The Molex Premise Networks Zone Enclosure for Raised / Access Floor Installations is designed to accept copper or fibre cabling via the deployment of interchangeable mounting plates, supporting up to 24 Data Gate Jack copper ports or 24 fibre adapters (48 It is cost-effective, robust, and versatile<BR/>It is manufactured from strong cold-rolled steel, finished in black

The Molex Premise Networks 1U multi-function fibre enclosure is a configurable rack mount unit for storing and terminating incoming fibre cable. The fibre enclosure has been designed to accommodate various termination types and adapter configurations. This fibre enclosure accommodates up to 4 modlink quick connect cassettes<BR/>It allows for secure routing of patch cords can be retro fitted

PowerCat Cat 5e Trunk Molex category 5E 4 Pair U/UTP cable, has been designed to support 100 MHz up to 1 Gb/s transmission systems over 100 m. This cable is part of the PowerCat System range of products, that have been designed based on the PowerSum principle of crosstalk measurement and testing. Features and Benefits Supplied in 305 m easy spool box Conductor Size: 24 AWG Soft Plain Copper

PowerCat 6 RJ45 Shielded Patch Cords, LS0H PowerCat 6 RJ45 shielded F/UTP patch cords made from four pair 26 AWG stranded copper wire with an aluminium/polyester shield and a low smoke zero halogen (LS0H) sheath. The nominal outside diameter for these PowerCat 6 RJ45 patch cords is 6.3mm max. These PowerCat 6 RJ45 shielded patch cords are pre-terminated with an RJ45 plug with an anti-snag slip-on strain relief boot and are suitable for EIA 568A or 568B wiring.

PowerCat 6 RJ45 Shielded Patch Cords, LS0H PowerCat 6 RJ45 shielded F/UTP patch cords made from four pair 26 AWG stranded copper wire with an aluminium/polyester shield and a low smoke zero halogen (LS0H) sheath. The nominal outside diameter for these PowerCat 6 RJ45 patch cords is 6.3mm max. These PowerCat 6 RJ45 shielded patch cords are pre-terminated with an RJ45 plug with an anti-snag slip-on strain relief boot and are suitable for EIA 568A or 568B wiring.

PowerCat 6 RJ45 Shielded Patch Cords, LS0H PowerCat 6 RJ45 shielded F/UTP patch cords made from four pair 26 AWG stranded copper wire with an aluminium/polyester shield and a low smoke zero halogen (LS0H) sheath. The nominal outside diameter for these PowerCat 6 RJ45 patch cords is 6.3mm max. These PowerCat 6 RJ45 shielded patch cords are pre-terminated with an RJ45 plug with an anti-snag slip-on strain relief boot and are suitable for EIA 568A or 568B wiring.

PowerCat 6 RJ45 Shielded Patch Cords, LS0H PowerCat 6 RJ45 shielded F/UTP patch cords made from four pair 26 AWG stranded copper wire with an aluminium/polyester shield and a low smoke zero halogen (LS0H) sheath. The nominal outside diameter for these PowerCat 6 RJ45 patch cords is 6.3mm max. These PowerCat 6 RJ45 shielded patch cords are pre-terminated with an RJ45 plug with an anti-snag slip-on strain relief boot and are suitable for EIA 568A or 568B wiring.

PowerCat 6 RJ45 Shielded Patch Cords, LS0H PowerCat 6 RJ45 shielded F/UTP patch cords made from four pair 26 AWG stranded copper wire with an aluminium/polyester shield and a low smoke zero halogen (LS0H) sheath. The nominal outside diameter for these PowerCat 6 RJ45 patch cords is 6.3mm max. These PowerCat 6 RJ45 shielded patch cords are pre-terminated with an RJ45 plug with an anti-snag slip-on strain relief boot and are suitable for EIA 568A or 568B wiring.

PowerCat 6 RJ45 Shielded Patch Cords, LS0H PowerCat 6 RJ45 shielded F/UTP patch cords made from four pair 26 AWG stranded copper wire with an aluminium/polyester shield and a low smoke zero halogen (LS0H) sheath. The nominal outside diameter for these PowerCat 6 RJ45 patch cords is 6.3mm max. These PowerCat 6 RJ45 shielded patch cords are pre-terminated with an RJ45 plug with an anti-snag slip-on strain relief boot and are suitable for EIA 568A or 568B wiring.

Euromod™ Faceplates Faceplates which will accept Euromod™ socket modules for convenient wall, panel and trunk mounting. Single gang faceplates will take up two snap-in data sockets; double gang faceplates take up to four sockets. Faceplates are designed to mount on standard BS1363 pattresses. Fixing screws supplied with each plate.

Euromod™ Faceplates Faceplates which will accept Euromod™ socket modules for convenient wall, panel and trunk mounting. Single gang faceplates will take up two snap-in data sockets; double gang faceplates take up to four sockets. Faceplates are designed to mount on standard BS1363 pattresses. Fixing screws supplied with each plate.

Euromod™ Adaptor Collars Adaptor collars which will accept Euromod™ socket modules for convenient wall, panel and trunk mounting. They are snap-in mounting and offered as single or double socket versions.