Loctite Thread lock The Loctite 10ml thread lock is designed for locking and sealing of threaded fasteners. Because of its low viscosity and capillary action, the product wicks between engaged threads and eliminates the need to disassemble before application. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage from shock and vibration. This product can also fill porosity in welds, castings and powdered metal parts.Note:Testing should be carried out before contact with styrene, acrylic and polycarbonate-based plastics to ensure compatibility. Features and Benefits Medium strength for locking and sealing of threaded fasteners and close-fitting parts after assemblyPenetrates tightened threads, porous materials and cracks by capillary actionCure time is 24 hoursLow viscosity of 20 → 55mPa/sChemical composition of dimethacrylate EsterSpecific gravity of 1.08Operating temperature ranges between-55°C and 150°C Certifications ANSI/ESD S20.20:2014BS EN 61340-5-1:2007

Loctite Sealant PasTE For Thread Sealing The Loctite yellow 250ml gasket sealant paste is a general-purpose thread sealant for straight/straight and straight/taper threads and fittings. It fills the space between threaded parts and seals and locks at the same time. This paste is composed of methacrylate and has an excellent chemical and thermal resistance. It is designed for the locking and sealing of metal pipes and fittings as well as other threaded assemblies. This product provides an instant, low-pressure seal for metal pipes and fittings. It will not creep, shrink or shred. The product offers less migration of liquid product after application. Features and Benefits When fully cured, the sealant can withstand pressure more than 200barChemical ingredient present is methacrylateMedium strengthChemical ingredient present is methacrylateHigher-strength on contaminated surfacesHigh viscosity, thixotropicImproved thermal performanceOffers gap performance to 0.25 mm Operating temperature ranges between -55°C and 150°Chigh-performance on passive metals without an activatorEasy to apply Applications For medium strength applicationsSuitable for sealing of pipe fittings and coarse threaded componentsThread sealing Certifications ANSI/ESD S20.20:2014 BS EN 61340-5-1:2007DVGW approved

Loctite Gasket Sealant Liquid The Loctite white 50ml gasket sealant white liquid is designed for the locking and sealing of metal pipes and fittings. This product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage from shock and vibration. This liquid is composed of Amorphous, Crystal-free, Cumene, Cumene Hydroperoxide, Ethene, Fluorphlogopite, Fumed, Homopolymer, Octan-1-Ol, Polyglycol Dimethacrylate, Polyglycol Dioctanoate, Silica, Tetrafluoro and Titanium Dioxide. Its thixotropic nature reduces the migration of liquid product after application to the substrate. Features and Benefits Cure time is a minimum of 24 hoursHigh viscosity, thixotropicMedium strengthHas a specific gravity of 1.08Slow curing means that you have time to adjust your fittings Use for thread sizes up to M80Suitable for use on coarse threadsSeals to burst strength on most pipe systems when it is fully curedOffers a breakaway torque of 7Nm Applications Threaded sealingSuitable for thread sizes up to M80 Certifications ANSI/ESD S20.20:2014 BS EN 61340-5-1:2007

The Loctite adhesive is suitable for a wide variety of applications that require fast cure, flexibility, high adhesion and autoclave resistance. It cures in seconds when exposed to light of the proper wavelength and intensity and achieves excellent adhesion to glass, plastics and metal. The ability of this product to fluoresce under black light facilitates inspection of bonded assemblies for adhesive presence. It was specifically designed for bonding stainless steel cannula into hubs, syringes and lancets for needle assemblies. Bonds metals, glass and ceramics in secs.Particularly suited to stress-sensitive plasticsISO 10993 qualifiedLow viscosity

406 Adhesive Loctite adhesives are designed for bonding of plastics and elastomeric materials where fast bonding is required. Thin bond lines result in high cure speeds, increasing the bond gap decreases the rate of cure, making the 406 perfect for your application when needed. All models are highly reliable and excellent quality. Features & Benefits Low viscosity instant adhesiveEnsures uniform fast-fixturing of 'difficult' rubbers and elastomersBonds polyethylene, polypropylene and polyolefin plastics when used with Loctite 770 Primer

