<B>Hammond Series RP General Purpose Enclosure, 186 x 146 x 110 mm, IP65 - RP1385C</B> This general purpose enclosure by Hammond is designed to provide a durable and secure housing for a variety of electronic components. With its ABS light grey body material and IP65 rating, it ensures protection against dust and water ingress. The clear lid allows for easy visibility of the enclosed components. The dimensions of the enclosure are specifically tailored to accommodate a range of applications, making it a versatile solution for various industries. <B>Features & Benefits</B> • Made of ABS material for durability and strength<BR/>• Light grey colour for a professional appearance<BR/>• IP65 rating for protection against dust and water<BR/>• Clear lid for easy visibility of components<BR/>• RP series designation for high-quality standards <B>Applications</B> • Ideal for housing electrical components in outdoor environments <B>Can it withstand outdoor conditions?</B> This enclosure is designed with an IP65 rating, making it suitable for outdoor use. <B>Will it provide adequate protection for sensitive electronics?</B> The ABS material and clear lid offer robust protection for electronic components. <B>Is it easy to install additional components inside the enclosure?</B> The enclosure features mounting holes and a secure lid for easy installation of components. <B>Can it be customised for specific applications?</B> The enclosure can be factory modified for specific requirements. <B>How durable is the enclosure in high-traffic environments?</B> The ABS material and sturdy construction make this enclosure a reliable choice for high-traffic areas.

<B>Hammond Instrument Case, 158.65 (L) x 160.35 (W) x 85.2mm (H), Tongue-and-Groove Construction, Aluminium Panels - 1598 Series - 1598EBK</B> Keep your electronics safe as houses with this instrument case from Hammond. It's a handy device that lets you securely mount printed circuit boards and protect them from contamination and environmental hazards. As it's built from flame-retardant ABS, this unit won't ignite in the event of a fire. An IP54 rating means it's protected from dust and splashes of water, so it stands up to harsh environments. As the case lets you mount both horizontal and vertical PCBs, it's a versatile choice. <B>Features & Benefits</B> • Aluminium panels protect against impact damage so it's reliable over long periods<BR/>• Moulded PCB standoffs keep your component secure<BR/>• Machine screws reliably hold the enclosure halves together<BR/>• Brass bushing protect screw-holes from repeated fastening and unfastening<BR/>• Vertical PC board guides make installation a breeze <B>Applications</B> • Consumer electronics<BR/>• Telecommunications equipment<BR/>• Medical devices<BR/>• Renewable energy systems <B>What's included with this instrument case?</B> The case is supplied with the top and bottom cover, aluminium front and end panels and two cover screws, so you have everything you need to get set up. Four rubber feet are included to prevent slippage and marking if you choose to install the box on a desk or shelf.

<B>Hammond Enclosure, 120 (L) x 95 (W) x 57mm (H), Die-Cast Aluminium Construction, IP54 Rating - Eddystone Series - 26908PSLA</B> Don't let dust and other airborne contaminants get the better of your electrical instruments – shut them up in this enclosure from Hammond. For safety, the box comes supplied with a tight-fitting lid to prevent unauthorised access to its contents. The unit's quick to install in your system thanks to its pre-drilled screw holes. A die-cast aluminium body shrugs off impact and corrosion, so it fits the bill for use in harsh environments. Lap-joint construction gives you reliable protection from electromagnetic interference to ensure clear, noiseless signal transmission. <B>Features & Benefits</B> • Low side wall draft angle of 2° or less for easy mounting of printed circuit boards<BR/>• IP54 rating indicates that it's protected against limited amounts of dust and water splashes from all directions<BR/>• Light weight of 300g won't put strain on your wall, shelf or panel <B>Applications</B> • Electronics industry<BR/>• Automotive manufacture<BR/>• Chemical laboratories <B>Does this enclosure come with cover screws?</B> Yes, this unit comes supplied with four M3.5 cover screws that fit into countersunk holes to ensure a snag-free finish.

