Protective lens to fit indicator base Polycarbonate stovepipe lens capSupplied with O-ring to enhance water sealing capabilitiesScrew thread fitting to indicator base

BA9s LED Lamps A professional range of BA9 LED lamps from Dialight. BA9s based LEDOperating current 15mA at 14V, 7.5mA at 28VDomed cap construction to protect LED from damageEasier handling with dome construction, for installation and replacementNon-polarised and polarised versions availableDesigned to replace many popular incandescent lampsColoured caps to signify LED colourTop and side viewableSuper bright single chip designAllnGaP and InGaN technologyHigh brightness and low current draw – uses up to 90% less energy than an incandescentLong life – typically 100k hoursNo heat generatedResistant from shock and vibrationIntegral resistorOperating temperature -40°C to +100°C

17.5mm panel mount indicator/base Designed to accept either LED or incandescent BA9s bulbsRecognised under the component program of ULSupplied with O-ring to enhance water sealing capabilitiesNickel plated brass bodyElectrical connections via solder tagsOperating voltage 6 to 120Vac/dc (dependent on chosen bulb voltage)

BA9s LED Lamps A professional range of BA9 LED lamps from Dialight. BA9s based LEDOperating current 15mA at 14V, 7.5mA at 28VDomed cap construction to protect LED from damageEasier handling with dome construction, for installation and replacementNon-polarised and polarised versions availableDesigned to replace many popular incandescent lampsColoured caps to signify LED colourTop and side viewableSuper bright single chip designAllnGaP and InGaN technologyHigh brightness and low current draw – uses up to 90% less energy than an incandescentLong life – typically 100k hoursNo heat generatedResistant from shock and vibrationIntegral resistorOperating temperature -40°C to +100°C

BA9s LED Lamps A professional range of BA9 LED lamps from Dialight. BA9s based LEDOperating current 15mA at 14V, 7.5mA at 28VDomed cap construction to protect LED from damageEasier handling with dome construction, for installation and replacementNon-polarised and polarised versions availableDesigned to replace many popular incandescent lampsColoured caps to signify LED colourTop and side viewableSuper bright single chip designAllnGaP and InGaN technologyHigh brightness and low current draw – uses up to 90% less energy than an incandescentLong life – typically 100k hoursNo heat generatedResistant from shock and vibrationIntegral resistorOperating temperature -40°C to +100°C

Dialight 550-3x05 Series LED CBI® Circuit Board Indicators The 550-3x05 series, from Dialight, are 5mm CBI (Circuit Board Indicator) LEDs. They are in 3-leaded packages with common cathode. Their black housing provides a high contrast. These bi-colour LED indicators are available in a choice of colours with red/green LEDs providing yellow/orange as a third colour. Features of the 550-3x05 series:- 3-leaded black package- 5mm bi-colour LEDs- Non-tinted, diffused LEDs- Colours: Red/Green and Yellow/Green- Operating temperature: -20 to +85 °C- Viewing angle: 60°

BA9s LED Lamps A professional range of BA9 LED lamps from Dialight. BA9s based LEDOperating current 15mA at 14V, 7.5mA at 28VDomed cap construction to protect LED from damageEasier handling with dome construction, for installation and replacementNon-polarised and polarised versions availableDesigned to replace many popular incandescent lampsColoured caps to signify LED colourTop and side viewableSuper bright single chip designAllnGaP and InGaN technologyHigh brightness and low current draw – uses up to 90% less energy than an incandescentLong life – typically 100k hoursNo heat generatedResistant from shock and vibrationIntegral resistorOperating temperature -40°C to +100°C

Protective lens to fit indicator base Polycarbonate stovepipe lens capSupplied with O-ring to enhance water sealing capabilitiesScrew thread fitting to indicator base

BA9s LED Lamps A professional range of BA9 LED lamps from Dialight. BA9s based LEDOperating current 15mA at 14V, 7.5mA at 28VDomed cap construction to protect LED from damageEasier handling with dome construction, for installation and replacementNon-polarised and polarised versions availableDesigned to replace many popular incandescent lampsColoured caps to signify LED colourTop and side viewableSuper bright single chip designAllnGaP and InGaN technologyHigh brightness and low current draw – uses up to 90% less energy than an incandescentLong life – typically 100k hoursNo heat generatedResistant from shock and vibrationIntegral resistorOperating temperature -40°C to +100°C

BA9s LED Lamps A professional range of BA9 LED lamps from Dialight. BA9s based LEDOperating current 15mA at 14V, 7.5mA at 28VDomed cap construction to protect LED from damageEasier handling with dome construction, for installation and replacementNon-polarised and polarised versions availableDesigned to replace many popular incandescent lampsColoured caps to signify LED colourTop and side viewableSuper bright single chip designAllnGaP and InGaN technologyHigh brightness and low current draw – uses up to 90% less energy than an incandescentLong life – typically 100k hoursNo heat generatedResistant from shock and vibrationIntegral resistorOperating temperature -40°C to +100°C

Dialight 557 Series Panel Mount LED Indicator The 557 Series LED Panel Mount Indicators incorporate both InGaN and AlInGaP technologies to offer higher intensities. Designed to withstand outdoor applications susceptible to rain, dust and sunlight. Available in red, yellow, green, blue and white Watertight seal from front of panel meets MIL-L-3661B Voltage range of 5, 12 & 24 VDCMaximum mounting torque: -15" / lbHousing material: White polycarbonateFront mounting in 11/16" clearance hole Lens material: Polycarbonate 94 - VO Operating temperature: -25°C → +85°C Storage temperature: -30°C → +100°C