Workstation Standard WS and Heavy WD Edged Anti-fatigue Mats COBA Workstation mats are an anti-fatigue mat that is made from PVC available as a standard or heavyweight floor mat. The WS and WD mats are complete with a fitted bevel edge helping to prevent trip hazards. The anti-fatigue mats have an open weave cross ribbed design helping to avoid any slips, plus allowing any fluids to drain away from the mats surface. Features and Benefits: Loose lay, workstation mat Anti-fatigue Made from PVC extrusions Cross ribbed lattice surface design Open surface allows drainage for liquid and debris Suitable for wet and dry environments UV Resistant Factory fitted bevelled edges Prevents trip hazards High traffic Slip resistant - tested Fire safety tested Available in a standard or heavyweight Applications: Industrial Machine tool areas Heavy swarf waste (caused by machine tooling) Where pallet trucks and trolleys are used Wet and dry areas Chemical Resistant To? Chemicals Alkalis General industrial chemicals Alcohols Aliphatic hydrocarbons Oil Grease (must be correctly cleaned) Weak acid Strong mineral acids Standard Resistance? UV Slip protection EN 13552 category R10 Flame resistant DIN 54332(B2) – part of DIN 4102 How to Clean? Hot soapy water Pressure wash clean Standard Anti-fatigue Mats Avaialable: Stock number 862397 – WS010701 – weight 3.3 kg Stock number 862404 – WS010702 – weight 6.7 kg Stock number 862410 – WS010703 – weight 9.6 kg Heavy Anti-fatigue Mats Available: Stock number 862426 – WD010701 – weight 4.4 kg Stock number 862448 – WD010703 – weight 8.85 kg Stock number 862432 - WD010702 – weight 13.15 kg

Workstation Standard WS and Heavy WD Edged Anti-fatigue Mats COBA Workstation mats are an anti-fatigue mat that is made from PVC available as a standard or heavyweight floor mat. The WS and WD mats are complete with a fitted bevel edge helping to prevent trip hazards. The anti-fatigue mats have an open weave cross ribbed design helping to avoid any slips, plus allowing any fluids to drain away from the mats surface. Features and Benefits: Loose lay, workstation mat Anti-fatigue Made from PVC extrusions Cross ribbed lattice surface design Open surface allows drainage for liquid and debris Suitable for wet and dry environments UV Resistant Factory fitted bevelled edges Prevents trip hazards High traffic Slip resistant - tested Fire safety tested Available in a standard or heavyweight Applications: Industrial Machine tool areas Heavy swarf waste (caused by machine tooling) Where pallet trucks and trolleys are used Wet and dry areas Chemical Resistant To? Chemicals Alkalis General industrial chemicals Alcohols Aliphatic hydrocarbons Oil Grease (must be correctly cleaned) Weak acid Strong mineral acids Standard Resistance? UV Slip protection EN 13552 category R10 Flame resistant DIN 54332(B2) – part of DIN 4102 How to Clean? Hot soapy water Pressure wash clean Standard Anti-fatigue Mats Avaialable: Stock number 862397 – WS010701 – weight 3.3 kg Stock number 862404 – WS010702 – weight 6.7 kg Stock number 862410 – WS010703 – weight 9.6 kg Heavy Anti-fatigue Mats Available: Stock number 862426 – WD010701 – weight 4.4 kg Stock number 862448 – WD010703 – weight 8.85 kg Stock number 862432 - WD010702 – weight 13.15 kg

Safety Deckplate Floor Matting Deckplate is a durable, loose lay, anti-fatigue flooring with a comfortable foam cushion backing complete with a yellow hazard border. The anti-fatigue Deckplate mat is hard-wearing PVC with a soil resistant diamond pattern surface and ramped edges. Suitable for dry environments the self-extinguishing surface is resilient to most industrial chemicals. Features and Benefits: Deckplate flooring mat Loose lay Diamond pattern surface Ramped edges Yellow hazard border Anti-fatigue Slip resistant Made from Vinyl topped with a PVC foam backing, fusion bonded Suitable for dry environments Pile height 14 mm Temperature range 0°C to 60°C Hard wearing Soil resistant Self-extinguishing Comfortable to stand on for long periods Matting main colour is black Easy to clean Applications: Dry areas Packing stations Assembly areas Production lines Weight: Stock number 4181125 – SD010702 – 8.86 kg Stock number 4181131 – SD010703 – 17.71 kg Chemical Resistant To? Limited resistance to chemicals and oils How to Clean? Brush Mop top surface

Fingertip Natural Rubber Door Mats Fingertip is a high-quality natural rubber door mat made from NBR (Nitrile rubber) designed for outdoor use but is also suitable for indoor use. The door mat protects your floor surface as the natural rubber nodules provide amazing dirt scraping, trapping dirt and debris. The mat works by brushing off the dirt from footwear and then keeping it within the solid base of the mat. The slip resistance of the door mat ensures it stays in place plus it has added safety features with bevelled edges surrounding the mat. Features and Benefits: High traffic Outdoor use (can be used indoors) Excellent in all weather conditions Durable Scrape action Traps in dirt and debris Loose lay, drop down Stays in place Slip resistant base Safety bevelled edges UV Resistant Easy to clean Various sizes available What is the Door Mat Manufactured From? NBR – Nitrile rubber Rubber nodules Safety bevelled edges UV Resistant Where Can I Use the Door Mat? External use Can be used indoors Use as a drop-down mat Install on any surface Doorways Entrances Hallways Door Mat Dimensions? Height 13 mm Weight 10 Kg/m² Temperature range -20°C to +160°C Cleaning? Wet/Dry Vacuum Wash down with a hose

