SimpliFiber Pro Interchangeable Adapters

Fluke Networks Fibre Optic Test Equipment The Fluke Networks FI-500 fibre optic test equipment helps in getting rid of the hassle associated with inspecting fibre end faces, especially in low light and high cable density situations. This test equipment is designed to simplify the inspection process. It fills the gap between a manual scope and a fully automated inspection scope. It has the simplicity and practicality of a manual inspection scope along with advanced features to reduce troubleshooting and inspection time. It is supplied with a FiberInspector probe, display, 4 UPC tips, case, rechargeable batteries and universal power adapter. Features and Benefits Port Bright a built-in flashlight that illuminates dark areas and dense panelsAutofocus feature for stable images in few secondsLarge display to view single-mode and multimode fibre end facesIncludes 4 UPC tips (LC, SC, 1.25mm and 2.50mm)The small-profile probe fits into tight spots and features push button controls for simple operationAPC tips available3.2in TFT LCD display with resolution 320 x 240Display magnification options are 1x, 2x, 4xDisplay Fps is greater than or equal to 122 rechargeable NiMH batteries for display with rating 1.2V and 2700mAhPower adapter input rating for display is 100VAC to 240VAC ±10% at 50/60Hz with output of 6VDC and 3AProbe magnification with 200x zoom function has 1x, 2x and 4x settingsProbe 5MP camera with CMOS sensorProbe field with view of 610μm x 460μmProbe resolution is 1μmLight source through LED has life greater than 100000 hoursCoaxial blue LED for end face Illumination2 white LEDs for port IlluminationPower to probe is supplied through the USB interfaceProbe video output through USB 2.0 interface Applications Measure and locate high loss splicesMeasure and locate high loss connections and breaksLocate the end of a fibreFind potential sources of errors caused by reflectance from dirty or poor connectionsDetect live optical signals before it begins testing Certifications IEC 61010-1IEC 62133

FLUKE Networks Fibre Tester, Cleaning Kit Included, 200x Magnification - FI-525 Want a fuss-free way to inspect and test fibre optic cables? Grab this fibre tester from FLUKE Networks. It cleverly blends the high-tech features of an automated inspection scope with the convenient portability of a manual tool. A PortBright built-in torch illuminates dark spaces without the need for an extra light source. This set comes equipped with a soft carrying case for portability and a cleaning kit to keep your optical connections contaminant-free. Features & Benefits • Pause button includes an autocentre feature for accurate fibre core inspection• Autofocus feature gives crystal-clear visuals at the push of a button• Compact probe has small dimensions of 51 (L) x 23mm (W), so it's a streamlined addition to your kit• Versatile display lets you switch between single-mode and multimode fibre end faces Applications • Telecommunication centres• Data transmission networks• Cable repairs What type of plug does this fibre tester use? The unit comes equipped with a Type B 3-pin plug and universal power adapter for broad compatibility. What conditions can I use this tester in? The tool's operating temperature range of 0°C to +40°C means it reliably performs in the most fieldwork settings.

Fluke Networks Video, Data & Voice Wiring Tester Microscanner 2 This Fluke MicroScanner cable tester has all the testing capability of the MS2-100, but includes all accessories in a single, preconfigured carry case. Being supplied with various products including an Ethernet patch cord and owners CDs, perfect for a variety of applications. Featuring a revolutionary Interface, graphical wiremap, length, cable ID and distance to fault, displayed all on one screen. Multimedia Support tests all common media types including RJ11, RJ45, Coax, with no need for adapters or other connectors. Trace virtually any cable or wire pair with IntelliTone™ technology. Rugged Housing with an integrated rubber holster which enhances grip and makes it durable enough for the toughest of jobs.Oversized backlit display, LCD providing a crystal clear view, whether in bright sunshine or in a dark closet. Features and Benefits: • Video, data and audio testing• Reduces test time and user error• Eliminates need for test adapters• Rules out service problems fast, decreases down time• Locates cables in seconds• Tough and durable• Category II surge voltage What is IntelliTone™ technology? This technology is cutting-edge, it zeroes in on cables with a digital signal-toning and signal-interpreting process. Using a smart, synchronised digital signal it energises cable conductors. Multiple tone types are used in the signal which helps to locate the correct cable bundle, Isolate a cable within a bundle and Verify cable conductor continuity.