Loctite Pipe & Thread Sealant Liquid The Loctite blue 10ml pipe and thread sealant liquid is designed for locking and sealing of threaded fasteners, which require normal disassembly with standard hand tools. It cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage from shock and vibration. This product is composed if methacrylate and provides robust curing performance. Its thixotropic nature reduces the migration of liquid product after application to the substrate. This not only works on active metals (brass, copper, etc) but also on passive substrates such as stainless steel and plated surfaces. It offers high-temperature performance and oil tolerance. It tolerates minor surface contaminations from various oils, such as cutting, lubrication, anti-corrosion and protection fluids. Features and Benefits Cure time is 2 hoursMedium strengthMedium viscosity, thixotropicOil tolerantOperating temperature ranges between -55°C and 150°CPermits disassembly with hand tools for servicingTorque tension grade Applications Thread lockingSuitable for less active surfaces Certifications ANSI/ESD S20.20:2014 BS EN 61340-5-1:2007

Hysol 9455 A & B Fast curing mix-in-nozzle epoxy adhesiveFlowableExcellent impact resistanceOptically clear, ideal for potting applications

Loctite Super Glue The Loctite 460 super glue is a 20g, low viscosity for use with cyanoacrylate adhesive. It has less odour and low blooming properties and is particularly suitable for applications where vapour control is difficult. The absence of vapour eliminates blooming of surfaces adjacent to the bond line and the possibility of contaminations to delicate electrical and electronic assemblies. This product provides rapid bonding of a wide range of material and elastomers. Loctite 460 is particularly suited for bonding porous or absorbent materials such as wood, paper, leather and fabric. New health and safety improved formulation without adding Hydroquinone (HQ) and/or 2,2'-Methylenebis(4-methyl-6-tert-butylphenol) (MMBP). These raw materials function as shelf-life stabilizer and represent a small percentage. Features and Benefits High strengthFast cure timeLow bloom for cosmetic applicationsOperating temperature ranges between -40⁰C and 120⁰CNew and improved health and safety formulation Applications Rubber Glass Metal Plastic Certifications ANSI/ESD S20.20:2014BS EN 61340-5-1:2007

Loctite Epoxy Adhesive The Loctite 50ml grey epoxy adhesive is a dual cartridge, structural bonding epoxy that cures at room temperature to provide a toughened bond. It is therefore ideal for joining dissimilar substrate materials including metal, motorering thermoplastics and thermoset laminates such as SMC. Its thixotropic properties make it suitable for gap-filling and it provides both, high peel and shear strength.Note:Used with RS sealant dispenser - stock number 503379 Features and Benefits • Mix-in-nozzle toughened• Non-sag paste• Heat cure accelerated (4 minutes at 120°C)• Ideal for bonding dissimilar substrates like GRP and composites• Excellent peel strength• Setting time is 40 minutes• Cure time is 240 minutes• The operating temperature ranges between -55°C and 120°C Applications • Metal• Ceramic• Wood• Rigid plastic

The Loctite 55 is a general purpose, threaded pipe and fitting sealant which is wound from the dispensing package onto the threads of the pipe. It is supplied in containers, which serve for both storage and dispensing purposes. Recommended for sealing metal and plastic tapered pipe threads and fittings 4 inch NPT (National Pipe Thread) for use in industrial applications in aqueous and non-aqueous fluids. Particularly suitable in threaded assembly applications that require immediate use and may undergo small readjustments before use. This product is typically used in applications up to 149 °C. Certifications DVGW, KTW, NSF, WRAS

The Loctite general purpose, parts cleaner and degreaser is a concentrated, biodegradable cleaner that contains no hazardous solvents and dilutes with water to serve a wide range of industrial cleaning applications. Used for large bond gapsSpeeds up cure on passive and active surfacesIt is transparent, yellow to amber liquid activator Especially recommended for applications with passive metals or inert surfaces

Loctite Epoxy Resin Adhesive The Loctite 50ml epoxy resin adhesive is a two-part, ultra-clear, flowing, general-purpose epoxy adhesive suitable for bonding and potting where optical clarity and high strength are required. Features and Benefits Setting time is 20 to 65 minutesService temperature ranges between -50°C and 150°CCure time of 210 minutesLow moisture absorptionCures at room temperatureDelivers a tensile strength of 47N/mm²Ideal for bonding decorative panels and displaysPeel strength of .5N/mmViscosity is 7Pa-s Certifications ANSI/ESD S20.20:2014BS EN 61340-5-1:2007