e2s Sounder Beacon The e2s DC flashy sounder beacon with the red lens has sound level outputs up to 117dB (A) at 1m. This device provides 32 alarm tones options and 3 remotely selectable stages. The alarm horn and Xenon beacon can be connected from a single power supply for simultaneous operation or from separate supplies for independent operation. Features and Benefits The supply voltage is 24VDC<BR/>Rated for zone 1 and 2, gas group IIB<BR/>Good resistance to humidity and salt spray environments<BR/>Can be connected from a single supply for simultaneous, or separate supplies for independent operation of the sounder and beacon<BR/>Manufactured from corrosion proof, marine grade copper free LM6 aluminium with a chromate and powder coat finish <BR/>Operating temperature is between -50°C and 70°C Certifications Certificates: <BR/>RU C-GB.AA71.B.00109 <BR/>INMETRO certificate: 1<BR/>Approvals:<BR/>IECEx KEM 10.0025X <BR/>ATEX KEMA 01ATEX2223X TR-CU Ex EAC <BR/><BR/>GOST-R: 1ExdIIBT4<BR/>IP66/67 rated

<B>E2S BExS110 Explosion Proof Alarm Horn Sounder</B> E2S BExS110 series explosion proof very high output horn alarm sounder with output up to 117dB (A) at 1m, suitable for Zone 1, 2, 21 & 22 applications. These devices feature 32 alarm tones options and 3 selectable alarm stages/channels. The BEx explosion proof range is constructed from corrosion proof, marine grade copper free LM6 aluminium with chromate and powder coat finish. The range features stainless steel, ratchet adjustable mounting brackets and has been ingress protection tested to IP66/67. <B>Features and Benefits</B> <ul><li>Marine grade, corrosion proof, LM6 aluminium enclosure</li><BR/><li>Automatic synchronisation on multi-sounder system</li><BR/><li>Ratchet adjustable stainless steel &#146;U&#146; bracket for 360° positioning</li><BR/><li>Stainless steel fixings</li><BR/><li>Ingress protection IP66/67</li><BR/><li>Dual M20 cable entries</li><BR/><li>Reverse polarity diode fitted</li><BR/><li>Operating temperature is between -50°C and +75°C</li></ul> <B>Approvals</B> <ul><li>IECEx KEM 10.0003X</li><BR/><li>ATEX KEMA 99ATEX6312X</li><BR/><li>TR-CU Ex EAC certificate: RU C-GB.AA71.B.00109</li><BR/><li>VdS certificate: G206011</li><BR/><li>CPD certificate: 0786-CPD-20225</li><BR/><li>SIL 1 compliant to IEC 61508 (2010) – standard</li><BR/><li>INMETRO certificate: 10-IEx-0009</li><BR/><li>Marine Equipment Directive (MED) Certificate: MEDB00001BU</li><BR/><li>CCOE PESO</li></ul>

e2s Beacon The e2s red lens xenon beacon is a flame-proof alarm, ideal for general signalling duties whilst their robust construction makes installation in the harshest of environments. It has additional features include, automatic synchronisation on multi-beacon systems and a stainless steel guard and mounting bracket as a standard. It has enclosures manufactured from corrosion-proof, marine-grade, copper-free LM6 aluminium which is phosphate and powder coated. Features and Benefits The supply voltage ranging from 20VDC to 28VDC <BR/>5J energy <BR/>Gas-proof and dust ignition-proof beacons<BR/>Light effect is flashing<BR/>Automatic synchronisation on multi-beacon systems<BR/>Can be set to 'flip-flop' alternating mode with other units on multi-beacon systems<BR/>Xenon tubes mechanically secured against shock/vibration<BR/>Good resistance to humidity and salt spray environments<BR/>Very large termination area<BR/>Ratchet adjustable stainless steel &#146;U&#146; bracket<BR/>IN & OUT terminals<BR/>Base width is 153.6mm and height is 246mm<BR/>Cable entire is 2 x M20 <BR/>Operating voltage ranges between -50°C and 70°C Applications Traffic control signalling<BR/>Hazard awareness <BR/>Vehicle safety<BR/>Police, Fire and highways lights Certifications ATEX approved <BR/>IECEx approved<BR/>INMETRO approved <BR/>GOST-R approved<BR/>IP66 rated<BR/>IP67 rated<BR/>CE certified <BR/>EN 60079-0 : 2006<BR/>EN 60079-1 : 2007<BR/>EN 60079-7 : 2003<BR/>EN 61241-0 : 2006<BR/>EN 61241-1 : 2004

