Deliver to United Kingdom
Website |
---|
The Mobile Mark RM-WB1 wideband antenna covers the entire 5G Sub-6 frequency band from 600-6000 MHz. The “6-2-6” antenna solutions make it possible to connect to any of the current or planned cellular frequency bands that reside at or below 6 GHz. This antenna contains a single element covering 617-960 & 1710-6000 MHz. This includes the new Band 71 at 617 to 698 MHz, CBRS at 3550 to 3700 MHz and LAA at 5 to 6 GHz. The RM-WB1 can also be used for NB-IoT and LTE-M applications where the specific frequency band may vary from project to project. Covers all Cellular & 5G LTE Frequencies worldwide from 617 MHz - 6000 MHzRugged and attractive ASA radome, available in thru hole or mag-mountCBRS (Citizen Band Radio Service) at 3.55-3.7 GHz and Band 71 at 617-698 MHz
Show DetailsAntenna - Broadband Mobile Mark offer a range of wireless broadband high performance antennas including the PSKN3-700/2100S which cover wideband such as the GSM/CDMA, AWS at 1.7-2.1 GHz, UMTS and the new LTE 700MHz band with a SMA male connector.The Magnet Mount Antenna MAG2-UMB-2C dual band version covers UMTS at 2.1 GHz and Voice/Data bandwidths. High frequency performance Mag-Mount antenna IMAG5-2400S (7932064) and MAG2-UMB-2C (7932061) both have their own built in ground plane so no need to mount on a metal surface. Half wave design: ground-plane dependant; PSKN3-700/2100S:;3 dBi gainMagnet Mount Antenna: IMAG5-2400S; 5dBi Gain MAG2-UMB-2C; 2dBi Gain
Show DetailsOD Series High Vibration 2.4GHz Omni Antenna The MobileMark 2.4 GHz high vibration antenna provide an excellent solution for a large area network in extreme environments such as quarry, mining and oil field construction.The omni directional antenna OD5-2400/5500-MOD2-BLK will cover frequency ranges of 2.4GHz and 5.5GHz at 5 dBi. The OD-MOD2 series is made up from black fibreglass and aluminium that gives protection against the weather conditions. MobileMark's antennas give enhanced performances with the unique phasing, as it cancels out-of-phase current distribution. · Uniform omni directional· VSWR 2:1 max over band· Antenna diameter,25mm· Shock and vibration, EN 300 019-2-4, IEC 60068· OD3-2400MOD2-BLK, 2.4 GHz,3dBi · OD6-2400MOD2-BLK 2.4 GHz, 6dBi· OD5-2400/5500MOD2-BLK, 2.4 GHz and 5.5 GHz,5dBi
Show DetailsThe Mobilemark PN6-868 is a compact, low profile RFID tag antenna that is housed in a weather-tight random. The antenna is suitable for either in-building or outside installation. This PN6-868 features left-hand circular polarization, and would typically be used for RFID applications. It provides a generous pattern of 80 degrees in both azimuth and elevation. Weatherproof random in-building or outdoor coverage use6 dBi gain for 915 RFID (US),868 RFID (EU),and 915 ISMAvailable in Right Hand and Left Hand Circularly Polarized(CP)
Show DetailsAntenna Panel PND10-W This Panel Antenna has six separate connection ports to provide optimum MIMO (multiple-input-multi-ple-output) performance for the new WiFi 802.11 ac modems. The antenna achieves MIMO performance by using multiple polarisation for the six elements housed within the antenna. The antenna is backwards compatible for 802.11 n and 802.11b/g modems.Features Directional Antenna for 802.11 ac; backwards compatible to earlier models Quad-polarisation MIMO (Horizontal, Vertical, +45 Slant, and -45 Slant) Mounting hardware allows vertical tilt adjustment of up to 24 Attractive, compact package measuring 9 x 9 (23 x 23 cm)Mobile Mark
Show DetailsCable Assemblies SMA Series Mobile Mark RF cable assemblies provide extension capability to standard antennas configurationsImpedance: 50 Ω nominal CA39-195-CJ (793-2115) and CA120/195-CJ (793-2119) are both cable jumpers for the directional MIMO Antenna PND8 model (723-9132).
Show DetailsThe Mobilemark CVW Series Wideband Covert Antenna for GPS. Tracking are designed to cover more wireless applications. This two-cable antenna combines two applications at a time, GPS on one cable and any one of several wireless data applications on the other cable. Multiband antenna for GPS and Cellular Voice/Data up to 2.2 GHzRugged case passes industry and military shock and vibration testsDesigned to work with most commercially available Cellular/ Trunking/ISM modems
Show DetailsThe Mobile mark LTM-PMK is the standard pole mount kit for the LTM series. The heavy duty bracket is designed for quick and easy installation. Universal Wall Mounts available in standoffs of 2.5 inches to 1 ft.Wall/Pole mount adapts stud antennas to fixed base station/access point
Show DetailsThe Mobile mark PSKN dual band antennas offer excellent performance and are available for a number of dual band and broadband wireless data applications. Three different series are available a model for US Cellular 3G, a model for EU GSM and a wideband model for US Cellular including GSM/CDMA, LTE & AWS/UMTS. Sleek profile with adjustable elbow for straight or angled operationCompact design, ground plane independent with high performanceCan be configured as fixed straight or fixed right angle (prefix PSN or PSNRA)
Show DetailsAntenna - SMW-414 multiband This is a surface-mount multiband antenna with four elements covers Cellular/ LTE GSM/CDMA bands, AWS bands, XLTE, LTE-A, Spark and WiMAX. Also can be applied to any vehicle, cargo container or trailer. The antenna is ready for 4G or 5G.
Show DetailsAntenna - Covert CVW-LTE CVW-LTE antenna by Mobile Mark covers GPS and all Cellular frequencies which include 3G Cellular, 4G LTE, AWS, UTS, XLTE, LTE-A, Spark and WiMAX. The antenna is encased in a solid radome made from black ABS plastic and meets the industry and military standards. Features • Compact, covert profile; 1.6” W x 5.5” L • Global LTE antenna; available with or without GPS antenna • Broadband coverage: 694 to 960 and 1700 to 2700 MHz • Mount outside or inside enclosure
Show DetailsAntenna - Omni OD3-700/2700 This antenna is optimised for use in 3G cellular, 4G LTE and LTE plus systems. The antenna can be used for access point or customer premise equipment (CPE). With the omnidirectional coverage, it is easier to install and align with other antennas in the wireless network. Constructed using fibreglass radome making it durable and rugged. Features • 2 to 3 dBi antenna provides uniform omni coverage• Mounting kit includes all hardware needed
Show Details