<B>Hammond Desktop Enclosure, 150 (L) x 220 (W) x 100mm (H), Aluminium and Steel Construction, Powder Paint Finish - 519 Series - 519-0910</B> On the lookout for a sloped console for critical electrical equipment? Choose this handy desktop enclosure from Hammond. Its construction from 18-gauge mild steel and aluminium makes it hardwearing, so it's a safe bet when you need a protective enclosure to shield small units such as control modules or power supplies from environmental hazards. These materials are also easy to machine, letting you cut access holes in the top panel so you can reach device controls easily. Vertical cut-outs on both sides of the unit support effective ventilation, which helps ensure your stored gadgets don't run the risk of overheating. <B>Features & Benefits</B> • Comes with four self-tapping screws to make securing the enclosure and lid a cinch<BR/>• Four self-adhesive rubber feet stop the unit from slipping or marking surfaces <B>Applications</B> • Research and development labs<BR/>• Factories<BR/>• Warehouses and distribution centres <B>What's the benefit of this product's power paint finish?</B> A powder paint coating adds impressive robustness, giving the component resistance to chipping, fading and scratching, so it's a tough nut for use in demanding industrial settings.

<B>Hammond Instrument Case, 180 (L) x 93 (W) x 74mm (H), Steel Construction, IP30 Rating - 511 Series - 511-0900</B> Keep delicate electronic devices safe in tough industrial settings with this instrument case from Hammond. It's made from robust 18-gauge steel that protects equipment from damage caused by impact and contaminants. The box consists of two parts that simply screw together, so it's easy to assemble and dismantle. You can reverse the case to choose between sloping or vertical sides to suit your needs. Thanks to its grippy rubber feet, this unit stays steady even in vibrating settings or on slippery surfaces. <B>Features & Benefits</B> • Light 634g weight means it's easy to handle<BR/>• Comes pre-assembled so you can use it straight away<BR/>• IP30 rating means it's protected against tools and wires larger than 2.5mm in diameter <B>Applications</B> • Machine controls<BR/>• Measuring instruments<BR/>• Warehouses and self-storage facilities <B>Does this unit have any cooling features?</B> Yes, it has ventilation louvres to promote natural cooling via air flow. This prevents overheating and keeps equipment performing smoothly. <B>What size is the box?</B> This instrument case has compact dimensions of 180 (L) x 93 (W) x 74mm (H) so it's a space-efficient choice.

<B>Hammond Enclosure, 191 (L) x 110 (W) x </B><B>61mm (H)</B><B>, Wall Mounting, Screw-On Lid - 1591 Series - 1591ESFLBK</B> Pull the covers over your board-mounted setup with this enclosure from Hammond. With dimensions of 191 (L) x 110 (W) x 61mm (H), it's a versatile option with space for plenty of control kit. As it's IP54-rated, you can trust the container shuts out dust and water splashes to keep devices safe from corrosion. Thanks to its handy mounting flanges, fixing the box to a wall is no trouble. Built-in wall guides on the inside make it easy to slot a PCB into place, letting you speed through set-up. <B>Features & Benefits</B> • Screw-down lid can be quickly removed and replaced when you need access to devices<BR/>• Made from robust ABS, so brushes off impacts and cuts the risk of component damage<BR/>• Holds 1.5mm PC cards for convenient network connectivity<BR/>• Self-tapping screws remove the need to drill holes, making assembly speedy <B>Applications</B> • Security systems<BR/>• Retail units<BR/>• Automotive industry <B>Can I make my own knockouts on this enclosure?</B> Yes, you can. This container doesn't come with pre-made knockouts, so you can add wiring entry holes to meet your system's needs.

