Dow Corning 799 EU Glaze and Go Neutral Sealant Neutral cureLow modulus, high elasticityGood unprimed adhesion to a variety of substratesNon-corrosive to metalsEasy to apply and toolLow odorUV ResistantContains fungicide Applications: Glazing and weathersealing of windowsDurable adhesion to most porous and non-porous substrates including masonry, brick, aluminium, PVC, glass and glazed surfaces

Firestop 700 Silicone Sealant Firestop 700 is a one part, neutral curing silicone sealant used for the prevention of smoke and flames through expansion joints, or penetration seals in curtain walling, building facades or partition walls. Up to 4 hour fire rating can be achievedExcellent un-primed adhesion to most porous and non-porous construction substrates, including concrete, stone, steel, masonry, brick, wood etc.Excellent weathering characteristics including resistance to ozone, UV radiation and temperature extremesHalogen free Hardness: 20 Shore AFire ratings achieved have been tested to BS476 Part 22//1987 (ISO 834) and are specific to the condition of test

Acetoxy Silicone Sealant A one component, ready to use silicone sealant which offers fast cure and good weathering characteristics. Suitable for use on aluminium, glass, Formica and most other non-porous surfaces. Listed by UK Water Fittings Byelaws Scheme for use in contact with potable water once cured. Weather sealing of sheet cladding, curtain wallsDraught proofing and general internal sealing applicationsConforms to ISO 11600-G-20HMHigh modulus acetoxy cureFast cure tack free in one hourJoint movement capability ±25%100% recovery

Sealant & Wipes Dow Corning Marine Silicone High grade Marine silicone sealant for creating watertight cosmetic sealsSuitable for applications above and below waterlineQuick skin, tack free and cure characteristicsUnrivalled adhesion to porous and non porous substratesExcellent weathering characteristics including fresh/salt water, UV and OzoneHighly flexible and abrasion resistant-40°C to +150°C

Dow Corning Firestop Putty Aerosol The Dow Corning white, 310ml firestop putty cartridge is an intumescent acrylic sealant for internal pointing around the door and window frames where damage due to smoke and flame needs to be kept to a minimum and in the small joints formed where fire-rated partition sections meet. It has intumescent qualities which enable the material to swell under heat conditions to produce a fire and smoke-resistant seal. Features and Benefits Up to 2 hour fire-rating can be achievedGood un-primed adhesion to most common construction materialsResists mildew and mould growthRemains flexibleEasy to use Certifications EUH210EUH208

Mildew Resistant Silicone Sealant A one-part, acetoxy, silicone rubber sealant which has excellent adhesion to a variety of surfaces.Contains a food grade fungicide.,Ideal for sealing refrigeration units and areas where food contact is likely. (Meets US Food and Drugs Administration Regulation Number 21CFR177.2600) Conforms to BS5889 Type BFast cureHigh modulus-acetoxy cure type

Dow Corning 798 Neutral Sealant High quality neutral SiliconeFood safe refrigeration unit sealantFor intermittent food contactFast cure - tack free in 2 hoursHigh movement flexibility ±50%Conforms to ISO 11600-F&G-25LM

Mildew Resistant Silicone Sealant A one-part, acetoxy, silicone rubber sealant which has excellent adhesion to a variety of surfaces.Contains a food grade fungicide.,Ideal for sealing refrigeration units and areas where food contact is likely. (Meets US Food and Drugs Administration Regulation Number 21CFR177.2600) Conforms to BS5889 Type BFast cureHigh modulus-acetoxy cure type

Dow Corning Firestop Putty Aerosol The Dow Corning pink, 750ml firestop putty aerosol is a moisture-curing, one-component polyurethane foam with fire-rated properties. The product is composed of Polyurethane and contains environmentally safe propellant. It is fire resistant for up to 5 hours. Features and Benefits Adheres to most common building materials including wood, concrete, wallboard and plastic, except for smooth-surfaced polyethene, silicone, oil and grease or similar substratesCan be used at a temperature ranging between 5°C and 30°C. The optimal processing temperature ranges between 18°C and 25°CFull foam setting time is 12 hours Foam can be cut after 1 hour. Once fully set, the foam can be trimmed, sawn, sanded, painted or plastered overThermally stable between -40°C and 100°C Durable and permanent except when exposed to UV-rays The heat insulation values are excellentPink colour for easy identification Applications Restoring the original fire rating for specific penetrations in fire rated walls or floorsSealing connection joints between different building materialsAid to mechanically fixing and insulating window frames and entrance door liningsFilling and insulating gaps, cracks and cavities within various building materials Certifications DIN 4102 - 1 EN1366-4: 2006 BS476: Part20: 1987ANSI/ESD S20.20:2014BS EN 61340-5-1:2007