CTEK Lead Acid Charger The CTEK MXS 3.8 series lead-acid battery charger is an advanced microprocessor-controlled device with patented float/pulse maintenance for use on batteries from 1.2Ah up to 80Ah. This charger solves a broad range of battery problems and is ideal for everyday use. Its features include diagnosis of battery condition to establish if it can receive and retain a charge, patented automatic desulphation program and a special "snowflake" model for optimum charging on cold winter days. The entire process of battery testing, charging and maintenance is easily followed on the clear LED display. It has a "snowflake" model that operates on the 3.8A program and it is splash-proof and dustproof. This charger is easy and safe to use also, protects vehicle electronics, is spark-free, reverse polarity protected and short circuit proof. This battery charger has an output voltage of 12V and charging current of 3.8A. Features and Benefits The supply voltage is between 220VAC and 240VAC<BR/>Minimum battery voltage is 2.0V<BR/>Comfort connect compatible is possible<BR/>Current, mains is 5amps RMS (at full charge current)<BR/>Back current drain is less than1Ah/month<BR/>Ambient temperature ranges between -20ﾟC and 50ﾟC <BR/>Output power is reduced automatically at high-temperature<BR/>Charger type is 7 stage, fully automatic charge cycle<BR/>Battery types is all types of 12V lead-acid batteries (wet, MF, GEL, Ca/Ca and AGM)<BR/>Battery capacity ranges between 1.2A per hour and 80A per hour Certifications IP65 rated

<B>CTEK MX10 Battery Charger designed for charging 12V lead-acid batteries</B> The MXS 10 is a charger that offers state of the art technology. It is ideal for professional use and excellent in workshops, caravans, RVs, boats or cars. The MXS 10 is perfect for solving a broad range of battery problems. It offers features such as battery diagnosis thatshows if a battery can receive and retain a charge, a special reconditioning function that restores stratified and deeply discharged batteries, unique maintenance charging and a temperature sensor for optimised charging regardless of the weather conditions. It also has a power supply mode which allows the battery to be disconnected from the vehicle without losing important configurations. The unique display allows the user to follow the entire charging process. The MXS 10 is a fully automatic 8-step charger that delivers 10A to 12 V batteries from 20–200 Ah and is suitable for maintenance charging up to 300 Ah. The charger is IP65 classified (splash and dust proof), designed to protect vehicle electronics, non-sparking, reverse polarity protected, and short-circuit proof. It is delivered with a 2-year warranty. <B>Features and Benefits</B> <ul><li>The supply voltage is between 220VAC and 240VAC </li><BR/><li>Ambient temperature is between -20ﾟC and 50ﾟC </li><BR/><li>Output power is reduced automatically at higher temperatures</li><BR/><li>Charger type is eight step, fully automatic charging cycle</li><BR/><li>Battery capacity ranges from 20A hour and 200A hour</li></ul> <ul><li>Fully automatic for optimal charging</li><BR/><li>Temperature sensor</li><BR/><li>AGM- For charging in cold conditions and AGM</li><BR/><li>batteries</li><BR/><li>Recondition of deeply discharged batteries</li><BR/><li>Use the charger as a power supply</li></ul> <ul><li>12V for all Lead Acid batteries</li></ul> <B>Certifications</B> IP65 rated

CTEK Battery Charger The CTEK MXS 7.0 universal lead acid battery charger is ideal for charging larger batteries such as caravan, motorhome, boat and car batteries. These types of vehicles often demand features that can solve a broad range of battery-related problems. It offers features such as battery diagnosis, which shows whether a battery can receive and retain a charge, a special reconditioning function which restores stratified and deeply discharged batteries, unique maintenance charging, a mode for optimised charging during cold winter days and the charging of demanding AGM batteries. This battery charger has an output voltage of 12V and charging current of 7A.<BR/>Note:<BR/>This charger is IP65 classified (splash and dustproof), designed to protect vehicle electronics, non-sparking, reverse polarity protected and short-circuit proof. The MXS 7.0 has a 5-year manufacturer's warranty Features and Benefits The supply voltage is between 220VAC and 240VAC<BR/>Minimum battery voltage is 2.0V<BR/>Ambient temperature ranging between -20ﾟC and 50ﾟC <BR/>Output power is reduced automatically at high-temperature<BR/>8-step fully automatic charging cycle<BR/>Suitable for all the 12V lead-acid batteries (WET, MF, Ca/Ca, AGM and GEL) Certifications IP65 rated

