The Murrelektronik Limited unmanaged switch, full duplex, Ethernet connection or data traffic LED display. IP20 Degree of protectionCE, UKCA, cULus certified

Murrelektronik Limited Circular Connector The Murrelektronik Limited MOSA series is a 5-pole, cable mount male connector with a Socket type connection. The connector has a voltage rating of 250VAC/VDC and a current rating of 9A per contact. It has a plastic housing material with good resistance against chemicals and oils. The resistance to aggressive media should be individually tested for your application. Features and Benefits • Effective insulation• High durability• Industrial grade protection• Operating temperature ranges between -25°C and 85°C• Straight body orientation Applications • Electrical panels• Factory automation• Industrial machinery Certifications • ANSI/ESD S20.20:2014• BS EN 61340-5-1:2007• CRL certified• IP67 rated

Plastic housings with good resistance against chemicals and oils. The resistance to aggressive media should be individually tested for your application.

The Murrelektronik Limited MODLINK MSDD DBL combi insert. Snap in connector

The Murrelektronik Limited LED status light is an compact status light. IP65 degree of protection

MIRO TR DIN Rail Optocoupler MIRO TR Optocouplers are used to combine different signal levels or to isolate one signal from another. They provide an optoelectronic signal transfer between input and output, and therefore, never wear out. • DIN Rail mounting• Compact, 6.2 mm width• Made to last• No mechanical wear• Silent operation• No contact bounce times• Short switching times• Models with switching frequencies up to 500 kHz• Shock and vibration resistant• Low input power• LED (yellow) input display• Spring clamp or screw terminals

In areas where every component in a system comes into contact with the food being processed, then reenters the processing operation, the cordsets must be able to satisfy each and every cleanability requirement. The materials should neither absorb nor contaminate the product. The new M12 range from Murrelektronik, made of polypropylene, are therefore suitable for use in relevant zones. Produced from highly resistant and robust polypropyleneExtended temperature range of -40…+105 °CResistant to high-pressure cleanersIce blue jacket color helps identify any contaminationMetal parts made of V4A stainless steel (1.4404)ApplicationsZones 1 and 2Aseptic areas (H2O2) Average cleaning processesIntensive use of cleaning agents

MIRO TR DIN Rail Optocoupler MIRO TR Optocouplers are used to combine different signal levels or to isolate one signal from another. They provide an optoelectronic signal transfer between input and output, and therefore, never wear out. • DIN Rail mounting• Compact, 6.2 mm width• Made to last• No mechanical wear• Silent operation• No contact bounce times• Short switching times• Models with switching frequencies up to 500 kHz• Shock and vibration resistant• Low input power• LED (yellow) input display• Spring clamp or screw terminals

The Murrelektronik Limited Mico Pro endless plug in link used with MICO intelligent power distribution modules. Easy to use

MICO Classic Circuit Breaker The MICO Classic range by Murr Elektronik are an intelligent power distribution system for 24 V dc systems. MICO monitors currents and indicates via the LED when the maximum load is being approached, the current range can then be adjusted. If the current is ok the LED is green, when 90% of the selected current range is reached the LED blinks green. If there is a short circuit or the selected load is exceeded the LED blinks red and switch off the selected channel.Each channel can be individually switched on or off by the simple press of a button adding excellent flexibility.The MICO range has many advantages, including reduced risk of fire caused by overcurrents, and its ability to store operating statuses even after a power reset. Features and Benefits • Electronic current monitoring• 2 or 4 output channels• Adjustable current ranges• Spring clamp terminals• Bridge system on both sides• 90% warning notice with blinking LED• Group alarm contact (potential-free)• Cascading start of individual current paths• Space saving of up to 30% in a control cabinet Product Application Information Multiple MICO modules can be connected via the integrated bridging system, reducing both installation time and the potential for wiring errors.Spring clamp terminals enable installation in the shortest time possible. They are maintenance free and vibration resistant. Periodic maintenance to retighten screw terminals is no longer required

In areas where every component in a system comes into contact with the food being processed, then reenters the processing operation, the cordsets must be able to satisfy each and every cleanability requirement. The materials should neither absorb nor contaminate the product. The new M12 range from Murrelektronik, made of polypropylene, are therefore suitable for use in relevant zones. Produced from highly resistant and robust polypropyleneExtended temperature range of -40…+105 °CResistant to high-pressure cleanersIce blue jacket color helps identify any contaminationMetal parts made of V4A stainless steel (1.4404)ApplicationsZones 1 and 2Aseptic areas (H2O2) Average cleaning processesIntensive use of cleaning agents

7/8 Inch Flange Mount Connectors 7/8 flange mount bulkhead connectors from Murr Elektronik, 5 way male and female variants with 5 attached wires at 0.75 metres in length (brown, white, blue, black, green/yellow) AWG18 with PVC insulation. The connector contacts are rated to a maximum current capacity of 9A and an overall operating voltage of a maximum of 230/400 Vac/dc. These durable 7/8 bulkhead connectors have an IP67 rating when mated and have a PG13.5 mounting set. Operating voltage 230/400 Vac/dc max.Maximum current 9AIP67 once matedOperating temperature range -25 to +85 °C