<B>Hoyles Pull Cord Disabled Person Alarm Kit</B> Introducing the mains powered Hoyle Pull Cord Disabled Person Alarm. This fantastic alarm system is a hugely important addition to anyone&#146;s home that requires additional peace of mind when immediate or emergency assistance could be required. This alarm system is able to generate an audible and visual alarm when the cord is pulled and features a battery operated standby system even when the mains power fails, making it a failsafe solution for anyone&#146;s home if they are vulnerable, disable or elderly, as well as giving reassurance for family members and caregivers. <B>Features and Benefits:</B> • The alarm unit is fully DDA and BS8300 compliant and is powered by mains and also has standby batteries included in case of loss of power, providing additional reassurance<BR/>• The unit also features four selectable warning tones along with audible and visual signalling when the alarm is activated with the ceiling pull cord<BR/>• Additionally, the system also has a controller with high power Piezo Sounder as well as an Overdoor Audible Visual Indication<BR/>• Included is a Pull Cord Instruction Label with Braille<BR/>• The reset button has an LED, Sounder and Braille instructions<BR/>• The unit has a relay output and optional call buttons for further flexible use <B>Applications:</B> A personal alarm is a device that can be activated in a variety of ways to set off a signal to alert a family member, caregiver or the emergency services that there may be a reason for distress and requirement for immediate assistance. Personal alarms can be portable alarms that are carried on your person as a necklace or on the wrist and can send a distress signal at the touch of a button, while others can be fitted in the home and can be activated by pulling a cord or pressing an alarm button to sound an audible warning or send a distress signal for immediate help. Some alarm units have the ability to also call emergency contacts, like carers or neighbours as well as sounding an alarm, which is especially useful. They are essential items to have for disabled individuals and elderly and vulnerable people to know they are safe in their own homes. <B>Is this unit easy to install?</B> The system is easy to set up and simple enough to be installed by someone that has some experience with installing electrical equipment or working with electrical wiring. It is not critical that an electrician installs this unit, however it is recommended if you have little to no experience in electrical wiring and installation.

GX32 Fire Alarm System The GX32 fire alarm system is the most advanced of its type available. It uses PIC microprocessor technology in both the control panel and in each call point. The GX32 is designed in such a way that even if the cables are cut or short circuited in several places the system will continue to function. Each call point is individually battery powered and contains its own high power piezo sounder. A unique trace mode enables cable faults and battery problems to be pinpointed at the throw of a key.<BR/><B>Installation Considerations.</B><BR/>BS5839 recommends that manual call points should be located on exit routes and in particular on floor landings of stairways and at exits to the open air. They should be so located that, to give an alarm, no person in the premises need travel more than 30 metres.<BR/>BS5839 recommends a minimum sound level of either 65db(A) or 5db(A) above any other noise likely to persist for longer than 30 seconds should be produced by the sounders in all accessible parts of the building.<BR/>GX32 system sounders give a sound level of at least 100db(A) at 1 metre to ensure that almost 70db(A) is available at 30m distance to meet the above dual recommendations. GEMINI fire alarms are the ideal choice for fire alarms in small buildings and temporary accommodation etc... Up to 32 Callpoint/Sounder units can be connected to the control Integral Call Point, Battery and Sounder<BR/>Battery Fault Monitor<BR/>Keyswitch to Silence & Restart Alarm<BR/>Twin LED Fire Indication<BR/>LED Fault Indication<BR/>Simple to install<BR/>System Healthy LED<BR/>Smoke Alarm Option<BR/>Robust Construction<BR/>Fault Trace Facility<BR/>Two wire connection

Lone Worker Safety System The MAYDAY LONEWORKER safety system is designed to raise an alarm if a lone worker becomes incapacitated. Once the Mayday is armed, the primary countdown timer 20 - 60 minutes is started and indication is given by countdown LED's. At the end of the primary period the secondary timer 2 - 10 minutes starts and an audible and visual warning is given to prompt the lone worker to acknowledge there presence by pressing the OK button. As the timer approaches time out, the indications become more urgent. If the lone worker fails to respond the Mayday signals for assistance. On Off keyswitch to arm the unit and secure reset<BR/>OK button to restart the countdown timer and reset the alarm<BR/>A green Power On LED<BR/>Four red System Active countdown LED's<BR/>An integral piezo sounder. (100db at 1m)<BR/>Two adjustable countdown timer controls