<B>CTEK XS 0.8 Battery charger new generation charging for smaller batteries</B> The CTEK XS 800 series lead-acid battery charger with pulse maintenance charges and conditions your 12V battery quickly, easily and safely. It constantly monitors the battery after it has been initially charged and only 'trickle charges' the battery when the voltage drops due to alarms or natural drainage. This charger eliminates the danger of overcharging and allows it to be safely connected for months at a time, This is ideal for charging 12 V batteries from 1.2 A hour to 32 A hour. Also, it is suitable for maintaining the batteries of cars, motorcycles and other vehicles up to 100A hour. This battery charger has an output voltage of 12V and charging current of 800mA. <BR/> <BR/>Note:<BR/>If the power connection is the flat European contact type, the battery charger has insulation class IP63, except in Switzerland where IP65 is valid. <B>Features and Benefits</B> <ul><li>The supply voltage is between 220VAC and 240VACAmbient temperature ranges between -20ﾟC and 50ﾟC </li><BR/><li>Output power is reduced automatically at higher temperatures</li><BR/><li>Charger type is eight step, fully automatic charging cycle</li><BR/><li>Battery capacity ranges between 20A hour and 200A hour</li><BR/><li>Charge current is 800mA</li><BR/><li>Input voltage ranges between 220VAC and 240VAC</li></ul> <ul><li>Fully automatic for optimal charging</li></ul> <ul><li>12V for all lead-acid batteries</li></ul> <ul><li>Fully automatic charging and maintenance in 6 steps maximizes battery life and performance</li><BR/><li>Numerous accessories simplify using the same charger for multiple batteries</li><BR/><li>Water-resistant so that the solution could be taken to the problem even if it rains or snows</li><BR/><li>Patented maintenance charge for a unique combination of maximized life and performance</li><BR/><li>Patented desulphation that extends the battery lifeNo sparks, short-circuit proof and reverse-polarity protected for</li><BR/><li>untroubled</li><BR/><li> usage</li></ul> <B>Supplied with:</B><BR/>1 battery lead with a battery clip and 1 battery lead with a ring cable lug <B>Certifications</B> IP63 rated<BR/>IP65 rated in Switzerland

The CTEK MXT 14 is a professional 24V charger which is developed for commercial vehicles where the batteries are put under considerable strain and is ideal for busses, trucks and CV workshops. It has features such as battery diagnosis that shows if a battery can receive and retain a charge. Fully automatic for optimal charging<BR/>For all lead-acid batteries<BR/>Fully charged battery<BR/>Maintenance charging<BR/>For charging in cold conditions<BR/>Recondition of deeply discharged batteries<BR/>Use the charger as a power supply

The CTEK CT5 TIME TO GO battery charger and maintainer allows to stay in control and plan the day by accurately predicting remaining charging time. It has a series of LED lights indicate the different charging stages and how long it will take before the battery is charged and ready to go. Charging steps are try ,go and care <BR/>Ambient temperature -20°C to +50°C<BR/>Battery capacity 20–160Ah

The CTEK CT5 TIME TO GO battery charger and maintainer allows to stay in control and plan the day by accurately predicting remaining charging time. It has a series of LED lights indicate the different charging stages and how long it will take before the battery is charged and ready to go. Charging steps are try ,go and care <BR/>Ambient temperature -20°C to +50°C<BR/>Battery capacity 20–160Ah

