Moflash Red LED Buzzer Beacon, 80 dB, 20 to 30 V AC/DC - LEDA100 Series - LEDA100-02-02 Use this red LED (light-emitting diode) buzzer beacon from Moflash as a signalling tool in commercial and industrial situations. It combines a piezo buzzer and a light with selectable static or flashing modes.A red lens colour makes this device useful as a clearly visible warning signal in the event of a machine failure or emergency. For versatility, it can be wall or surface mounted and comes with screw holes for easy installation. • Low current consumption for improved energy efficiency• IP (ingress protection) 65 rating for resistance to dust and low-pressure water jets• Wide operating temperature range of -25°C to +55°C for use in demanding environments• Base made of ABS (acrylonitrile butadiene styrene) plastic for resistance to impacts and corrosion• Produces 80 dB (decibels) of sound for an easy-to-hear warning signal Application Information • Fire trucks• Mechanical and automation industries• Process and packaging plants How can I switch between the flashing and static modes? A jumper link on the printed circuit board (PCB) lets you select between the two modes. The design also accommodates a third wire for switching from a pre-set static mode to flashing mode.

Moflash Industrial ECO LED Beacon - LEDS100 Series The LEDS100 economy series are suitable for light commercial & industrial signalling applications where local indication is required. These beacons have two selectable stages of alarm, flashing or continuous (static) mode, selectable by a jumper link on the PCB. The design also allows for a third wire connection giving flexibility to switch from a pre-set static mode to flashing.The ECO LEDS beacons have been designed predominantly to offer a cost effective solution against more traditional incandescent types of lamps, whether through new plant and machinery installations or existing facility upgrades.This design allows for termination inside the enclosure through the base of the beacon, either from directly below or using a 6mm cabling channel at 90° to the base for surface cabling. The LEDS incorporates two mounting studs 2 x 5mm on 45mm centres. Dual function, flashing or continuous (static) modeContinuously ratedLED long lifeLow current consumptionSuitable for surface, conduit box or wall mounting2 stud fixing360° light output around the vertical axisDustproof and weatherproofUV stable polycarbonate lensUV stable ABS plastic base160 flashes per minute (FPM)IP65 protectionRoHS compliantCE Marked

Moflash Amber LED Buzzer Beacon, 80dB, 20 to 30 V AC/DC - LEDA100 Series - LEDA100-02-01 This beacon from Moflash combines an amber-coloured LED (light-emitting diode) lamp with a piezo buzzer to produce warning signals in commercial and industrial applications. For versatility, you can choose between a static mode and a flashing mode by using a jumper link on the printed circuit board (PCB). The device is also designed to accommodate a third wire that lets you switch from the preset static mode to the flashing mode. It's a useful safety device in workplaces such as factories and production plants. • ABS (acrylonitrile butadiene styrene) base material for resistance to impact and corrosion• UV (ultraviolet) stable polycarbonate lens for even spread of light rays• IP (ingress protection) 65 rated for resistance to dust and low-pressure water jets• Broad operating temperature range of -25°C to +55°C for use in demanding conditions Application Information • Crane construction• Switch cabinet construction• Industrial vehicles What mounting options does this beacon buzzer have? This buzzer can be surface or wall-mounted to suit the needs of your application. Can the buzzer be controlled independently of the light? No, the buzzer is designed to operate in sync with the LED lamp.

