Digitron DGS-10 handheld Gas Leak Detector The Digitron AGM50, also known as the DGS-10, is a handheld gas leak detector designed to identify leaks of flammable gases including methane, propane, natural gas and butane. The AGM50 is ideal for HVAC engineers who need to pinpoint gas leaks in both residential and commercial settings. The Digitron Gas Sniffers are highly sensitive which makes them most sought after solution in hazardous atmospheres for sensing gasses like methane etc. Digitron DGS-10's key features: High Sensitivity - it boasts a sensitivity of just 10ppm for methane, allowing it to detect even minor leaks.Fast Warm-up - ready to use within a minute of turning it on.Intuitive Alarms - features both audible and visual alarms that increase in intensity as the concentration of the flammable gas rises. This helps you locate the leak source more precisely.Adjustable Sensitivity - the alarm sensitivity can be adjusted for situations where the gas concentration is too high for accurate tracking.Flexible Goose neck - the gas sensor is located at the end of a 400mm long, flexible goose neck. This allows you to easily reach into tight spaces and around obstacles to pinpoint leaks.Built-in LED torch that illuminates the target area, making it easier to see in poorly lit environments.The sensor head is protected by a sturdy rubber boot for added durability in demanding work environments.Certified for use in flammable or explosive atmospheres

Digitron 2021P, 0-130mbar, Differential Manometer The Digitron 2021P handheld differential manometer is for general purpose applications, testing gas distribution systems, process control systems and leak testing. It is of robust design, to IP67 with hose connected, and operates between -10 and +50 °C. Features include a backlit display, reinforced silicone keypad and separate battery compartment. The 2021P filters low-level fluctuations to provide a stable display when measuring unsteady pressure levels. Accuracy 0.15% rdg + 0.1fs + digit (+20 to +30 °C), 0.15% rdg + 0.15% fs digit (elsewhere)2 inputs via 1/8 BSP (4mm id, 6mm od hose)Preset engineering units -mbar, Pa, inH2O, mH2O, inHg, mHg, kPa, PSIMin/Max recorder and range lockDimensions 155 x 67 x 40 mmWeight 180g

Digitron 2023P, 0-7 bar, Differential Manometer The Digitron 2023P handheld differential manometer takes pressure measurements over a wide range of pressures. It is of robust design, to IP67 with hose connected, and operates between -10 and +50 °C. Features include a backlit display, reinforced silicone keypad and separate battery compartment. The 2023P filters low-level fluctuations to provide a stable display when measuring unsteady pressure levels. Accuracy 0.15% rdg + 0.1fs + digit (+20 to +30 °C), 0.15% rdg + 0.15% fs digit (elsewhere)2 inputs via 1/8 BSP (4mm id, 6mm od hose)Preset engineering units -mbar, Pa, inH2O, mH2O, inHg, mHg, kPa, PSIMin/Max recorder and range lockDimensions 155 x 67 x 40 mmWeight 180g

2028P and 2088P 0-1bar Differential Manometers The 2000 Series of pressure instruments offer a wide range of hand held manometers. Easy to operate, reliable and built to last, the 2000 series has been developed to meet the performance and cost demands of today’s markets.The 2000 series offers the widest range of hand held manometers world-wide. New innovative functions designed to make the operator’s job easier set new standards in pressure measurements. Feature and Benefits Pressure ranges from 1 mbar to 10 bar (0.40218 inH2O to 4021.8 inH2O)Pressure range configurable from 10bar to 500bar with an external transducer (2024P & 2084P only)Logging and leak testingAutoranging displays for precise readingsSelectable auto switch-off 2-year warrantyOverrange protection IP67 (1 m depth for 30 mins) BSI Cert229/000132 Negative and positive reading Applications The range of 2000P instruments are suitable or gauge, differential or absolute measurements over a wide range of pressures. They are not suitable for use with corrosive substances or cyclic hydrocarbons, for example, motor oil, transmission fluid and Freon.To use the 2000P with these components, isolation must be provided in the form of a buffer, such as a mineral oil or dry air.

