Knightsbridge RD2 Tilt, Twist and Lock Downlight GU10/MR16 Knightsbridge RD2 tilt, twist and lock downlights are pre-wired with a 230 V, GU10 lampholder. An optional 12 V, MR16 lampholder is included. Features and Benefits Minimum void 100 mmCut out diameter 80 mmTilt angle 25 degreesDie cast aluminiumProtection to IP20

Knightsbridge RD1 Fixed Twist and Lock Downlight GU10/MR16 Features and Benefits Primary voltage 230 VMaximum wattage 50 WDie cast aluminium constructionProtection to IP20Diameter 79 mmOverall height 90 mmMinimum void 95 mmCut out diameter 70 mm

Knightsbridge Recessed Modular LED Fitting 600 x 600mm The Knightsbridge MRBLED features a 40W LED recessed modular light source is the ideal alternative to 4 x 18W modular fittings. The LED lighting technology is an energy efficient replacement with an A+ rating compared to traditional modular fittings. Virtually maintanance free with instant ignition and up 30000 lifetime hours. Features and Benefits • LED 40 W Modular recessed fitting • 600 x 600 mm fitment • Protection Rating: IP20 • Lumen Output: 3200 lm

Ultra Thin Linear LED Lighting These compact linear LED lighting strips have a flat slimline cross-section. They are suitable for use in home, office, under kitchen cabinets, shelves, display cases. They are easy to install (two metal mounting clips and screws included). These LED strips utilise high brightness surface mounted LED chips and are available in either cool or warm white light and run on low voltage (24 V) for safety and produce no RF interference and operate silently.LED strips can be linked (up to 36W per run) with connectors or cable (one cable and one linear connector is supplied with each LED strip). A right angled connector is available as an extra (see RS 719-3156). Power supply is required, a 36W 24V switching power adapter is available (see RS 739-3510).To further extend the LED striplight reach, use interconnect power leads (available separately) in a choice of lengths:739-3514 100mm739-3526 250mm739-3523 1000mm739-3520 2500mmAlso these LED strips are dimmable when used with dimmer (see RS 719-3168). This dimmer also has a memory function. To connect multiple LED strips in different arrangements an 8-way DC splitter is also available (see RS 719-3165).

ML Accessories 36W 24V Constant Voltage LED Driver

Knightsbridge RD1 Fixed Twist and Lock Downlight GU10/MR16 Features and Benefits Primary voltage 230 VMaximum wattage 50 WDie cast aluminium constructionProtection to IP20Diameter 79 mmOverall height 90 mmMinimum void 95 mmCut out diameter 70 mm

Ultra Thin Linear LED Lighting These compact linear LED lighting strips have a flat slimline cross-section. They are suitable for use in home, office, under kitchen cabinets, shelves, display cases. They are easy to install (two metal mounting clips and screws included). These LED strips utilise high brightness surface mounted LED chips and are available in either cool or warm white light and run on low voltage (24 V) for safety and produce no RF interference and operate silently.LED strips can be linked (up to 36W per run) with connectors or cable (one cable and one linear connector is supplied with each LED strip). A right angled connector is available as an extra (see RS 719-3156). Power supply is required, a 36W 24V switching power adapter is available (see RS 739-3510).To further extend the LED striplight reach, use interconnect power leads (available separately) in a choice of lengths:739-3514 100mm739-3526 250mm739-3523 1000mm739-3520 2500mmAlso these LED strips are dimmable when used with dimmer (see RS 719-3168). This dimmer also has a memory function. To connect multiple LED strips in different arrangements an 8-way DC splitter is also available (see RS 719-3165).

Ultra Thin Linear LED Lighting These compact linear LED lighting strips have a flat slimline cross-section. They are suitable for use in home, office, under kitchen cabinets, shelves, display cases. They are easy to install (two metal mounting clips and screws included). These LED strips utilise high brightness surface mounted LED chips and are available in either cool or warm white light and run on low voltage (24 V) for safety and produce no RF interference and operate silently.LED strips can be linked (up to 36W per run) with connectors or cable (one cable and one linear connector is supplied with each LED strip). A right angled connector is available as an extra (see RS 719-3156). Power supply is required, a 36W 24V switching power adapter is available (see RS 739-3510).To further extend the LED striplight reach, use interconnect power leads (available separately) in a choice of lengths:739-3514 100mm739-3526 250mm739-3523 1000mm739-3520 2500mmAlso these LED strips are dimmable when used with dimmer (see RS 719-3168). This dimmer also has a memory function. To connect multiple LED strips in different arrangements an 8-way DC splitter is also available (see RS 719-3165).

Knightsbridge 2x35W IP65 LED Up/Down Wall Light - Copper The Knightsbridge WALL2C is a fixed up and down wall light for adding decorative feature lighting for indoor and outdoor use. Made from 304 Stainless Steel with electroplated in copper colour finish for a modern look and waterproof to an IP65 rating. The LED wall luminaire offers the benefits of LED lighting with low maintanence and lifetime hours of up to 30000 hours. Requires 2 x 35 W GU10 lamps or LED GU10 equivalent. Features and Benefits • Copper Finish • Stainless Steel body • Lifetime hours: 30000 hours • Dimmable (Dependant on lamp) • Protection Rating: IP65

Ultra Thin Linear LED Lighting These compact linear LED lighting strips have a flat slimline cross-section. They are suitable for use in home, office, under kitchen cabinets, shelves, display cases. They are easy to install (two metal mounting clips and screws included). These LED strips utilise high brightness surface mounted LED chips and are available in either cool or warm white light and run on low voltage (24 V) for safety and produce no RF interference and operate silently.LED strips can be linked (up to 36W per run) with connectors or cable (one cable and one linear connector is supplied with each LED strip). A right angled connector is available as an extra (see RS 719-3156). Power supply is required, a 36W 24V switching power adapter is available (see RS 739-3510).To further extend the LED striplight reach, use interconnect power leads (available separately) in a choice of lengths:739-3514 100mm739-3526 250mm739-3523 1000mm739-3520 2500mmAlso these LED strips are dimmable when used with dimmer (see RS 719-3168). This dimmer also has a memory function. To connect multiple LED strips in different arrangements an 8-way DC splitter is also available (see RS 719-3165).

The Knightsbridge LED emergency bulkhead is constructed from polycarbonate and belonging to Class II, boasts an IP65 rating, ensuring robust durability and protection against dust and water ingress. Net weight 0.63 kgLamp includedLumens 490 lm

Knightsbridge RD1 Fixed Twist and Lock Downlight GU10/MR16 Features and Benefits Primary voltage 230 VMaximum wattage 50 WDie cast aluminium constructionProtection to IP20Diameter 79 mmOverall height 90 mmMinimum void 95 mmCut out diameter 70 mm