Liquid Silicone Release Agent Silicone release agent prevents Devcon&#146;s products from sticking to patterns or moulds<BR/>Ensures a high gloss finish on cast Devcon resin surfaces<BR/>For use only on solid or sealed surfaces. If the master is plaster, wood or other porous material, seal it before applying Devcon Release Agent

Zip Patch™ Repair Kit Easy to use waterproof adhesive patching kit <BR/>Produces permanent waterproof &#146;field&#146; repairs<BR/>Hardens in minutes at room temperatures<BR/>Tough and durable finish<BR/>Bonds to all common substrates<BR/>Patch size 10.2cm x 22.9cm (4in. x 9in.)<BR/>Shore hardness 75 Kit contains: Fine adhesive impregnated fibre glass patches, pump spray, plastic applicator and rubber gloves.

ITW Devcon Epoxy Adhesive The ITW 500g Devcon epoxy adhesive is a versatile, durable, two-part epoxy compound for maintenance and repair of a broad range of equipment. It provides non-rusting surfaces repairs and rebuilds worn shafts, pumps and impellers. Features and Benefits Maximum operating temperature of 177°C<BR/>Pot life 21mins<BR/>Mix ratio of 4.3:1<BR/>Cured repairs can be drilled, tapped, machined, or painted <BR/>Long-life protection against abrasion, corrosion, and chemicals<BR/>Abrasion and chemical resistant Certifications ANSI/ESD S20.20:2014<BR/>BS EN 61340-5-1:2007

Aluminium Liquid Aluminium filled pourable epoxy liquid <BR/>Cost effective moulds, patterns and fixings<BR/>Excellent non shrink behaviour<BR/>Reproduces fine details<BR/>Dry Service Temperature (Max °C) 121°C<BR/>Pot Life 75mins<BR/>Mix ratio (by Weight):9:1

Wear Resistant Liquid Ceramic filled epoxy liquid for castings where exceptional durability is required<BR/>Low friction with outstanding wear resistance<BR/>Non shrink for accurate reproduction of critical details<BR/>Dry Service Temperature (Max °C) 121°C<BR/>Pot Life 60mins<BR/>Mix ratio (by Weight):9:1

Flexane® Primers Primer required for optimum bonding of all Flexane urethanes<BR/>Use with all Flexanes, putty, brushable, 94, 80 and 60 liquid<BR/>Each primer container covers approximately 1 square metre

Flexane® Putty For a broad range of lining and protection applications<BR/>Easily trowelled<BR/>Cures to a medium hard rubber<BR/>Bonds to most substrates<BR/>Maximum operating temp 82°C dry and 49°C wet<BR/>Pot life 25mins<BR/>Mix ratio 2.52:1

Flexane® Liquid Urethanes A tough pourable rubber compound for part encapsulation, rugged flexible moulds and patterns, holding fixtures and forming die pads. Available in three grades to cover a variety of applications with different flexibility requirementsGood abrasion and wear resistanceSelf levellingCan be used for part encapsulation, moulds and patterns, equipment linings, holding fixtures and forming die pads.Flexane 60 High flexibilityFlexane 80 Medium flexibilityFlexane 94 Low flexibility

ITW Devcon, Urethane Liquid The ITW Devcon urethane liquid is a 500g, tough pourable rubber compound for part encapsulation, rugged flexible moulds and patterns, holding fixtures and forming die pads and comes with Flexane curing agent. It can also be used to form equipment linings that are abrasion-resistant and noise reducing. This is also used for part encapsulation, moulds and patterns, equipment linings, holding fixtures and forming die pads.<BR/>Filled Epoxies:<BR/>Versatile durable two-part epoxy compounds for maintenance and repair of a broad range of equipment. Cured repairs can be drilled, tapped, machined or painted which has long-life protection against abrasion, corrosion and chemicals. Features and Benefits Cure time is 16 hours<BR/>Good abrasion and wear resistance<BR/>Low flexibility<BR/>Self levelling<BR/>Maximum operating temperature is +82°C Applications Casting flexible parts and moulds<BR/>Casting, corrosion protection<BR/>Lines process equipment to dampen noise <BR/>Noise dampening<BR/>Pads for press brake forming <BR/>Pouring concrete expansion joints<BR/>Protects equipment surfaces from wear and corrosion<BR/>Wear protection Certifications ANSI/ESD S20.20:2014<BR/>BS EN 61340-5-1:2007

Flexane® Liquid Urethanes A tough pourable rubber compound for part encapsulation, rugged flexible moulds and patterns, holding fixtures and forming die pads. Available in three grades to cover a variety of applications with different flexibility requirementsGood abrasion and wear resistanceSelf levellingCan be used for part encapsulation, moulds and patterns, equipment linings, holding fixtures and forming die pads.Flexane 60 High flexibilityFlexane 80 Medium flexibilityFlexane 94 Low flexibility

Flexane® Primers Primer required for optimum bonding of all Flexane urethanes<BR/>Use with all Flexanes, putty, brushable, 94, 80 and 60 liquid<BR/>Each primer container covers approximately 1 square metre