<B>Hammond Enclosure, 53 (L) x 38 (W) x 31mm (H), Die-Cast Aluminium Construction, IP54 Rating - Eddystone Series - 11451PSLA</B> Shore up critical equipment with this compact enclosure from Hammond. It's made from hardwearing aluminium alloy that's die-cast and lap-jointed for additional protection and shielding. This gives you peace of mind that the box is strong, corrosion-resistant and well-sealed. It also ensures electronic instruments are safe from harsh conditions, impacts and tampering. The conductive material acts as a shield to boost EMC performance around sensors and communication devices. As sides have a low draft angle, wall tapering won't get in the way of panel and PCB mounting. <B>Features & Benefits</B> • Screws keep the lid secure around machine vibrations and in publicly accessible places<BR/>• Countersunk screws and pre-drilled holes provide a flush finish and enable speedy mounting<BR/>• IP54 rating indicates protection against dust and water splashes<BR/>• Light weight of 60g means less effort during assembly and minimal strain on installations <B>Applications</B> • Machine assembly<BR/>• Sound stages<BR/>• Industrial automation<BR/>• Research laboratories <B>What tools do I need to screw the enclosure lid down?</B> All you need to grab is a Pozidriv screwdriver with a size 2 head and you'll have it fixed down in no time.

<B>Hammond Enclosure, 119 (L) x 94 (W) x 34mm (H), 2.1mm Wall Thickness - Eddystone Series - 29830PSLA</B> Get all your PCBs in a row by storing them in this shielded enclosure from Hammond. It safely holds multiple PC cards and prevents them from shuffling about when not in use. The die-cast aluminium alloy housing resists wear and tear caused by bumps and abrasion. As this metal's easy to machine, customising the box to suit your setup is straightforward. Lap-joint construction and an IP54 rating assure you that dust and water splashes can't get inside. <B>Features & Benefits</B> • Countersunk holes keep screws flush with the lid to cut snagging out of the picture<BR/>• Light weight of 240g makes it easy to handle and minimises surface strain<BR/>• Natural finish won't scratch or wear down, making it a low-maintenance option <B>Applications</B> • Server centres<BR/>• Telecommunications networks<BR/>• IT hubs <B>What's the biggest PCB I can fit into this enclosure?</B> You can fit standard PC boards with maximum dimensions of 111.12 (L) x 85.62mm (W) into this enclosure. <B>Is this enclosure shielded?</B> Yes, its die-cast aluminium construction prevents EMI and RFI from getting through. These signals could otherwise disrupt circuits, especially live connections, and muddle signals.

<B>Hammond Enclosure, 113 (L) x 60 (W) x 31mm (H), Lap-Joint Construction, With Lid Screws - 1590 Series - 1590B</B> Pop your sensitive electronic devices into this enclosure from Hammond to safeguard them against everyday wear and tear. Thanks to robust die-cast aluminium construction, it's a sturdy choice for protecting circuit boards and small instruments from accidental knocks and bumps in harsh industrial locations. Thanks to its lap-joint construction, which ensures a gap-free fit between the box and the lid, you can rest assured your equipment is protected against dust and water splashes. As this enclosure is easy to machine, customising it to suit your needs is hassle-free. <B>Features & Benefits</B> • Smooth vibra finish with no sharp edges that could cause snagging hazards<BR/>• Low side wall draft angle means circuit boards slot in snugly<BR/>• Factory-tapped holes for quick and simple screw insertion<BR/>• Resists corrosion, so it's compatible with humid settings<BR/>• Comes with screws to fit its cover securely in place <B>Applications</B> • Factory automation<BR/>• Data centres<BR/>• Food and beverage industries<BR/>• Power generation <B>Is this enclosure shielded?</B> Yes, the box is shielded to safeguard against EMI and minimise the chance of crosstalk with nearby electronic devices.

