Gems Sensors Float Switch The Gems Sensors float switch is designed for higher temperatures and in pressurized or corrosive liquids. It is an exceptionally accurate and rugged switch. <BR/>It has mounting thread G1/4in<BR/><BR/>Warning:<BR/>The cable entry point must not be submerged under any circumstances<BR/>They must be fitted through the wall of a tank on the horizontal switches so that the cable is on the outside<BR/>On the vertical type, the mounting thread and cable entry must be above the highest level of the liquid Features and Benefits Operating pressure is 30bar<BR/>Depth of immersion is 30mm<BR/>Min SG of liquids is 0.75<BR/>Reed switch is SPST 100V<BR/>Electrical High temperature version AWG18 PTFE Certifications IP64 rated

Gems Sensors Float Switch The Gems Sensors float switch is designed for higher temperatures and in pressurized or corrosive liquids. It is an exceptionally accurate and rugged switch. <BR/>It has mounting thread G1/4in<BR/><BR/>Warning:<BR/>The cable entry point must not be submerged under any circumstances<BR/>They must be fitted through the wall of a tank on the horizontal switches so that the cable is on the outside<BR/>On the vertical type, the mounting thread and cable entry must be above the highest level of the liquid Features and Benefits Operating pressure is 30bar<BR/>Depth of immersion is 30mm<BR/>Min SG of liquids is 0.75<BR/>Reed switch is SPST 100V Certifications IP64 rated

Gems Sensors Float Switch The Gems Sensors float switch is designed for higher temperatures and in pressurized or corrosive liquids. It is an exceptionally accurate and rugged switch. <BR/>It has mounting thread G1/4in<BR/><BR/>Warning:<BR/>The cable entry point must not be submerged under any circumstances<BR/>They must be fitted through the wall of a tank on the horizontal switches so that the cable is on the outside<BR/>On the vertical type, the mounting thread and cable entry must be above the highest level of the liquid Features and Benefits Operating pressure is 30bar<BR/>Depth of immersion is 30mm<BR/>Min SG of liquids is 0.75<BR/>Reed switch is SPST 100V Certifications IP64 rated

Gems Sensors Float Switch The Gems Sensors float switch is designed for higher temperatures and in pressurized or corrosive liquids. It is an exceptionally accurate and rugged switch. <BR/>It has mounting thread G1/8in Features and Benefits Operating pressure is 20bar<BR/>Depth of immersion is 21mm<BR/>Min SG of liquids is 0.85<BR/>Reed switch is SPST 50VA Certifications IP64 rated

Metal Level Switches – Series 1900 With large float displacement, switch withstands rough service<BR/>IP64 rated <BR/>Output is SPST normally open <BR/>Suitable for high viscosity liquids

Gems Sensors Metal Switch The Gems Sensors metal switch is the latest innovation that offers broad chemical compatibility for general purpose applications. This device is also ideal for oils and water. With SPST output, it will either be normally closed or opened. Depending on the orientation of the float, the position can be reversed.<BR/><BR/>Warning:<BR/>The cable entry point must not be submerged under any circumstances<BR/>They must be fitted through the wall of a tank on the horizontal switches so that the cable is on the outside<BR/>On the vertical type, the mounting thread and cable entry must be above the highest level of the liquid Features and Benefits Operating pressure is 10bar<BR/>Depth of immersion is 9mm<BR/>Min SG of liquids is 0.45<BR/>Mounting thread is G1/8 Certifications IP64 rated

Gems Sensors Level Switch The Gems Sensors ELS-1100 series horizontal/vertical level switch has a polysulfone body. It has a maximum operating pressure of 150psi. The switch has a variety of mountings, power requirements and electrical terminations to make it easy to find a perfect match for your application. It can be mounted in any position as either a high or low-level alarm. The wet sinking switch is used in the presence of liquid and dry on the absence. Features and Benefits Direct load switch output<BR/>Small size<BR/>Economically priced<BR/>Built-in, solid-state electronics <BR/>No moving part<BR/>Triangular prism, not susceptible to droplets <BR/>Simple, one-unit installation<BR/>Current consumption 18mA <BR/>Open collector output<BR/>Non-ESD sensitive<BR/>Polysulfone wetted parts<BR/>Flange mount via 19mm hole or flush mount (M12 x 1mm)<BR/>Electrical connection via lead wire 22awg PVC 0.3m<BR/>Flange-mount versions with Viton seal are suitable for thin-walled tanks Applications Medical laboratory<BR/>Food and beverage system<BR/>Pharmaceuticals<BR/>Petrochemicals<BR/>Leak detection<BR/>Hydraulic reservoirs<BR/>Machine tool

