The MG Chemical is a solder paste that is made from a blend of high purity, non-recycled tin and lead alloy powder combined with a no-clean flux to form a paste. It is designed for surface mount applications and provides high tack force and good wettability. The post-soldering residues are transparent, nonconductive, non-corrosive, and highly insulated. Alloy exceeds J-STD-006C and meets ASTM B 32 purity requirementsFlux meets J-STD-004BNon-corrosiveNon-conductive residueHalide freeGood wettability

The MG Chemicals No-Clean Solder Wire uses a high-purity eutectic Sn99.3/Cu0.7 alloy, complemented by a no-clean, synthetically refined, spatter-proof resin flux core. 4901 solder meets J-STD-004B, ASTM B 32, and exceeds J-STD-006C specifications. Sn99 solder is a great lead-free alternative to leaded solders, and is considered one of the best solder wires for electronics. It is a suitable and less costly replacement for SAC305. Resin spreads like rosin-activated fluxVirtually non-spatteringNon-corrosiveNon-conductiveHalide-free

The MG chemical alcohol cleaner is available in 475 mL bottle, It is mainly used as an electronics cleaner. The liquid Isopropyl Alcohol is perfectly mixable with water and also with large variety of organic solvents. It is good in dissolving dirt, dust, greases, and light organic contaminants on the equipment's. The cleaner is plastic safeIt is quick drying relative to water and leaves no residueIt is economicalEvaporation rate is slower than pure IPA

The MG Chemicals d-Limonene is an industrial grade solvent. It is biodegradable, with a pleasant odor. 433C-d will dissolve HIPS (High Impact Polystyrene), used in 3D printing applications for creating support material. It can also be used to remove adhesives and tar, clean floors, and as a degreaser. It works well as a hand cleaner, a release agent, and as a graffiti remover. In many instances it can replace petroleum-based products. Biodegradable solvent and cleaning agent100% bio-based free of any petroleum productRoHS Compliant

The MG Chemicals d-Limonene 433C d-Limonene is an industrial grade solvent. It is biodegradable, with a pleasant odor. 433C-d will dissolve HIPS (High Impact Polystyrene), used in 3D printing applications for creating support material. It can also be used to remove adhesives and tar, clean floors, and as a degreaser. It works well as a hand cleaner, a release agent, and as a graffiti remover. In many instances it can replace petroleum-based products. Biodegradable solvent and cleaning agent100% bio-based free of any petroleum productRoHS Compliant

The MG chemical alcohol wipes comes in a tub package which is mainly used as an electronics cleaner. The liquid Isopropyl Alcohol is perfectly mixable with water and also with large variety of organic solvents. It is good in dissolving dirt, dust, greases, and light organic contaminants on the equipment's. It removes dust, dirt, and greases from electronics and peripheralsAlso it is suitable for use in food facilities as a non-food chemical70/30 Isopropyl Alcohol blend

The MG chemical alcohol wipes comes in a box which contains 500 single wipes. These wipes are mainly used for plastics, seals, ceramics, printed circuit board components and also in electronics industry. The wipes are good at dissolving dirt, light organic contaminants, and ionic flux residues. Also It is quick drying relative to water. It removes water and humidity from components and leaves them dryIt is safe for aqueous environmentsIt has low toxicity

The MG Chemicals No-Clean Solder Wire is electronics grade solder wire. This lead-free solder uses the predominant lead-free alloy composition, exceeds J-STD-006C and meets ASTM B 32 purity specifications. It is complemented with a no-clean, synthetically refined, spatter-proof resin flux core that is classified as REL0 according to J-STD-004B. This solder is a great alternative to leaded solders.SAC305 lead-free solder achieves a consistent solder and flux percentage thanks to our state-of-the-art extrusion wire-drawing machine, which continuously monitors the wire to prevent voids and ensure consistency, providing a top-grade solder wire. Resin spreads like rosin-activated fluxVirtually non-spatteringNon-corrosive residuesNon-conductive residuesHalide-free

The MG Chemical is a thinner is used to dilute EMI/RFI shielding coatings that require mild, plastic-safe solvents. As a cleaner, it is effective at removing various contaminants such as oil and greasy flux residues without harming the substrate before coating the surface. Plastic safe – compatible with most sensitive substratesUsed in electronic parts and enclosuresMild diluent designed for EMI/RFI shielding productsModerately fast evaporation rate

The MG chemical alcohol presaturated wipes comes in a resalable soft package which is mainly used as an electronics cleaner. The liquid Isopropyl Alcohol is perfectly mixable with water and also with large variety of organic solvents. It is good in dissolving dirt, dust, greases, and light organic contaminants on the equipment's. It removes dust, dirt, and greases from electronics and peripheralsIt is RoHS compliantIt is good for cleaning SMT stencils

The MG Chemical 422C is a acrylic-silicone blend waterproof conformal coating that cures to a durable, flexible and smooth finish. It is easy to apply and can be handled in only 10 minutes. It may be removed with appropriate strippers, or soldered through for repair or rework. Certified UL94 V-0 Maximum service temperature of 200 °CFast cure, tack free in about 10 min dries in 20 min at 65 °C [149 °F]Fluoresces under UV-A lightValidated for selective robotic coating equipmentCorrosion resistant

The MG Chemical is 99.9% ACS reagent grade isopropyl alcohol aerosol spray for cleaning electronics. Good solvency, low surface tension, and aerosol pressure make it an effective flux remover and general electronics cleaner. It effectively cleans ionic, polar and non-polar residues. It is safe on most painted surfaces, plastics, and elastomers. It leaves no residue, evaporates quickly relative to water, and does not cause corrosion. It is anhydrous, hydroscopic, and fully miscible with water. 99.9% IPAAnhydrousFast dry timeZero residueCARB compliant