<B>Hammond Enclosure, 121 (L) x 66 (W) x 40mm (H), With Lid and Fixing Screws, Shielded - 1590 Series - 1590N1 </B> Got a lot to lose if your equipment gets damaged? Keep it safe and snug in this enclosure from Hammond. The unit's suitable for housing sensitive electronic instruments and circuit boards, such as those used in automated industrial settings. To keep your device running in fine form, the box's lap-joint construction stops contaminants, dust and water splashes from creeping inside. It's also shielded, to cut down on the risk of disruptive EMI from nearby electronic components. You can conveniently mount the box on a wall in a spot that gives you easy access to the contents. <B>Features & Benefits</B> • Drilled and tapped holes with simple screw insertion<BR/>• Vibra-finished for a smooth snag-free surface<BR/>• Long-lasting die-cast aluminium construction<BR/>• Screws match the colour of the enclosure for a seamless finish <B>Applications</B> • Medical and pharmaceutical industries<BR/>• Industrial automation<BR/>• Power generation plants<BR/>• Breweries <B>Does this enclosure come with a lid?</B> Yes, you get a lid with the box as well as four cover-fixing screws. This means you can put it to use straight away.

<B>Hammond Enclosure, 275 (L) x 175 (W) x 71mm (H), Die-Cast Aluminium Construction, IP54 Rating - 1550 Series - 1550JBK</B> Let this enclosure from Hammond guard your electronic equipment. Thanks to aluminium alloy material and a polyester powder paint coating, you can be sure it's durable and corrosion-resistant. It's die-cast, so there are no soldered or riveted joints that could be weak points. This ensures the box is strong enough to handle bumps and rough handling. Pre-tapped holes and Philips-head screws give you a secure way to fix the lid using a standard screwdriver. Thanks to the lid's lap-joint design and IP54 rating, your devices are covered against water splashes and dust. The strongly sealed construction boosts EMI and RFI shielding, helping industrial instrumentation to stay reliable. <B>Features & Benefits</B> • Rounded edges mean you won't get into scrapes installing your equipment<BR/>• Wall draft angle is no more than 2°, so PCBs have no trouble fitting in<BR/>• Possible to upgrade protection to IP66 with a foam gasket (253-9487) or IP67 with the silicone version (253-9488) <B>Applications</B> • Research laboratories<BR/>• Transport industry<BR/>• Assembly lines<BR/>• Machine building <B>Can I use Torx screws on the lid?</B> Yes. Using M3.5 Torx screws (253-9499) on the lid improves the tamper-resistance of this enclosure.

<B>Watertight Thick Wall Diecast Aluminium Enclosure, IP66</B> Hammond Manufacturing 1590X Diecast Aluminum Enclosures are rugged and easy to machine electronic instrument enclosures.These enclosures provide low wide wall draft angles (2 degrees or less) for easy mounting of printed circuit board. 1590X are lap joint constructed to provide protection against access of dust and splashing water, as well as improved EMI/RFI shielding. These enclosures provide the unpainted version in vibra finish to assure no sharp edges. The satin black version is painted with tough polyester powder paint for a lasting finish, even after machining. 1590X enclosures are available with four (4) 6-32 x 1/2" machine screws to secure the lid into factory tapped holes <B>Features and Benefits</B> • Rugged, diecast aluminium alloy (tough yet easy to machine), electronic instrument enclosure<BR/>• Two piece tongue & groove construction with a one piece neoprene gasket provides protection against dust and water<BR/>• Ideal for repetitive opening and closing<BR/>• Four recessed stainless steel machine screws secure lid into factory tapped holes<BR/>• Easy to wall mount using 'through box - blind hole' construction, outside of gasket protection<BR/>• Lid screws are self captivating (lid holes are threaded with the first installation of lid screws)<BR/>• Designed to meet IP66 <B>FAQ:</B> What does IP rating means? The IP rating is used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies (tools, dirt etc) and moisture. For more information please, visit SOLUTIONS section at the top of the page or click on Selection Guide of an Enclosures. What is supplied? • An enclosure with a lid • Color matched screws