Mueller Test Clip Insulators PVC insulator boots for various test clips. For test clip compatability please refer to table.

Mueller 10A Kelvin Clip with Gold Contacts 10A Kelvin clip with a gold contact and a current path for the source and circuit path for the sense. The length of this Kelvin clip is 57.91mm and the jaws open to 12mm maximum. The wire size accepted by this Kelvin clip is 20 AWG.

The BU-46M-* Clip was designed to thrive in coastal/marine environments. The solid copper and stainless steel construction provide excellent corrosion resistance. 75 Amps, 2.9″ Length, 1-1/8″ Jaw Opening,

Mueller Test Clip Insulators PVC insulator boots for various test clips. For test clip compatability please refer to table.

Mueller Test Clip Insulators PVC insulator boots for various test clips. For test clip compatability please refer to table.

Meuller Grabber Clip Grabber or plunger clips with a spring-loaded hook for attaching to delicate component leads and terminals. These grabber or plunger clips can connect to components with up to 0.060" diameter. The cap and body of these grabber clips are made from glass filled nylon with a stainless steel spring. Stock numbers <a href="/web/p/products/7148112">714-8112</a> and <a href="/web/p/products/7148121">714-8121</a> are 63mm in length and stock number <a href="/web/p/products/7148128">714-8128</a> are 88mm in length.

Mueller Insulated 15A Solderless Hex Design Banana Plug 15A insulated solderless banana plug with a nickel plated brass body, nickel-plated phosphor bronze spring and ABS insulator. This banana plug is 48.1mm in length with a hex and collet design to hold the plug to the insulator to enable wires to be held firmly within the plug.

Mueller Mini-Micro Grabber Clip Mini-Micro grabber or plunger clips with a spring-loaded hook for attaching to delicate component leads and terminals. These grabber or plunger clips can connect to components with up to 0.025" diameter. The cap and body of these grabber clips are made from durable nylon with a stainless steel spring.

Meuller Grabber Clip Grabber or plunger clips with a spring-loaded hook for attaching to delicate component leads and terminals. These grabber or plunger clips can connect to components with up to 0.060" diameter. The cap and body of these grabber clips are made from glass filled nylon with a stainless steel spring. Stock numbers <a href="/web/p/products/7148112">714-8112</a> and <a href="/web/p/products/7148121">714-8121</a> are 63mm in length and stock number <a href="/web/p/products/7148128">714-8128</a> are 88mm in length.

Mueller Insulated 15A Solderless Banana Plug 15A solderless banana plug with a nickel plated brass body, nickel-plated phosphor bronze spring and ABS insulator. This banana plug is 40.4mm in length and has a collet design enabling wires to be held firmly within the plug. Applicable wire size/type #18 AWG hook-up wire

Mueller Insulated 15A Solderless Banana Plug 15A solderless banana plug with a nickel plated brass body, nickel-plated phosphor bronze spring and ABS insulator. This banana plug is 40.4mm in length and has a collet design enabling wires to be held firmly within the plug. Applicable wire size/type #18 AWG hook-up wire

Meuller Small Angled Nose J.S. Popper Telecom Clip with Single Spike Small angled nose J.S. Popper telecom test clip with a single spike attached via a hexagonal screw. This telecom clip has corrosion resistant nickel silver jaws which open to a maximum of 25.4mm and is equipped with a single spike to pierce insulation. This telecom clip is 66.4mm in length and is supplied with a brass screw, nut and washer and a bronze star washer.