The Mitutoyo provide a portable measuring instrument that allows you to easily and accurately measure surface roughness. It have skid system with touch-screen functionality and built-in printer. It works independently of mains power which allows to make on-site measurements. It has 2 different evaluation conditions within 1 measurement adjustable. It performs roughness analyses conform to various international standards (EN ISO, VDA, ANSI, JIS) and customized settings. 14.5 cm [5.7“] colour LCDAuto-Sleep mode after 5 minutesStatistical analysis and coloured tolerance judgementEasy and intuitive menu navigationStore up to 10 different measurement valueAn optional SD card featureSeparate password protect functions

ABSOLUTE IP67 Calliper The IP67 digital caliper complies with DIN EN 60 529 is dust proof and withstands temporary complete immersion in water without suffering any damage. Sliding calliper with 0 - 150 mm measurement range.Equipped with a flat depth gauge.Precision: 0.02 mm.Resolution: 0.01 mm.Resistance to dust, coolant fluids and splashes of oil and water to ensure optimum operation even in the most hostile of environments.Functions: automatic shut-off, ORIGIN.

Mitutoyo 150mm Digital Precision Caliper The Mitutoyo 0 to 150mm range digital precision calliper is a highly accurate measuring instrument. It is enabled with a new age electromagnetic inductive sensor that repels dirt, oil, and water ensuring maximum accuracy. It has a function that starts the absolute-mode measurement without any zero-setting after it is switched on.The INC (incremental) measurement function enables the display value to be set to zero, temporarily, at the current slider position to enable easy incremental-mode measurement. The original position of the calliper can be set or reset with the ’origin' switch at any time. It has advanced functions like low battery alarm indication and carbide-tipped jaw that make it ideal for various applications measurement of rough-machined workpieces, castings, and grindstones. Features and Benefits Step-measurement capableBattery life of approximately 3.5 years has been achieved under normal use through the adoption of Mitutoyo's absolute scaleThe slider configuration features an ergonomic, thumb-friendly shapeResolution of 0.01mmAccuracy of ±0.02mmButton-type silver oxide battery power supplyHigh response speedCarbide-tipped jaws for outside and inside measurementFont height is 9mm, alleviation of fatigue with the high-contrast LCD Mass 168g Applications Mechanical engineeringAerospace industriesSteel and other metalwork industry

Mitutoyo 293 Series, IP65 Imperial or Metric readingLarge LCD displayProtected to IP65 for use where coolant may be presentOriginal setting and Auto power offAccuracy +/1μm, Flatness 0.3μm, Parallelism 1μm

Mitutoyo-Absolute Electronic calipers with an LCD display which will display in either ’metric/imperial (switchable)’ or ’metric only’ reading depending on model. General Features: Fully hardened stainless steel beam & jaws with an anti-glare, satin chrome finish All measuring surfaces are ground and lapped for high accuracyCapable of measuring: inside, outside, depth and stepStorage Temp: -10°C to +60°COperating Temp: 0°C to +40°C Electronic Features: ON/OFF - Switches unit on, display indicates distance of jaws from pre-set origin pointABS - Absolute feature re-sets the ’reference’ point of measurement of the instrument jawsin./mm - Selects imperial or metric displayOrigin - Pre-sets the zero point of the instrument. This point is memorised even if the unit is switched off

Mitutoyo 293 Series, IP65 Imperial or Metric readingLarge LCD displayProtected to IP65 for use where coolant may be presentOriginal setting and Auto power offAccuracy +/1μm, Flatness 0.3μm, Parallelism 1μm

Digital These three digital depth gauges give measurements in imperial or metric with resolution to 0.0005in. or 0.01mm. It has functions for ± deviation from nominal, instant metric/imperial conversions and an output port for transmission to Mitutoyo SPC data processors. The non-contact linear measuring system is unaffected by electrical interference or magnetism and will compensate for mechanical wear. All gauges are supplied fitted with an SR44 battery (stock no. 593-423).

Mitutoyo-Absolute Electronic calipers with an LCD display which will display in either ’metric/imperial (switchable)’ or ’metric only’ reading depending on model. General Features: Fully hardened stainless steel beam & jaws with an anti-glare, satin chrome finish All measuring surfaces are ground and lapped for high accuracyCapable of measuring: inside, outside, depth and stepStorage Temp: -10°C to +60°COperating Temp: 0°C to +40°C Electronic Features: ON/OFF - Switches unit on, display indicates distance of jaws from pre-set origin pointABS - Absolute feature re-sets the ’reference’ point of measurement of the instrument jawsin./mm - Selects imperial or metric displayOrigin - Pre-sets the zero point of the instrument. This point is memorised even if the unit is switched off

Mitutoyo Digimatic Series 543 ID-H Indicator This professional indicator has extensive functionality and a multi-colour back-lit screen. The ID-H range offers high accuracy and resolution along with much needed features such as data hold, function lock, Digimatic data output and remote PC control. High 0.0005 mm resolutionHigh 0.0015 or 0.0025 mm accuracySwitchable analogue measuring range1000 mm/s response speedAlarmRS-232 PC interfaceCarbide point with M2.5 x 0.45

Digital These three digital depth gauges give measurements in imperial or metric with resolution to 0.0005in. or 0.01mm. It has functions for ± deviation from nominal, instant metric/imperial conversions and an output port for transmission to Mitutoyo SPC data processors. The non-contact linear measuring system is unaffected by electrical interference or magnetism and will compensate for mechanical wear. All gauges are supplied fitted with an SR44 battery (stock no. 593-423).

The Mitutoyo digimatic calipers have carbide-tipped jaws and allow you to take reliable measurements. The slider provides smooth, stable and comfortable operation.Character height are 9 mm (alleviation of fatigue with the high-contrast LCD)The ABS scale requires no origin setting after power-on and also has no limit to response speed.Extraordinary battery life

Mitutoyo 293 Series, IP65 Imperial or Metric readingLarge LCD displayProtected to IP65 for use where coolant may be presentOriginal setting and Auto power offAccuracy +/1μm, Flatness 0.3μm, Parallelism 1μm