The CTEK MXS 5.0 is an advanced microprocessor controlled battery charger featured with automatic temperature compensation built in providing unrivalled performance on lead-acid batteries from 1.2Ah up to 110Ah. Wide charging range<BR/>Option for charging AGM and Stop-Start batteries<BR/>Option for reconditioning deeply discharged batteries

The CTEK The PRO25S is an innovative,versatile and highly efficient 25A battery charger and power supply, designed for the use with automotive professional. It is combination of power & advanced technology with safety, portability and flexibility to work with any 12V vehicle battery. Fully automatic and easy to use<BR/>Simple to connect, spark proof and reverse-polarity protected<BR/>Integrated safety features, so it&#146;s safe for the battery & the vehicle<BR/>Built-in temperature sensor to achieve maximum charge levels

The CTEK CT5 POWERSPORT battery charger featured with dedicated programs for lead-acid and lithium batteries.It gives the best performance of powersport vehicle batteries whether it is on land, water, snow or ice. Suitable for all motorcycles, ATVs, Jet Skis and snowmobiles<BR/>Normal mode, optimized for all lead-acid batteries, including AGM<BR/>Recond mode for reconditioning deeply discharged batteries<BR/>Fully automatic charging including maintenance stage

The CTEK MXS 5.0 TEST & CHARGE is an advanced micro-processor controlled battery charger with a battery and alternator test function to provide the ultimate in battery testing, charging and maintenance. Excellent battery performance<BR/>Option for charging in cold conditions and AGM batteries<BR/>Option recondition of deeply discharged batteries

The PRO25S is an innovative, versatile and highly efficient 25A battery charger and power supply,designed around the needs of the automotive<BR/>professional. Combining power & advanced technologywith safety,portability and flexibility to work with any 12V vehicle battery including lithium*, the PRO25S is the perfect solution to professional battery charging, in the workshop or the showroom. Ideal for everyday proffesional use.Advanced technology will ensure that a safe, fast charge is delivered to exactly meet the needs of the<BR/>individual battery. The PRO25S has a dedicated lead acid battery reconditioning programme to restore battery life & recondition flat batteries. The supply mode will support the battery during diagnostic or fault finding work. It has low voltage & current ripple, so it&#146;s safe for the battery & the vehicle&#146;s delicate electronic systems. Fully automatic & easy to use, it&#146;s also very simple to connect, spark proof and reverse-polarity protected to protect the user & also the battery. The<BR/>PRO25S is designed to ensure easy handling in both the workshop & the showroom. Whilst it&#146;s lightweight & portable, the rugged, impact-resistant casing means it can also handle the toughest workshop environment. <B>Features and Benefits</B> • Dedicated lithium* mode<BR/>• Compatible with batteries from 40Ah to 500Ah (30Ah to<BR/>450Ah lithium*).<BR/>• SUPPLY mode to support the battery during diagnostic or<BR/>fault-finding work.<BR/>• Fully automatic and easy to use. Simple to connect, spark<BR/>proof and reverse-polarity protected.<BR/>• Integrated safety features, so it&#146;s safe for the battery & the<BR/>vehicle.<BR/>• Built-in temperature sensor to achieve maximum charge<BR/>levels<BR/>• Dedicated lead-acid reconditioning programme to restore<BR/>battery life and recondition flat batteries.<BR/>• IP44 classified for outdoor use<BR/>• Lightweight & highly portable<BR/>• Tough & robust <B>Technical Information:</B> Input:220–240VAC, 50–60Hz, 2.9A max Output:14.4V/15.8V/13.6V, 25A max, lead-acid battery types.<BR/>13.8V/14.4V/13.3V, 25A max, LiFePO4. Battery Types:12V: WET, EFB, Ca/Ca, MF, AGM, GEL, LiFePO4 Battery Capacity:40–500Ah, lead-acid battery types.<BR/>30–450Ah, LiFePO4. Insulation Class:IP44 Charger Cable Length:2000 mm (DC cable) Mains Cable Length:1900 mm (AC cable)