The LED2WORK mains connection cable for an LED system light SYSTEMLED. Connection cable with Wieland GST18i3 socket and SCHUKO angled plug. It has length of 5m and IP20 degree of protection. 190 Nominal cross-section 1.5 mm²<BR/>Number of poles 3<BR/>Weight 500g

The LED2WORK bracket for wall mounting of a CENALED LED light. The upper hole dimension is suitable for the screw-on base. Since the bracket is made of magnetically adhesive material, a light previously equipped with a magnet can also be easily attached. 254 Dimensions 60 mm x 60 mm x 60 mm<BR/>Metal material (magnetically adhesive)<BR/>M5 screws fastening to the lamp <BR/>Hole pattern dimensions 45 mm x 45 mm<BR/>Weight 250g<BR/>Gross weight 300g

The LED2WORK table clamp for screw base, a flexible arm, articulated arm or articulated head can be attached to table tops with a thickness of 15 mm to 60 mm. The screw base of the LED light can be screwed directly onto the mounting plate of the table clamp. 258 Dimensions 60 mm x 65 mm x 120 mm<BR/>Metal (magnetically adhesive), plastic<BR/>Hole pattern dimensions 45 mm x 45 mm (mounting plate)<BR/>Weight 450g<BR/>Gross weight 500g

The LED2WORK magnetic clamp is extremely strong holding magnet for the standard screw-on base of the LED luminaire series CENALED. This additional option turns every CENALED LED luminaire simply and safely into a magnetic luminaire or LED work luminaire with a magnetic base. 275 Dimensions (mm) 60 mm x 60 mm x 13 mm<BR/>Metal, plastic material <BR/>M5 screws attachment to luminaire<BR/>Weight (net) 200 g

The LED2WORK mains connection cable for an LED system light SYSTEMLED. Connection cable with Wieland GST18i3 socket and SCHUKO angled plug. It has length of 3m and IP20 degree of protection. 190 Nominal cross-section 1.5 mm²<BR/>Number of poles 3<BR/>Weight 400g

The LED2WORK Luminaire holder with ESD protection for permanent mounting of system luminaires, such as SYSTEMLED or PROLFILED, on T-slot profiles. Material used is steel and electrostatically dissipative plastic. 212 Dimensions (mm) 120x30x4<BR/>Attachment to lamp via T-slot stone<BR/>Weight 200g<BR/>ESD isolation

The LED2WORK Luminaire holder with ESD protection for permanent mounting of system luminaires, such as SYSTEMLED or PROLFILED, on T-slot profiles. Material used is steel and electrostatically dissipative plastic. 212 Dimensions (mm) 106x30x55<BR/>Attachment to lamp via T-slot stone<BR/>Weight 300g<BR/>ESD isolation

The LED2WORK Luminaire holder made of stainless steel for mounting the LED surface-mounted luminaire TUBELED_40 II. The two brackets are attached to the end caps of the luminaire with screws in the threaded holes. The light can then be aligned and fixed in the inclination. 273 Design angle<BR/>Weight 50g<BR/>Gross weight 100 g

The LED2WORK Luminaire holder made of stainless steel for mounting the TUBELED_40 series. The angle of inclination of the lamp can be adjusted almost unlimitedly via the bracket and then fixed. It is attached by screwing to the end caps. 237 Design angle<BR/>Weight 50g<BR/>Gross weight 100 g

The LED2WORK 1 pair of spring clips for fastening the LED industrial light INROLED_50 Ecolab and other LED lights with a diameter of 50 mm. The distance at which the brackets are attached depends on the selected lamp length. 224 Suitable for INROLED_50 Ecolab<BR/>Dimensions (mm) 60mm high, 52mm wide<BR/>Material Galvanized steel<BR/>Attachment to lamp via spring clip<BR/>Weight 20g<BR/>Gross weight 50g

The LED2WORK Luminaire bracket for food & beverage, clean room applications or other hygiene-sensitive areas lamp holder made of FDA-compliant material especially for INROLED_50 Ecolab. 186 Clamp material Polypropylene - PP<BR/>Mounting plate material Stainless steel<BR/>Cover plate material Stainless steel V4A<BR/>Sealing material Silicone rubber, food-safe

The LED2WORK Luminaire holder made of stainless steel for mounting the LED surface-mounted luminaire TUBELED_40 II. The two brackets are attached with screws through the threaded holes on the end caps of the light. With little effort, the light can then be aligned and fixed in the inclination. Ultimately, the lamp can then be attached to any magnetically adhesive surface. 374 Design angle<BR/>Weight 100 g<BR/>Gross weight 150g