Plastic Snap-action Rivets Two-part construction, re-useable, and require no fixing toolsSuitable for a wide range of light-duty fixing applicationsVarious sizes available to cover a panel thickness/gripping range of 1 to 8·5mmMade from nylon 6, available in Black or WhiteWorking temperature range -40°C to 85°C

Snap Rivet Circuit Board Support Circuit board supports designed to mount on a chassis and be secured with a plastic rivet. The rivet and support can be push-fitted together quickly and easily. Rivet is flush fitting and gives minimal protrusion under the chassis. Material: Nylon 66Colour: NaturalPCB Thickness 1.6mmFixing hole 4mm

Guide rails Economical, quick-install guide rails.For boards1.6 mm thick.

Key Slot with Locking Bayonet Nose A PCB support that is designed to fit and lock into key slots on the chassisEasily installed or removed by hand Made from natural nylon 66 for high durabilityMinimal protrusion of 2.5mm on underside of chassisPCB/Chassis Thickness 1.6mmPCB hole diameter 4mmChassis hole diameter 7.1mmOutside diameter 10.2mm

PGSC centring nozzle Nylon nozzle for mechanical protection of cables and wires

RRH Series Use as a filter for common mode interferencesFor common mode and power signal insertion lossesMake sure you have the right impedance for the frequency when you select your ferrite core

RT Series Use as a filter for common-mode interference and for common mode and power signal insertion losses. Make sure you have the right impedance for the frequency when you select your ferrite core.For one or more coils. Especially suited for wires, coaxial cables, twisted pairs and multi-core cables.

Ferrite cores for ribbon cables, RFS series, non-split Non-split ferrite cores for 15 → 38-pin ribbon cables to use as filters for common mode interferences and to attenuate interferences in data cables.

RT Series Use as a filter for common-mode interference and for common mode and power signal insertion losses. Make sure you have the right impedance for the frequency when you select your ferrite core.For one or more coils. Especially suited for wires, coaxial cables, twisted pairs and multi-core cables.

Male / female M3 metallic spacers. Male / female metallic spacers, made of nickel-plated brass and supplied in packs of 100.All models have M3 threads and tapping.

Standard PCB Pillars Moulded natural coloured Nylon 66 pillars for mounting or spacing PCBs Suitable self-tapping fixing screws No. 6 x 6.3mm type (supplied separately)The stacking pillars may be used to stack PCBs one above the other, the last board being retained by the capsFixing hole 4 mm

Spiral Tube Features and Benefits • Cable tie for flexible routing of cable harnesses• Suitable for wires and cables of any kind• Quick and easy assembly• Wire ends can be withdrawn at any spot on the cable harness• Good resistance to bases, weak acids and organic solvents• Limited resistance to chlorate solvent• Not UV stabilised