Fluke Networks LAN Test Probe The Fluke Networks IntelliTone 200 LAN test probe has smart digital signal processing which identifies the unique signal with audio and LED visual indicators. Probe's microprocessor-controlled signal identification technology rejects noise and false signals to identify cable location. This can save you hours every week on cable location projects. The probe features a Cable map capability that identifies common cable miswires in twisted pair cabling. Features and Benefits 8 LED indicatorsMicroprocessor controlled audio filesAudible and visual signal indication simplifies cable location in noisy environmentsDiagnoses essential cable information with polarity, continuity and talk batterySafely and effectively tones active networksAdditional probes can be ordered separatelyTurns off automatically after one hour of inactivityThumbwheel switchVolume control wheel Applications Security systemsData centresTelecommunication Certifications ANSI/ESD S20.20:2014BS EN 61340-5-1:2007

Replacement Microscanner PoE Wiremap Adapter

Fluke Networks MicroScanner 2 Cable Verifier (369-564) The Fluke MicroScanner 2 Cable Verifier is a video, data and voice wiring tester and is a great device for installing and troubleshooting Ethernet devices.Toggling between modes has now been eliminated, speeding up the testing process and reducing error. Fluke Networks cable verifier has the ability to display key results, pair lengths, distance to fault, cable ID, far-end devices and wiremap all on just one screen. Built-in RJ11, RJ45 and coax support also prevent the need for additional adaptors and connectors that in the past could have been lost or broken, ethernet jacks, CATV and telephoned jacks can be tested straight from the main unit.The MicroScanner 2 gives engineers and technicians more visibility in the verification of video services, voice, data and virtually any cable or wire pair. Bundles, patch panels, switches, wall outlets and high-grade data cabling can be located using digital mode. Analog mode allows for location of coax, speaker wiring, security or alarm and voice-grade cabling. Harsh work environments call for a strong, reliable and robust device, the MicroScanner is just that. Featuring a rubber wrap-around holster the device is not only protected if dropped but easy to grip, a vinyl carry pouch is also included for convenience and added protection. Features and Benefits: • Built-in IntelliTone™ technology• Displays cable length, wiremap, cable ID, and distance to fault on one screen• Tests all common media types, including RJ11, RJ45, Coaxial, with no adaptors• Wiremap adapter, also a protective cap• Oversized LCD backlit display for clear results• Rubber holster for durability and great grip• Digital toning• PoE detection• Graphical wiremap shows type and location of fault• Dimensions – 76 mm x 163 mm x 36 mm• Battery type 2 x AA alkaline batteries What is IntelliTone™ technology? This technology is cutting-edge, it zeroes in on cables with a digital signal-toning and signal-interpreting process. Using a smart, synchronised digital signal it energises cable conductors. Multiple tone types are used in the signal which helps to locate the correct cable bundle, isolate a cable within a bundle and Verify cable conductor continuity. Also available:369-570 - Fluke Networks MS2-POUCH Pouch for MicroScanner Cable Verifier369-576 - Fluke Networks MS2-IDK27 Remote Identifier Kit for MicroScanner Cable Verifier

Remote ID Kits for Microscanner PoE

Pro-Tool Kits Essential tools for cutting and stripping wires and cablesErgonomically designed Dur-a-Grip pouch for convenient tool storage on belt

Fluke Networks Quick Clean 1.25 mm Cleaner Fluke Networks Quick Clean 1.25 mm Cleaner is designed to clean LC, LC secure keyed and MU connectors. Unlike traditional swab cleaners that rely on the technique of the user, the Quick Clean Cleaners provide consistent cleaning every time. The operator can easily engage the cleaner using a simple push motion, an audible "click" is heard when the process is completed. These tools are effective at removing contaminants during fibre optic installation that include: • Road Dust (ISO 12103-1) • Skin Oil Residue • Salt Water Residue • Alcohol Residue • Vegetable Residue • Graphite Dryer Lint • Hand Lotion • Distilled Water Residue Features and Benefits • Moulded with an antistatic material • Simple pushing motion to engage tool • Audible CLICK to alert the user when tool is fully engaged • Clean over 525 end faces per unit • Tip extender to 208 mm for hard to reach connectors • Crush resistant to over 250 N • Impact resistant to survive drops over 1.5 m

SMC-9-SCSC Singlemode Launch Cable Fluke Networks MMC-9-SCSC is a 9μm SC/LC Singlemode Launch Cable. Connectors: 2 x SC single mode maleConnector Type: SC/SC9 μmFor use with OptiFiber Pro OTDR and DTX-1800 OTDR

Fluke Networks MicroMapper™ Wiremap Checker Compact with high durability, Fluke Networks presents this handheld video, data & voice cable tester designed for network professionals.Quickly and easily verify the integrity of Ethernet twisted pair cables. Whether you need to test for shorts, crossed, split, opens or reversed pairs you can simply press the test button to view the results. With no additional switches, just one switches to cable position for testing and detecting faults. If cables are hidden in walls, floors, bundles or ceilings the Microprobe cable tracer can trace them in conjunction with the tone generator function. Included is a remote unit and patch cords for one-person testing, making light work of testing and eliminating the need for separate connectors. Features and Benefits: • Easy to read LED fault indicators• Powerful tone generator for hidden cables• Separate remote unit• Quick testing with the push of a button• Verification of shield integrity• Auto-sleep mode• Debug-mode for detailed fault identification