Gemini Standalone Fire Alarm The battery-powered Gemini GX20e is a manual, high-powered fire alarm with piezo-electric sounder suitable for small buildings. Up to four units may be linked together. Integral call point, battery and sounder<BR/>Battery fault monitor<BR/>Keyswitch to silence and restart alarm<BR/>Twin LED fire indication<BR/>LED fault indication<BR/>Simple to install<BR/>Robust steel construction

DorWatcher Door Alarm (Mains) DorWatcher is an alarm unit used to prevent doors being left open for extended periods of time. The alarm is activated if the door remains open for more than 1 minute prompting people in the vicinity to close the door. Once activated the alarm is automatically reset as soon as the door is closed.. Robust ABS plastic enclosure<BR/>Tamper switch activates if cover is removed<BR/>Clear instructions displayed on the unit<BR/>Adjustable time delays<BR/>Powered by 240Vac mains<BR/>Simple installation<BR/>Surface-mount contact with 1m of pre-wired cable, cable clips and fixings

Stop n Search TAG2 The TAG 2 can be wall or desk mounted. It has a heavy duty button that can be extended to a remote point if necessary. Stop n Search can be used on leaving or entering premises where staff pilfering is suspected or the carrying of weapons or drugs may be a problem. The selection frequency is set up on installation but can be changed to suit changing circumstances. The selection frequency can be set as 2, 5, 10, 20, 30, 50, 70 or 90 percent. If for example a selection frequency of 30% is used then 30 in 100 people would be selected randomly. It is impossible to control the randomness or create a guessable pattern. The software generates a selection if the button is permanently pressed in order to deter users from trying to disable the system. A facility is incorporated to allow a no search condition if staff are not available to conduct a search but still give the impression that the random search regime is in use. Stop n Search is invaluable to management and provides reassurance that if you are subjected to a search regime it is at least carried out randomly and that no one is being singled out for special treatment. The battery powered TAG2 is supplied with 3 x AA alkaline batteries with a life in excess of 2 years dependant upon use. Audible bleep and LED indicator<BR/>Remote indication option<BR/>Adjustable selection frequency<BR/>Touch button or remote input

Door Interlock Controller The door interlock controller enables door access to be controlled to and from secure areas. Two 1A/30Vdc relays are provided, offering status indication and breached indication. Breached conditions include power loss, door open too long (DOTL) and forced entry. Door release is via a pushbutton on the controller, but may also be activated through remote pushbutton, keypad, biometric switch, etc. The controller is ideal for use in control rooms, jewellery stores, banks and cash offices, and retail establishments, etc. Three modes of operation are available: Mode 1 - Standard door strikes/maglocks and door contacts for door status<BR/>Mode 2 - Monitored door strikes/maglocks and/or autromatic door openers<BR/>Mode 3 - Unsecured door mode for hands-free unsupervised operation The door lock offers the following: Interlocking for 2 doors<BR/>Status indication<BR/>Supervised and unsupervised modes<BR/>Breach/fault relay<BR/>20 to 60s door open too long (DOTL) time<BR/>0 to 20s dwell time

DorWatcher Door Alarm DorWatcher is an alarm unit used to prevent doors being left open for extended periods of time. The alarm is activated if the door remains open for more than 1 minute prompting people in the vicinity to close the door. Once activated the alarm is automatically reset as soon as the door is closed Robust ABS plastic enclosure<BR/>Tamper switch activates if cover is removed<BR/>Clear instructions displayed on the unit<BR/>Adjustable time delays<BR/>Battery Powered<BR/>Simple installation<BR/>Surface-mount contact with 1m of pre-wired cable, cable clips and fixings

Exitguard Door Monitor Alarm System Exitguard 24 hour door alarm. Ideal for protecting fire exit doors in supermarkets, hotels, warehouses, leisure centres and all types of public buildings. An integral high power sounder is activated when the door is opened. High output sounder<BR/>Nine digit keypad for both control and programming<BR/>Adjustable auto reset and re-arm 0s-88s<BR/>Adjustable door open delay 0-88min 58secs<BR/>Tamper switch<BR/>Fire door checker<BR/>Selectable alarm tone<BR/>Low battery indicator

