The JM CONCEPT BASELINE series are multi slot wired connected platforms equipped with golden double lyre contact and 1 terminal block on the high side and 1 terminal block on the low side. The case size of this product is 180 mm. Weight is 450 g

The JM CONCEPT TELIS 9000 is a universal input transmitter with quadruple galvanic isolation, 24-bit conversion for inputs and 16-bit conversion for outputs, and accurate cold junction compensation at ± 1°C for thermocouple inputs. It has a pilot function that makes it possible to act on the display value influencing the output independent of the input. It has blue backlit LCD display<BR/>Operating temperature range is -10°C to 60°C<BR/>IP20 rated polyamide housing<BR/>RS485 USB communication

The JM CONCEPT TELIS 9000 is a universal input transmitter with quadruple galvanic isolation, 24-bit conversion for inputs and 16-bit conversion for outputs, and accurate cold junction compensation at ± 1°C for thermocouple inputs. It has a pilot function that makes it possible to act on the display value influencing the output independent of the input. It has blue backlit LCD display<BR/>Operating temperature range is -10°C to 60°C<BR/>IP20 rated polyamide housing<BR/>RS485 USB communication

The JM CONCEPT digital indicator comes with two-colour display allowing analogue and digital transmission of various signals. The flush-mount housing (IP65 48mm x 96mm x 85) equipped with plug-in connectors and a USB socket on the back. It comes with 1 universal input and supports RS485 USB communication. Precision class 0,1<BR/>Input analogue / digital conversion 24 bits<BR/>Output analogue / digital conversion 16 bits<BR/>Thermal drift <25ppm<BR/>Maximum of consumption <11.3VA

The JM CONCEPT digital indicator comes with two-colour display and is dedicated to Strain-gauge measurements. The flush-mount housing (IP65 48mm x 96mm x 85mm) equipped with plug-in connectors and a USB socket on the back. It has 1 strain gauge input and 1 analogue output with 4 relay outputs. It supports RS485 USB communication. Precision class 0,1<BR/>Input analogue / digital conversion 24 bits<BR/>Output analogue / digital conversion 16 bits<BR/>Thermal drift <25ppm<BR/>Maximum of consumption <13.25VA

The JM CONCEPT digital indicator comes with two-colour display allowing analogue and digital transmission of various signals. The flush-mount housing (IP65 48mm x 96mm x 85) equipped with plug-in connectors and a USB socket on the back. It comes with 1 universal input and 1 isolated analogue output. It supports RS485 USB communication. Precision class 0,1<BR/>Input analogue / digital conversion 24 bits<BR/>Output analogue / digital conversion 16 bits<BR/>Thermal drift <25ppm<BR/>Maximum of consumption <11.3VA

The JM CONCEPT digital indicator comes with two-colour display allowing analogue and digital transmission of various signals. The flush-mount housing (IP65 48mm x 96mm x 85) equipped with plug-in connectors and a USB socket on the back. It comes with 1 universal input and 1 relay output. It supports RS485 USB communication. Precision class 0,1<BR/>Input analogue / digital conversion 24 bits<BR/>Output analogue / digital conversion 16 bits<BR/>Thermal drift <25ppm<BR/>Maximum of consumption <11.3VA

The JM Concept strain gauge indicator is a digital indicator with two colour display. This strain gauge indicator is dedicated to strain gauge measurements. It is guaranteed for 5 years Two colour digital and alphanumeric display<BR/>IP65 protection factor

The JM Concept powered loop isolator is specially designed to isolate 0 to 20 mA current. This Isolator is guaranteed for 5 years and having a one channel. Independent isolated outputs<BR/>IP20 protection factor<BR/>Response time is less than 100 micro sec<BR/>Thermal drift is less than 50 ppm

The JM Concept transmitter allows the isolation and transmission of a potentiometric signal. This transmitters outputs are independent of each other so the beginning and end of scale of each of the outputs are set independently. Independent isolated outputs<BR/>IP20 protection factor<BR/>Response time is less than 100 micro sec<BR/>Thermal drift is less than 50 ppm

The JM Concept universal input transmitter comes with quadruple galvanic isolation. This device offers 24 bit conversion for inputs and 16 bit conversion for outputs. This device is guaranteed for 5 years. Backlit LCD display<BR/>IP20 protection factor<BR/>5 line and 5 positions programming joystick<BR/>Blue colour

The JM Concept transmitter is a transmitter of process inputs, resistive inputs, PT100 2 wires or 2 analogue outputs. This device can hold up to 4 relays and a communication port RS485 Modbus RTU. It is guaranteed for 5 years. Backlit LCD display<BR/>IP20 protection factor<BR/>5 line and 5 positions programming joystick<BR/>Blue colour