TM-22 Industrial Thermometer The TM-22 is a low cost Differential Digital Thermometer specifically designed for HVAC professionals and complements Digitron's PM Series range of pressure instruments. Manufactured from tough ABS plastic, this water-resistant instrument is supplied with a rubber boot to provide added protection during routine use. It can be magnetically attached for ease of use, and the back lit LCD allows easy viewing of the display in poor light conditions.Key Features Differential Inputs°C / °F SelectableWater Resistant’On’/’Off’ and ’Hold’ functionsYellow Rugged case with protective rubber bootBacklit Digital DisplayMagnetic attachment or tilt standAuto off after 12 minutesMin/Max functionSelectable inputLong battery life: typically 500 hours (battery 2xAA not supplied)

The Digitron Probes are tough in construction which makes them most sought after solution in hazardous atmospheres for measuring temperature. Certified for use in flammable or explosive atmospheres

Digitron Digital Thermometer The Digitron wireless digital thermometer is a new age measuring device with 2 channels with a temperature ranging from -30°C to 40°C (-22ºF to 104ºF). The wireless technology of the refrigerator allows you to view temperatures of food without opening the refrigerator door. Temperatures from the remote RF sensors positioned inside your fridge or freezer are transmitted wirelessly and displayed on the base station that can be mounted magnetically to the cabinet or free standing using the fold-away bracket. The display is updated every 8 minutes. The audible and visual alarms are triggered when the temperature exceeds pre-set maximum and minimum temperatures after 15 minutes (this prevents false alarms when the door opened for loading) alerting you to raise or lower temperatures that could affect the product quality. Features and Benefits Wireless signal from remote sensors to base stationAudible and visual alarmTransmission range is up to 20m Both channels displayed simultaneouslyEasy shift between °C and °F as required by the userLicence free frequencyLow battery indicatorMagnetic, wall mounting or free standing fixing baseRemote sensors equipped with spring action clips to secure inside fridge/freezer or alternative suction cups2 x AAA Alkaline batteries for base station and sensor Applications FreezersFridgesGreenhousesIncubatorsTransportation Vaccine storage Certifications ANSI/ESD S20.20:2014 BS EN 61340-5-1:2007

2028P and 2088P 0-1bar Differential Manometers The 2000 Series of pressure instruments offer a wide range of hand held manometers. Easy to operate, reliable and built to last, the 2000 series has been developed to meet the performance and cost demands of today’s markets.The 2000 series offers the widest range of hand held manometers world-wide. New innovative functions designed to make the operator’s job easier set new standards in pressure measurements. Feature and Benefits Pressure ranges from 1 mbar to 10 bar (0.40218 inH2O to 4021.8 inH2O)Pressure range configurable from 10bar to 500bar with an external transducer (2024P & 2084P only)Logging and leak testingAutoranging displays for precise readingsSelectable auto switch-off 2-year warrantyOverrange protection IP67 (1 m depth for 30 mins) BSI Cert229/000132 Negative and positive reading Applications The range of 2000P instruments are suitable or gauge, differential or absolute measurements over a wide range of pressures. They are not suitable for use with corrosive substances or cyclic hydrocarbons, for example, motor oil, transmission fluid and Freon.To use the 2000P with these components, isolation must be provided in the form of a buffer, such as a mineral oil or dry air.

Digitron 2146T Thermistor Food Thermometer Fast response thermometer ideal for use within the food industry. Food safe keypad to eliminate potential food trapsFast response display IP67 waterproofIncorporates the food industry standard Lumberg connector for thermistor probes (available separately)Long battery life - typically 1- 2 hours continuous use for 2 years with 2 x AA batteries (supplied)Robust case for long life in harsh environmentsDisplay hold facilityIsolated battery compartmentThese instruments can be calibrated with probes listed as a System Calibration. To order please use the System Cal. stock number of the instrument and the System Cal. stock number of the probe.

Digitron 2106T Thermocouple Thermometer The Digitron 2106T thermometer is ideal for use within the food industry. Food safe keypad to eliminate potential food trapsFast response displayIP67 waterproofIncorporate the food industry standard Lumberg connector for thermistor and the type T thermocouple probes (supplied separately)Long battery life - typically 1-2 hours continuous use for 2 yearsRobust case for long life in harsh environmentsDisplay hold facilityIsolated battery compartmentThese instruments can be calibrated with probes listed as a System Calibration. To order please use the System Cal. stock number of the instrument and the System Cal. stock number of the probe.

Digitron FM35 – Thermistor Food Thermometer Fast response digital hand-held thermometer for food industry useLarge LCD display with rubber on/off key and protective rubber bootLumberg connector allows selection and replacement of probesOpen probe indicationLong battery life and auto power off after 3 minutes