Exitguard Door Alarm System Mains Powered Exitguard is the ideal solution for security of fire exit doors. An integral high power sounder is activated when the door is opened to warn those in the vicinity that security has been breached.<BR/>EX206 is 240vac mains powered - Use where the protected door may be opened frequently or the sounder may need to sound for long periods. There is a logic output signal, a volt free relay contact for alarm condition. This version is also supplied with 6 x AA alkaline batteries for standby. The batteries will not power the alarm relay Supply Voltage: 220/240Vac<BR/>Supply input current: < 0.5A<BR/>Battery: 6xAA Alkaline (Supplied)<BR/>Visual Indication: 1 x power LED Green<BR/>Auto reset / re-arm delays 0 - 88s<BR/>Optional door open too long delay 0-88mins<BR/>Front and back acting tamper switch<BR/>Six selectable alarm tones<BR/>Battery Condition Monitor<BR/>Battery, 12 Vdc and mains versions<BR/>Alarm strobe for visual alarm indication<BR/>Bleep in off option<BR/>High power piezo sounder<BR/>Fire door checker<BR/>Separate tamper tone<BR/>Visual alarm indication<BR/>Chime facility<BR/>Alarm relay output<BR/>Manager code<BR/>Quick reset/pass and return

Keyguard Emergency Access Key Box The Keyguard range includes snap-off plastic windows to release keys with or without battery powered inbuilt alarm. Other Keyguard options include volt-free contacts for specialist applications. Key cases are made of plastic without glass<BR/>Snatch off plastic window<BR/>Can be wired into existing alarm systems<BR/>Stores both keys and cards<BR/>Ideal for restricted access areas<BR/>The Keyguard plastic window enables it to be used in such areas as schools, food preparation areas and swimming pools Standard Key Box (RS <a href="/web/p/products/4070457">407-0457</a>, RS <a href="/web/p/products/4070463">407-0463</a>) The standard version with no alarm or switch Alarmed Key Box (RS <a href="/web/p/products/4070485">407-0485</a>, <a href="/web/p/products/4070479">407-0479</a>) With an integral audible alarm powered from a PP3 Alkaline battery (supplied)<BR/>If any attempt is made to remove the plastic window then the alarm is sounded<BR/>The alarm can only be silenced by fitting a new window Key Box with switch (RS <a href="/web/p/products/4070508">407-0508</a>) The Key guard K1020 are fitted with a single pole changeover contact microswitch (10 A / 240 V ac)<BR/>This switch is terminated and is voltage free for connection to users own equipment. <BR/>Should only be used at low voltage (12 V dc) Keyguard Windows (RS <a href="/web/p/products/4070514">407-0514</a>) Replacement windows for Keyguard emergency access key box

Keyguard Emergency Access Key Box The Keyguard range includes snap-off plastic windows to release keys with or without battery powered inbuilt alarm. Other Keyguard options include volt-free contacts for specialist applications. Key cases are made of plastic without glass<BR/>Snatch off plastic window<BR/>Can be wired into existing alarm systems<BR/>Stores both keys and cards<BR/>Ideal for restricted access areas<BR/>The Keyguard plastic window enables it to be used in such areas as schools, food preparation areas and swimming pools Standard Key Box (RS <a href="/web/p/products/4070457">407-0457</a>, RS <a href="/web/p/products/4070463">407-0463</a>) The standard version with no alarm or switch Alarmed Key Box (RS <a href="/web/p/products/4070485">407-0485</a>, <a href="/web/p/products/4070479">407-0479</a>) With an integral audible alarm powered from a PP3 Alkaline battery (supplied)<BR/>If any attempt is made to remove the plastic window then the alarm is sounded<BR/>The alarm can only be silenced by fitting a new window Key Box with switch (RS <a href="/web/p/products/4070508">407-0508</a>) The Key guard K1020 are fitted with a single pole changeover contact microswitch (10 A / 240 V ac)<BR/>This switch is terminated and is voltage free for connection to users own equipment. <BR/>Should only be used at low voltage (12 V dc) Keyguard Windows (RS <a href="/web/p/products/4070514">407-0514</a>) Replacement windows for Keyguard emergency access key box