FS-3 Series Flow Switch These ultra compact switches have been specially designed for reliable operation in clean post-filtered water. FS-3 switches are instrument quality, yet affordably priced for pure water equipment, from UV lamp switching to filter life monitoring. Also suited to some chemical applications and various cooling applications. Features and Benefits &#149; 0.2 l/min - 3.8 l/min with pre-adjusted set points &#149; Operating pressure: 10 bar at 20°C &#149; Inlet/Outlet ports: 1/4" NPT, R 1/4" &#149; Any mounting position Product Application Information &#149; Electronic Equipment: Laser Heads, Welders, Power Supplies, High-Speed Spindles, X-Ray Tubes, Semiconductor Equipment &#149; Bearings or Gears: Presses, Rotating Equipment, Conveyors, Machine Tools, Robotics &#149; Processing and Dispensing Equipment: Water Purifications and Filtering, X-Ray Film Processing, Beverage Dispensing, Chemical Additives, Gas Sampling, Distilling

Solid State Electro-Optic Level Sensors Can be mounted in any position as either a high or low level alarm<BR/>Wet or dry sinking models available (N/O or N/C). Wet sinking switches on the presence of liquid, dry on the absence<BR/>Open collector output <BR/>Non ESD sensitive<BR/>Polysulfone wetted parts<BR/>Flange mount via 19mm hole or Flush mount (M12 x 1mm)<BR/>Flange-mount versions with Viton seal are suitable for thin-walled tanks, etc<BR/>Electrical connection via leadwire 22 awg PVC 0.3m

Gems Sensors Flow Switch The Gems Sensors FS-200E-A series flow switch has a liquid flow rate of 3L/min to 22.5L/min. This flow switch is a highly efficient device for accurate flow detection. It has 1% repeatability and is available in European G1in port size. The durable construction delivers long life repeatability in either water or oil. On the other hand, the design of large flow paths keeps the pressure drop low. Thus, it is ideal for detection of flow in high volume lubrication, cooling, or process applications. Features and Benefits Pipe diameter range is 1in<BR/>Connection type is 1 BSP<BR/>Plug type connector<BR/>Primary construction material is bronze<BR/>Setting type: adjustable<BR/>Operating pressure is 27bar<BR/>Pressure drop is 0.2bar<BR/>SPDT switching function<BR/>Connection type is 1 BSP Applications Protect bearings or gears: oil separators, fuel systems, pumps, compressors and presses <BR/>Electronics or machinery: heat exchangers, semiconductor manufacturing equipment, induction furnaces and radio transmitters<BR/>Process systems: water filtration and reverse osmosis, chlorinates, de-icers, sterilisers and evaporators Certifications IP65 rated

Solid State Electro-Optic Level Sensors Can be mounted in any position as either a high or low level alarm<BR/>Wet or dry sinking models available (N/O or N/C). Wet sinking switches on the presence of liquid, dry on the absence<BR/>Open collector output <BR/>Non ESD sensitive<BR/>Polysulfone wetted parts<BR/>Flange mount via 19mm hole or Flush mount (M12 x 1mm)<BR/>Flange-mount versions with Viton seal are suitable for thin-walled tanks, etc<BR/>Electrical connection via leadwire 22 awg PVC 0.3m

Solid State Electro-Optic Level Sensors Can be mounted in any position as either a high or low level alarm<BR/>Wet or dry sinking models available (N/O or N/C). Wet sinking switches on the presence of liquid, dry on the absence<BR/>Open collector output <BR/>Non ESD sensitive<BR/>Polysulfone wetted parts<BR/>Flange mount via 19mm hole or Flush mount (M12 x 1mm)<BR/>Flange-mount versions with Viton seal are suitable for thin-walled tanks, etc<BR/>Electrical connection via leadwire 22 awg PVC 0.3m