RS-485 Line Drivers and Receivers, EXAR Exar has a broad range of RS-485 transceivers that are compliant to popular field bus standards, including PROFIBUS. Some may have advanced features like enhanced receiver failsafe, and 15kV ESD protection ensuring reliable and robust data communication over long cable lengths. Exar’s high ESD devices are qualified up to +/-15kV IEC 61000-4-2, and +/-15kV HBM (Human Body Model). The EXAR RS 485 transceivers can be used for RS 422 also.Most of Exar’s serial transceivers are pin and spec compatible with popular industry devices for direct drop-in second source replacement.

RS-232 Line Drivers and Receivers, EXAR Exar offers a wide range of RS232 serial communication standard (also known as TIA/EIA-232) devices. They span over a range of data rates from 20kbps to 1Mbps, including the popular 120kbps and 250kbps speeds. RS-232 transceivers operate from a single 5V supply, and many can operate with a supply voltage as low as 3VThe enhanced ESD (ElectroStatic Discharge) up to +/-15kV IEC 61000-4-2, and/or +/-15kV HBM (Human Body Model)Most of Exar’s devices are pin and spec compatible with popular industry standard devices for direct drop-in replacement

XR21B1411 UART-USB evaluation board The XR21B1411 is an enhanced Universal Asynchronous Receiver and Transmitter (UART) with a USB interface. The USB interface is fully compliant to Full Speed USB 2.0 specification that supports 12Mbps USB data transfer rate. The USB interface also supports USB suspend, resume and remote wakeup operations. ±15kV HBM ESD on USBD+/USBD-USB 2.0 Compliant, Full-Speed (12Mbps)Supports USB suspend, resume and remote wakeup operationsUnique pre-programmed USB serial numberEnhanced UART FeaturesFractional Baud Rate Generator128byte TX FIFO384byte RX FIFO7, 8 or 9 data bits1 or 2 stop bitsOdd, even, mark, space or no parityAutomatic Hardware (RTS/CTS or DTR/DSR) Flow ControlAutomatic Software (Xon/Xoff) Flow ControlMultidrop modeAuto Transceiver ControlHalf-Duplex modeSelectable GPIO or Modem I/OInternal 48MHz clock with clock divisors programmable down to 6MHzSingle +5V power supply5V tolerant inputs

Universal Asynchronous Receiver/Transmitter (UART), EXAR Exar offer a variety of UARTs (Universal Asynchronous Receiver Transmitter) with a broad range of first in, first out (FIFO) depths, while supporting popular central processing unit (CPU) bus interface such as 8-bit VLIO.

RS-485 Line Drivers and Receivers, EXAR Exar has a broad range of RS-485 transceivers that are compliant to popular field bus standards, including PROFIBUS. Some may have advanced features like enhanced receiver failsafe, and 15kV ESD protection ensuring reliable and robust data communication over long cable lengths. Exar’s high ESD devices are qualified up to +/-15kV IEC 61000-4-2, and +/-15kV HBM (Human Body Model). The EXAR RS 485 transceivers can be used for RS 422 also.Most of Exar’s serial transceivers are pin and spec compatible with popular industry devices for direct drop-in second source replacement.

RS-232/RS-485/RS-422 Transceivers, EXAR Typical Applications for Exars' RS-232, RS-422, RS-485 Serial Tranceivers:Industrial and Single Board ComputersIndustrial and Process Control EquipmentPoint-Of-Sale EquipmentBuilding Security and Automation

RS-485 Line Drivers and Receivers, EXAR Exar has a broad range of RS-485 transceivers that are compliant to popular field bus standards, including PROFIBUS. Some may have advanced features like enhanced receiver failsafe, and 15kV ESD protection ensuring reliable and robust data communication over long cable lengths. Exar’s high ESD devices are qualified up to +/-15kV IEC 61000-4-2, and +/-15kV HBM (Human Body Model). The EXAR RS 485 transceivers can be used for RS 422 also.Most of Exar’s serial transceivers are pin and spec compatible with popular industry devices for direct drop-in second source replacement.

RS-232 Line Drivers and Receivers, EXAR Exar offers a wide range of RS232 serial communication standard (also known as TIA/EIA-232) devices. They span over a range of data rates from 20kbps to 1Mbps, including the popular 120kbps and 250kbps speeds. RS-232 transceivers operate from a single 5V supply, and many can operate with a supply voltage as low as 3VThe enhanced ESD (ElectroStatic Discharge) up to +/-15kV IEC 61000-4-2, and/or +/-15kV HBM (Human Body Model)Most of Exar’s devices are pin and spec compatible with popular industry standard devices for direct drop-in replacement

RS-232 Line Drivers and Receivers, EXAR Exar offers a wide range of RS232 serial communication standard (also known as TIA/EIA-232) devices. They span over a range of data rates from 20kbps to 1Mbps, including the popular 120kbps and 250kbps speeds. RS-232 transceivers operate from a single 5V supply, and many can operate with a supply voltage as low as 3VThe enhanced ESD (ElectroStatic Discharge) up to +/-15kV IEC 61000-4-2, and/or +/-15kV HBM (Human Body Model)Most of Exar’s devices are pin and spec compatible with popular industry standard devices for direct drop-in replacement

RS-232/RS-485/RS-422 Transceivers, EXAR Typical Applications for Exars' RS-232, RS-422, RS-485 Serial Tranceivers:Industrial and Single Board ComputersIndustrial and Process Control EquipmentPoint-Of-Sale EquipmentBuilding Security and Automation

RS-485 Line Drivers and Receivers, EXAR Exar has a broad range of RS-485 transceivers that are compliant to popular field bus standards, including PROFIBUS. Some may have advanced features like enhanced receiver failsafe, and 15kV ESD protection ensuring reliable and robust data communication over long cable lengths. Exar’s high ESD devices are qualified up to +/-15kV IEC 61000-4-2, and +/-15kV HBM (Human Body Model). The EXAR RS 485 transceivers can be used for RS 422 also.Most of Exar’s serial transceivers are pin and spec compatible with popular industry devices for direct drop-in second source replacement.