Clean Space Filter please consult a Health and Safety specialist for advice on the appropriate respiratory equipment and filter use. Standards = EN 12942 High Capacity Particulate Filter must be used in conjunction with the Clean Space Filter Adaptor<BR/>Used with the revolutionary Clean Space PAPR light weight, no hoses or belts<BR/>Materials Fiberglass particulate media, activated carbon and plastic casing, silicone seal<BR/>Easily fitted and removed from the power unit

The Cleanspace Combined filter is suitable for protection against airborne particulate dust, mists and fumes, organic gases or vapors boiling point greater than 65C. When selecting a Clean Space Filter please consult a Health and Safety specialist for advice on the appropriate respiratory equipment and filter use. Standards = EN 12942 Combined filter must be used in conjunction with the Clean Space Filter Adaptor<BR/>Used with the revolutionary Clean Space PAPR light weight, no hoses or belts<BR/>Materials Fiberglass particulate media, activated carbon and plastic casing, silicone seal<BR/>Easily fitted and removed from the power unit

The Cleanspace EX Half Masks are designed for use with the Clean Space EX Power Unit. The EX Half Masks clip quickly onto the power units and are easily unclipped for cleaning. The Half Masks are made of soft silicone that readily molds to the face and does not cause allergic dermatitis. The Clean Space EX Half Masks have been treated with an electrically conductive coating and have been approved for the use in Intrinsically safe environments. Standards = EN 12942:1998+A2:2008, AS/NZS 1716: 2012, IEC 60079-0:2017, IEC 60079-11:2011, EN 60079-0:2012, EN 60079-11:2012 Light weight, comfortable and durable<BR/>Soft silicone that readily molds to the face<BR/>Available in 3 sizes Small, Medium and Large to facilitate a good seal and a comfortable fit<BR/>Transparent to assist with communication<BR/>Compatible with most cleaning and disinfection protocols<BR/>Easily removable exhalation valve for cleaning<BR/>Fit Test adaptor available for TSI Porta count fit testing