COBAstat® ESD Mat Comfortable anti-static mat for dry environments Features and Benefits Comfortable and durable floor mat protects operatives from static build-up.ESD version of our popular Orthomat® anti-fatigue range.Grounded via a 10 mm male stud fitted to the mat.Maximum performance when used with grounding wire.Available as a handy COBAstat® Floor Kit with accessories provided.Tested to EN14041 resistance requirements.Rv: 1.1 x 10⁷ Ω Applications Around machinery where static build up is common Can I use this ESD-safe mat on my workbench? Yes, it's a versatile product that's also suitable for work surfaces where you need to eliminate ESD risks.

Entra-Plush Standard Entrance Door Mat Entra-Plush is a high-quality crush-resistant carpet door mat made from 100% polypropylene designed for indoor use. The door mat protects your floor surface as the floor mat fibres scrape and trap debris and dirt from footwear. The slip and stain resistant PVC backing ensures the Entra-Plush door mat stays in place. An excellent everyday entrance mat for wiping moisture form footwear. Features and Benefits: High traffic Indoor use Cutpile surface Crush resistant Durable Scrape action Loose lay, drop down Stays in place UV Resistant Easy to clean Various sizes and colours available What is the Door Mat Manufactured From? 100% Polypropylene 2950 Denier continuous filament solution dyed yarn PVC Backing and border – non-staining Cutpile surface UV Resistant Where Can I Use the Door Mat? Internal use Use as a drop-down mat Install on any surface Doorways Entrances Lobbies Hallways Door Mat Dimensions? Height 7 mm Weight 2.7 Kg/m² Cleaning? Vacuum top surface Absorption? 5.4 Litres per square meter Flame Resistance? DOC-FF-1-70

Workstation Standard WS and Heavy WD Edged Anti-fatigue Mats COBA Workstation mats are an anti-fatigue mat that is made from PVC available as a standard or heavyweight floor mat. The WS and WD mats are complete with a fitted bevel edge helping to prevent trip hazards. The anti-fatigue mats have an open weave cross ribbed design helping to avoid any slips, plus allowing any fluids to drain away from the mats surface. Features and Benefits: Loose lay, workstation mat Anti-fatigue Made from PVC extrusions Cross ribbed lattice surface design Open surface allows drainage for liquid and debris Suitable for wet and dry environments UV Resistant Factory fitted bevelled edges Prevents trip hazards High traffic Slip resistant - tested Fire safety tested Available in a standard or heavyweight Applications: Industrial Machine tool areas Heavy swarf waste (caused by machine tooling) Where pallet trucks and trolleys are used Wet and dry areas Chemical Resistant To? Chemicals Alkalis General industrial chemicals Alcohols Aliphatic hydrocarbons Oil Grease (must be correctly cleaned) Weak acid Strong mineral acids Standard Resistance? UV Slip protection EN 13552 category R10 Flame resistant DIN 54332(B2) – part of DIN 4102 How to Clean? Hot soapy water Pressure wash clean Standard Anti-fatigue Mats Avaialable: Stock number 862397 – WS010701 – weight 3.3 kg Stock number 862404 – WS010702 – weight 6.7 kg Stock number 862410 – WS010703 – weight 9.6 kg Heavy Anti-fatigue Mats Available: Stock number 862426 – WD010701 – weight 4.4 kg Stock number 862448 – WD010703 – weight 8.85 kg Stock number 862432 - WD010702 – weight 13.15 kg

COBArib Fine - Standard Fluted Rubber Runner Matting COBArib anti-slip is a fluted fine ribbed rubber mat with anti-fatigue properties. The anti-fatigue floor mats are excellent for high traffic use plus are adaptable for dry or wet areas. A loose lay anti-fatigue matting, easy to clean, that can also be used as a covering for work benches. The COBArib anti-slip mat protects from cold floors plus also has some noise insulation. A versatile durable, anti-fatigue rubber mat that protects from long periods of standing and slip hazards. Features and Benefits: Loose lay floor mat Fine ribbed, fluted Can be used as a cover for work benches Anti-fatigue Slip resistant Made from natural rubber Durable, hard wearing Suitable for wet and dry environments Some noise insulation High traffic Colour black Pile height 3 mm or 9 mm Temperature range -20°C to +80°C Insulated against cold floor surfaces Easy to clean Applications: Wet or Dry areas Industrial Work bench areas Work stations Walkways Covering for work benches Chemical Resistant To? Most mild acids Water How to Clean? Brushing Hose down Pressure wash Use mild detergents Black Anti-fatigue Mats: Stock number 4181074 – RR010020 – weight 34 kg, mat height 3 mm Stock number 4181068 – RR010010 – weight 26 kg, mat height 3 mm Stock number 4181096 – RR010030 – weight 63.8 kg, mat height 6 mm Stock number 4181103 – RR010040 – weight 85.2 kg, mat height 6 mm