Moflash TLM Modular Signal Tower The LED-TLM signal towers are ideally suited for status indication in light commercial & industrial signalling applications where a local signal is required. They have two selectable stages of alarm, flashing or continuous (static) mode, selectable by a slide switch on the PCB. The ECO LED-TLM signal towers have been designed predominantly to offer a cost effective solution against more traditional incandescent types of lamps, whether through new plant and machinery installations or existing facility upgrades.The design is modular and is easily assembled. Colour modules are supplied with quick fix termination that simply pushes into the male terminal in the module below to make a connection.The range also comes with an audible module option that can be fitted anywhere in the modular stack Features and Benefits • Beacon units are dual function, flashing or continuous (static) mode• Sounder unit output: 80 - 120 dB• Continuously rated• LED long life• Low current consumption• Suitable for surface mounting• 360° light output around the vertical axis• Dustproof and weatherproof• UV stable polycarbonate lens• UV stable ABS plastic base• 60 flashes per minute (FPM)• IP54/65 protection• RoHS compliant• CE Marked

Moflash Xenon Signalling Beacon, Flashing, 230 V AC - X500 Series - X500-22RS The Moflash AC-powered xenon beacon is ideal for indoor or outdoor applications where a very bright warning signal is needed. It produces a powerful 24-joule flash at a rate of 60 FPM (flashes per minute). The warning can be made even more noticeable by using the double-flash mode which extends the signal duration with an 18-joule second flash. This highly visible signal beacon can be used in a range of applications including fire alarms and process control. • High light output maximises warning efficiency• Integrated Fresnel lens increases light intensity• 360° light output (around vertical axis) boosts signal effectiveness• Versatile option suitable for surface or wall mounting Application Information • Manufacturing• Warehouses• Process control Can I run this beacon all day? Because of the high power rating of the beacon, it should be used for a maximum of 12 hours in a 24-hour period. Is this beacon weatherproof? Yes, this beacon has an IP (ingress protection) rating of 65, meaning it's dust-tight and will protect against low-pressure water jets. To make the most of this protection, fit the unit in an upright position, with the base below the lens.

Rotating Beacon DIN 3 point fixingsOptional M20 conduit knockoutSupplied with 60W bulbs

Moflash Industrial ECO LED Beacons - LED100 Series The LED100 economy series is suitable for light commercial & industrial signalling applications where local indication is required. These beacons have two selectable stages of alarm, flashing or continuous (static) mode, selectable by a jumper link on the PCB. The design also allows for a third wire connection giving flexibility to switch from a pre-set static mode to flashing.The ECO LED beacons have been designed predominantly to offer a cost effective solution against more traditional incandescent types of lamps, whether through new plant and machinery installations or existing facility upgrades.The design allows for termination inside the enclosure through the base. Dual function, flashing or continuous (static) modeContinuously ratedLED long lifeLow current consumptionSuitable for surface, conduit box or wall mountingOptional wall bracket & guard available2 point fixing360° light output around the vertical axisDustproof and weatherproofUV stable polycarbonate lensUV stable ABS plastic base160 flashes per minute (FPM)IP65 protectionRoHS compliantCE marked

Moflash Industrial ECO LED Beacon - LEDS100 Series The LEDS100 economy series are suitable for light commercial & industrial signalling applications where local indication is required. These beacons have two selectable stages of alarm, flashing or continuous (static) mode, selectable by a jumper link on the PCB. The design also allows for a third wire connection giving flexibility to switch from a pre-set static mode to flashing.The ECO LEDS beacons have been designed predominantly to offer a cost effective solution against more traditional incandescent types of lamps, whether through new plant and machinery installations or existing facility upgrades.This design allows for termination inside the enclosure through the base of the beacon, either from directly below or using a 6mm cabling channel at 90° to the base for surface cabling. The LEDS incorporates two mounting studs 2 x 5mm on 45mm centres. Dual function, flashing or continuous (static) modeContinuously ratedLED long lifeLow current consumptionSuitable for surface, conduit box or wall mounting2 stud fixing360° light output around the vertical axisDustproof and weatherproofUV stable polycarbonate lensUV stable ABS plastic base160 flashes per minute (FPM)IP65 protectionRoHS compliantCE Marked