e2s Beacon The e2s amber lens xenon beacon is a flame-proof alarm, ideal for general signalling duties whilst their robust construction makes installation in the harshest of environments possible. Its additional features include automatic synchronisation on multi-beacon systems and stainless steel guard and mounting bracket as a standard. It has enclosures manufactured from corrosion-proof, marine-grade, copper-free LM6 aluminium that is phosphate and powder coated. Features and Benefits The supply voltage is 230VAC<BR/>5J energy <BR/>Gas-proof and dust ignition-proof beacons<BR/>Light effect is flashing<BR/>Automatic synchronisation on multi-beacon systems<BR/>Can be set to 'flip-flop' alternating mode with other units on multi-beacon systems<BR/>Xenon tubes mechanically secured against shock/vibration<BR/>Good resistance to humidity and salt spray environments<BR/>Very large termination area<BR/>Ratchet adjustable stainless steel &#146;U&#146; bracket<BR/>IN & OUT terminals<BR/>Base width is 153.6mm and height is 246mm<BR/>Cable entire is 2 x M20 <BR/>Operating voltage ranges between -50°C and 70°C Applications Traffic control signalling<BR/>Hazard awareness <BR/>Vehicle safety<BR/>Police, Fire and highways lights Certifications ATEX approved <BR/>IECEx approved<BR/>INMETRO approved <BR/>GOST-R approved<BR/>IP66 rated<BR/>IP67 rated<BR/>CE certified <BR/>EN 60079-0 : 2006<BR/>EN 60079-1 : 2007<BR/>EN 60079-7 : 2003<BR/>EN 61241-0 : 2006<BR/>EN 61241-1 : 2004

e2s Beacon The e2s red lens xenon beacon is ideal for all the general signalling applications, including fire security and process control. This can be stacked to provide multi-signal status lights. It also incorporates bright flashy 5J xenon signals. Features and Benefits The supply voltage ranging from 20VDC to 28VDC<BR/>Continuously rated <BR/>Synchronised 1Hz flash with adjacent beacons connected to the same supply<BR/>Polycarbonate lens<BR/>Xenon tube life is 5 million flashes<BR/> effect <BR/>Base length is 86mm and height is 83mm<BR/>Operating voltage ranges between -25°C and 55°C Applications Traffic control signalling<BR/>Hazard awareness <BR/>Vehicle safety<BR/>Police, Fire and highways lights Certifications IP66 rated<BR/>UL approved<BR/>CE certified

e2s Beacon The e2s amber lens xenon beacon is ideal for all the general signalling applications, including fire security and process control. It also incorporates bright flashy 5J xenon signals. Features and Benefits The supply voltage ranging from 10VDC and 14VDC<BR/>Can be stacked to provide multi-signal status lights <BR/>Continuously rated <BR/>Synchronised 1Hz flash with adjacent beacons connected to the same supply<BR/>Polycarbonate lens<BR/>Flame retardant ABS case<BR/>Xenon tube life is 5 million flashes<BR/>Cable entry is M20 knockouts<BR/>Base width is 86mm and height is 83mm<BR/>Operating voltage ranges between -25°C and 55°C Applications Traffic control signalling<BR/>Hazard awareness <BR/>Vehicle safety<BR/>Police, Fire and highways lights Certifications IP66 rated<BR/>UL approved<BR/>CE certified