Electrical Insulation Safety Matting Switchboard mattingProvides safety for operatives against electrical shocksFor use in front of switchboards and high voltage equipmentSlip-resistant fine fluted surfaceMade from extremely hard wearing rubberTested to 15 kV rms

Orthomat Standard Anti-fatigue Mats Orthomat is an anti-fatigue mat, made from PVC foam available as a standard anti-fatigue floor mat with a pebble textured surface. The anti-fatigue floor mats are excellent for light to medium use and for dry indoor use. A loose lay anti-fatigue matting, easy to clean, with a tread height of 9 mm. Features and Benefits: Loose lay floor mat Anti-fatigue - Orthomat Made from Virgin closed cell PVC Foam Suitable for dry indoor environments Low to medium traffic Slip resistant - tested Fire safety tested 2 colour options available Pebble textured surface Pile height 9 mm Temperature range 0°C to +60°C Insulated against cold floor surfaces Easy to clean Applications: Dry areas Production lines Assembly areas Packing stations Work bench areas Chemical Resistant To? Chemicals Alkalis General industrial chemicals Alcohols Aliphatic hydrocarbons Oil Grease (must be correctly cleaned) Weak acid Strong mineral acids Does Not Resist: Organic solvents Ketones Esters Aromatic hydrocarbons Standard Resistance? Slip protection EN 13552 category R10 Flame resistant DIN 54332(B2) – part of DIN 4102 How to Clean? Brushing Wet mopping Grey Anti-fatigue Mats: Stock number 1858412 - AF060003 – weight 40 kg Stock number 1858434 - AF060002 – weight 3.27 kg Stock number 1934566 – AF060001 - weight 1.34 kg Black Anti-fatigue Mats: Stock number 1934544 – AF010001 – weight 1.31 kg Stock number 1935913 – AF010003 – weight 40 kg Stock number 1935929 - AF010002 – weight 3.27 kg

Workstation Standard WS and Heavy WD Edged Anti-fatigue Mats COBA Workstation mats are an anti-fatigue mat that is made from PVC available as a standard or heavyweight floor mat. The WS and WD mats are complete with a fitted bevel edge helping to prevent trip hazards. The anti-fatigue mats have an open weave cross ribbed design helping to avoid any slips, plus allowing any fluids to drain away from the mats surface. Features and Benefits: Loose lay, workstation mat Anti-fatigue Made from PVC extrusions Cross ribbed lattice surface design Open surface allows drainage for liquid and debris Suitable for wet and dry environments UV Resistant Factory fitted bevelled edges Prevents trip hazards High traffic Slip resistant - tested Fire safety tested Available in a standard or heavyweight Applications: Industrial Machine tool areas Heavy swarf waste (caused by machine tooling) Where pallet trucks and trolleys are used Wet and dry areas Chemical Resistant To? Chemicals Alkalis General industrial chemicals Alcohols Aliphatic hydrocarbons Oil Grease (must be correctly cleaned) Weak acid Strong mineral acids Standard Resistance? UV Slip protection EN 13552 category R10 Flame resistant DIN 54332(B2) – part of DIN 4102 How to Clean? Hot soapy water Pressure wash clean Standard Anti-fatigue Mats Avaialable: Stock number 862397 – WS010701 – weight 3.3 kg Stock number 862404 – WS010702 – weight 6.7 kg Stock number 862410 – WS010703 – weight 9.6 kg Heavy Anti-fatigue Mats Available: Stock number 862426 – WD010701 – weight 4.4 kg Stock number 862448 – WD010703 – weight 8.85 kg Stock number 862432 - WD010702 – weight 13.15 kg

Work-Safe Multi-Functional Anti-Fatigue Floor Mat Worksafe is a multi-functional anti-fatigue mat plus is also anti-slip made from a blend of SBR rubber and nitrile. The anti-fatigue mate is complete with an open textured surface to allow fluids. Oils and grease to drain away easily. A hard-wearing safety mat that is comfortable when standing for long periods and the ant-slip underneath keeps the mat in position. A moulded bevelled edge completes the anti-fatigue mat and reduces trip hazards. Features and Benefits: Worksafe floor mat Loose lay Open holes, textured surface – 22 mm holes Moulded bevelled edge safety border Anti-fatigue Slip resistant Made from SBR rubber and nitrile Suitable for dry and wet environments Pile height 12 mm Temperature range-20°C to +160°C Hard wearing Comfortable to stand on for long periods Mat colour is black Easy to clean Excellent drainage – debris falls through holes in surface Silicone residue can be left on the mat Applications: Dry and wet areas Workbenches Work stations Machine tooling bays Welding bays Weight: 1.31 kg Chemical Resistant To? Water Mild Acids Oil How to Clean? Pressure hose Use mild detergent