Moflash Flashing Red Electronic Sounder Beacon, 24V DC, 105dB - IS-SB Series - IS-SB-02-02 Improve safety in your industrial environments with this combined sounder and beacon from Moflash. It provides a choice of 32 different tones at a sound output level of up to 105dB (decibels), producing a range of highly audible alarms for use in a variety of applications.The bright red LED (light-emitting diode) has a flashing effect that's highly visible in nearly all lighting conditions, ensuring that personnel are aware of a potential emergency. This sounder beacon is ideal for use in fire-fighting and security installations. You can also mount it in commercial settings as a warning device. Features & Benefits • IP66 (ingress protection) rating for protection against dust and high-pressure water jets• Twist-and-click base design for quick and easy installation• Broad operating temperature range of -40°C to +55°C makes it suitable for use in demanding environments Applications • Alarm systems• Assembly plants• Mining industry How safe is this electronic sounder beacon in the event of a fire? As the beacon is housed in a durable polycarbonate material, it's flame-retardant and heat-resistant, so it's safe to use and will continue to operate effectively in the event of fire.

Moflash Flashing Amber Beacon, 40 to 380V DC, 85 to 285V AC - LED100 Series - LED100-05-01 This flashing LED (light-emitting diode) beacon from Moflash is designed for commercial and industrial signalling. The amber bulb switches on and off repeatedly to alert your workforce of a potential hazard. The unit's 360° beam has an impressive reach along the vertical axis to ensure the alarm is visible in all directions. As the LED bulb uses very little power, this beacon is an energy-efficient option that produces powerful light and offers a long service life. Features and Benefits • Operating temperature range of -25°C and +55°C for versatile use in demanding environments• Extremely strong polycarbonate cover material to guard against damage• UV-resistant lens and base to prevent warping in bright light• 8 LED bulbs for clear and reliable signalling• Surface-mount type for secure installation in a variety of situations Application Information • Warehouses• Production lines• Maintenance equipment• Emergency-service vehicles Is this beacon suitable for use outdoors? The beacon has an IP65 (ingress protection) rating, which means it can withstand low-pressure water jets from all directions, as well as sustained exposure to dust.

Moflash Green Multifunction LED Beacon, 85 to 280V AC, 72mm Base Diameter - LED100 Series - LED100-05-04 Use this green LED beacon from Moflash to indicate normal operating conditions in your work environment. To suit your application needs, you can set this multifunction beacon to a flashing or continuous light mode using a jumper link on its PCB (printed circuit board). This signaller is suitable for surface, conduit box or wall mounting thanks to its two base termination points, giving you flexible installation options. Its compact size of 33 (length) x 72 (diameter) x 107mm (height) makes it a good choice for installation in tight spaces. Features & Benefits • IP65 (ingress protection) rating for protection against dust and high-pressure water jets• UV-stable PC (polycarbonate) lens to prevent warping or discolouration in direct sunlight• Fast flash rate of 160 FPM (flashes per minute) to urgently draw attention Applications • Industrial signalling• Factory equipment• Processing plants What’s the operating temperature of this beacon? This beacon has a wide operating temperature range of -25°C to +55°C, making it suitable for use in both cold and hot environments.

Moflash Green LED Buzzer Beacon, 80dB, 10 to 17V AC/DC - LEDA100 Series - LEDA100-01-04 This green buzzer beacon from Moflash provides a versatile signal for your industrial environment thanks to its combined LED bulb and piezo buzzer alarm. You can easily set the light to a flashing or continuous mode using a jumper link on the PCB (printed circuit board). This buzzer beacon has a UV-stable polycarbonate (PC) lens to ensure reliable performance when used in sunlight. A flash rate of 160FPM (flashes per minute) provides an urgent signal. For versatile installation, you can easily mount this unit to your wall or surface via the three termination points at its base. Features & Benefits • Wide operating temperature range of -25°C to +55°C for use in demanding environments• IP65 (ingress protection) rating indicates protection against dust and high-pressure water jets• Light output of 360° for visibility from all angles Applications • Industrial equipment operation• Automation systems• Production plants How loud is this sounder beacon? This beacon has a maximum volume of 80dB (decibels) at a distance of 1m. This makes it easy to hear in noisy work environments.