Greenlee Hole Punches - D Connector High quality punches for D connector cut-outs Fast accurate panel punching<BR/>Capacity up to 1.6mm mild steel<BR/>Ball bearing draw stud to minimise working force required<BR/>For hydraulic operation with punch driver stock no. <a href="/web/p/products/3630632">363-0632</a> use adaptor stock no. <a href="/web/p/products/4780615">478-0615</a>

D Connector Cutters Hole cutters suitable for use on mild steel (28 tons/in² uts max) up to 1.6 mm (16 swg) and aluminium up to 2mm (14 swg). Long life punches. Minimum burr, distortion or surface damage. Easy to dismantle - slugs drop freely out of die. Can be used with the hydraulic pump/cylinder Stock no 605-223. Not suitable for the lever presses. Includes drilling jig for mounting holes<BR/>Pilot hole 8mm<BR/>M8 ball race supplied

Greenlee Drill/Tap Kit Set The Greenlee steel Drill/Tap kit set does complete hole drilling, tapping and deburring/countersinking in one operation with power drill which saves labour and time. It is made from hardened high-speed steel and carbon steel for longer life. The kit consists of combi bit set in plastic case M3 to M10 for use with mild steel, non-ferrous metals and plastics. Features and Benefits • Back tapered beyond tap to prevent thread damage from over-drilling<BR/>• Deburr/countersink provided on bit beyond back taper<BR/>• Designed to tap up to a 10-gauge metal<BR/>• High-quality hex shank to ensure a strong connection to drill chuck<BR/>• Quick change adaptor included in both metric and standard kits

Heavy Duty Hole Punch Will punch up to 3.5mm in mild and stainless steel, fibreglass/plastics<BR/>Split slugs fall free and cannot cling to draw stud<BR/>Greatly increased life expectancy compared to standard punches<BR/>Available in 16 sizes including Pg and ISO sizes<BR/>Use size 1 draw bolt for punches up to 25.4mm<BR/>Use size 2 draw bolt for punches up to 28.3mm and greater

Heavy Duty Hole Punch Will punch up to 3.5mm in mild and stainless steel, fibreglass/plastics<BR/>Split slugs fall free and cannot cling to draw stud<BR/>Greatly increased life expectancy compared to standard punches<BR/>Available in 16 sizes including Pg and ISO sizes<BR/>Use size 1 draw bolt for punches up to 25.4mm<BR/>Use size 2 draw bolt for punches up to 28.3mm and greater

Greenlee Hydraulic Draw Stud The Greenlee hydraulic draw stud is suitable for punch up to 3.5mm in mild steel and stainless steel bolt. The split slugs can easily fall free and cannot cling to draw stud. It greatly increases the life expectancy, as compared to the standard punches. It is recommended to use size 1 draw bolt for punches up to 25.4mm and size 2 draw bolt for punches up to 28.3mm and greater.<BR/>Note:<BR/>Use with hydraulic drivers only. Features and Benefits Stud is used for longer life of punches Applications Fibreglass/plastics<BR/>Punch up to 3.5mm mild steel

Heavy Duty Hole Punch Will punch up to 3.5mm in mild and stainless steel, fibreglass/plastics<BR/>Split slugs fall free and cannot cling to draw stud<BR/>Greatly increased life expectancy compared to standard punches<BR/>Available in 16 sizes including Pg and ISO sizes<BR/>Use size 1 draw bolt for punches up to 25.4mm<BR/>Use size 2 draw bolt for punches up to 28.3mm and greater

Greenlee Hole Punch The Greenlee hole punch is a heavy-duty tool used for circular cut-outs of size 32.5mm.<BR/>Note:<BR/>Use with hydraulic drivers only. Features and Benefits Available in 16 sizes including Pg and ISO sizes<BR/>Greatly increased life expectancy compared to standard punches<BR/>Split slugs fall free and cannot cling to draw stud<BR/>Use size 1 draw bolt for punches up to 25.4mm<BR/>Use size 2 draw bolt for punches up to 28.3mm and greater<BR/>Will punch up to 3.5mm in mild and stainless steel, fibreglass/plastics

Heavy Duty Hole Punch Will punch up to 3.5mm in mild and stainless steel, fibreglass/plastics<BR/>Split slugs fall free and cannot cling to draw stud<BR/>Greatly increased life expectancy compared to standard punches<BR/>Available in 16 sizes including Pg and ISO sizes<BR/>Use size 1 draw bolt for punches up to 25.4mm<BR/>Use size 2 draw bolt for punches up to 28.3mm and greater

Greenlee Hole Punch The Greenlee hole punch is a heavy-duty tool used for circular cut-outs of size 40.5mm.<BR/>Note:<BR/>Use with hydraulic drivers only. Features and Benefits Available in 16 sizes including Pg and ISO sizes<BR/>Greatly increased life expectancy compared to standard punches<BR/>Split slugs fall free and cannot cling to draw stud<BR/>Use size 1 draw bolt for punches up to 25.4mm<BR/>Use size 2 draw bolt for punches up to 28.3mm and greater<BR/>Will punch up to 3.5mm in mild and stainless steel, fibreglass/plastics

Heavy Duty Hole Punch Will punch up to 3.5mm in mild and stainless steel, fibreglass/plastics<BR/>Split slugs fall free and cannot cling to draw stud<BR/>Greatly increased life expectancy compared to standard punches<BR/>Available in 16 sizes including Pg and ISO sizes<BR/>Use size 1 draw bolt for punches up to 25.4mm<BR/>Use size 2 draw bolt for punches up to 28.3mm and greater

Heavy Duty Hole Punch Will punch up to 3.5mm in mild and stainless steel, fibreglass/plastics<BR/>Split slugs fall free and cannot cling to draw stud<BR/>Greatly increased life expectancy compared to standard punches<BR/>Available in 16 sizes including Pg and ISO sizes<BR/>Use size 1 draw bolt for punches up to 25.4mm<BR/>Use size 2 draw bolt for punches up to 28.3mm and greater