Low Current Bedhead 25mm behind panel depth<BR/>3 alarm stage options<BR/>UL94V0 flame retardent ABS case

e2s High Output Sounder The e2s high output sounder is a 32-tone alarm with a sound output of 126dB(A) at a distance of up to 1m. It is a 3 stage alarm with volume control. It works on a supply voltage of 10VDC to 30VDC. The sounder has a grey body colour and is surface mount. Features and Benefits Automatic synchronisation on multi-sounder system<BR/>Continuously rated<BR/>Stainless steel fixings<BR/>Unit can be mounted using external lugs or internal BESA compatible fixing positions<BR/>Duplicate cable terminations (in and out for daisy-chain installations)<BR/>Tropicalisation available on request<BR/>Available with custom tone configurations and frequencies<BR/>&#146;Programmable&#146; version available<BR/>45 alarm tones<BR/>4 remotely selectable stages<BR/>Any tone can be assigned to Any stage<BR/>User configurable continuous frequency tone Applications Fire alarm<BR/>Security<BR/>Process Control Certifications VdS approved to EN54-3 (CPD 89/106/EEC)<BR/>UKOOA/PFEER compliant alarm tones<BR/>UL approved <BR/>GOST-R approved<BR/>IP67 rated

e2s High Output Marine Sounder The e2s high output marine sounder 32-tone alarm with sound output level up to 121dB at a distance of up to 1m. It works on a supply voltage of 24VDC. The sounder has a red body colour and is surface mount. Features and Benefits UL94V0 flame retardant ABS case<BR/>3 alarm stage options<BR/>Automatic synchronisation on multi-sounder systems<BR/>Stainless steel mounting brackets<BR/>Automatic synchronisation on multi-sounder system<BR/>Continuously rated<BR/>Large termination area<BR/>Stainless steel fixings<BR/>Ratchet adjustable stainless steel &#146;U&#146; bracket for 360° positioning<BR/>Duplicate cable terminations (in & out for daisy-chain installations)<BR/>Tropicalisation available on request<BR/>Available with custom tone configurations and frequencies<BR/>&#146;Programmable&#146; version available<BR/>32 alarm tones<BR/>4 remotely selectable stages<BR/>Any tone can be assigned to Any stage<BR/>User configurable continuous frequency tone Applications Fire alarm<BR/>Security<BR/>Process Control Certifications UKOOA/PFEER compliant alarm tones<BR/>GOST-R approved. Cert: POCC GB.JB05.H00144

The e2s A105NSONTEL Telephone initiated alarm sounder is a compact, high output, 105dB(A) has a choice of three alarm tone frequencies. Automatic synchronisation<BR/>Continuously rated<BR/>Dual M20 x 1.5 mm threaded cable entries <BR/>Duplicate pluggable cable terminations Class A<BR/>Ingress protection IP66 Type 4/4X/13/3R<BR/>64 alarm tone frequencies and 4 remotely activated alarm stages<BR/>Available with custom tone configurations and frequencies<BR/>Diode polarized for use in supervised circuit

The e2s A112N Alarm horn sounder N is a high output 120dB(A) automatically synchronised alarm horn sounder, globally approved for fire, marine and general signalling<BR/>applications, featuring 64 alarm tone frequencies and 4 remotely activated stages/channels, the A112N employs the latest in reliable D Class amplifier technology for superior sound output with low current consumption. Automatic synchronisation<BR/>Continuously rated<BR/>Dual M20 or 1/2 NPT clearance cable entries<BR/>Duplicate pluggable cable terminations Class A<BR/>Ingress protection IP66 Type 4/4X/13/3R<BR/>64 alarm tone frequencies and 4 remotely activated alarm stages<BR/>Available with custom tone configurations and frequencies<BR/>Diode polarized for use in supervised circuits

The e2s AL105NX alarm horn sounder and xenon strobe beacon is the industry standard for combined audible and visual signalling, the high output 113dB(A) alarm horn sounder is combined with a 5 Joule, 200cd Xenon strobe beacon, CPR complaint, EN54-3 and EN54-23 tested and UL/cUL approved for private mode fire use also featuring 64 alarm tone frequencies and 4 remotely activated stages/channels and globally approved for fire, marine and general applications the low current consumption and high<BR/>SPL in a robust fire retardant enclosure. Automatic synchronisation<BR/>Continuously rated<BR/>Dual M20 x 1.5 mm threaded cable entries <BR/>Duplicate pluggable cable terminations Class A<BR/>Ingress protection IP66 Type 4/4X/13/3R<BR/>64 alarm tone frequencies and 4 remotely activated alarm stages<BR/>Available with custom tone configurations and frequencies<BR/>Diode polarized for use in supervised circuits