The nPM1100 is an integrated Power Management IC (PMIC) with a linear-mode lithium-ion/lithium-polymer battery charger in a compact 2.1x2.1 mm WLCSP package. It has a highly efficient, dual-mode configurable output DC/DC buck regulator. It is compatible with all nRF52 and nRF53 Series SoCs and supports charging batteries at up to 500 mA through USB, and also delivers up to 150 mA of current to power external components with regulated voltage. USB interfaceUltra-high efficiency prolongs battery life or allows for use of smaller and less costly batteriesNo software control

The Nordic Semiconductor Power Management IC (PMIC) is designed compatible with an nRF52, nRF53, or nRF54 Series System on Chip (SoC) for developing low-power wireless solutions. The power management is achieved through flexible power regulation and a linear-mode lithium-ion (Li-ion), lithium-polymer (Li-poly), and lithium iron phosphate (LiFePO4) battery charger in a compact 3.1x2.4 mm WLCSP package. It is optimized for maximum efficiency and compact size, and is configurable through an I2C compatible Two Wire Interface (TWI). This interface enables easy access and configure a range of advanced system management functions, including a two-button hard reset, battery fuel gauging, system-level watchdog, power loss warning, and recovery from failed boot. System-level watchdog and failed-boot recoveryIntelligent power-loss warningControlled via I2C compatible TWIUSB-C compatibleReel packaging

The Nordic Semiconductor nRF5340 is a wireless Bluetooth 5.2 system-on-chip with two Arm CortexM33 processors, supporting Bluetooth low energy, Bluetooth mesh, thread and ZigBee wireless protocols. The SoC supports an extensive range of wireless protocols. It also supports protocols such as NFC, ANT, 802.15.4, and 2.4 GHz proprietary. Coupling the high-performance processor with the generous 512 KB RAM, makes the SoC ready for the next generation of advanced wearables and smart watches. It is affordable and has everything needed for development on a single board. High-performance application processor Bluetooth Low Energy o Bluetooth 5.2 Bluetooth mesh Thread, Zig Bee and 802.15.4 Trusted execution with Arm Trust Zone

The Nordic Semiconductor Wi-Fi 6 companion highly integrated IC is designed to enable the integration of Wi-Fi 6 connectivity into a wide variety of applications. This IC provides a low power and cost-effective solution for adding the latest Wi-Fi 6 technology to products, allowing them to benefit from high speeds, improved range, and greater reliability offered by the latest Wi-Fi standard. Low-power and secure Wi-Fi for the IoTIdeal coexistence with Bluetooth LESupported in nRF Connect SDKTarget Wake Time (TWT)WPA3 Personal/EnterpriseSPI or QSPIWi-Fi 6 Station (STA)1 Spatial Stream (SS)64 QAM (MCS7), 86 Mbps PHY throughputOFDMA (Downlink and Uplink)BSS colouringCo-existence interfaces

The Nordic Semiconductor integrated Power Management IC (PMIC) has a linear-mode lithium-ion or lithium-polymer battery charger with high terminal voltage in a compact 2.1x2.1 mm WLCSP package. It has a highly efficient DC/DC buck regulator with configurable dual mode output. The nPM1100 is an extremely compact PMIC device, created for space constrained applications that have a small lithium-ion or lithium-polymer battery. It is compatible with all nRF52 and nRF53 Series SoCs, supports charging batteries at up to 400 mA through USB, and delivers up to 150 mA of current to power external components with regulated voltage. Ultra-high efficiency prolongs battery life or allows for use of smaller and less costly batteriesSmall solution size leaves space for additional features without increasing product sizeNo software controlAutomatic USB port detection minimizes development timeReel packaging

The Nordic Semiconductor integrated Power Management IC (PMIC) has a linear-mode lithium-ion or lithium-polymer battery charger with high terminal voltage in a compact 2.1x2.1 mm WLCSP package. It has a highly efficient DC/DC buck regulator with configurable dual mode output. The nPM1100 is an extremely compact PMIC device, created for space constrained applications that have a small lithium-ion or lithium-polymer battery. It is compatible with all nRF52 and nRF53 Series SoCs, supports charging batteries at up to 400 mA through USB, and delivers up to 150 mA of current to power external components with regulated voltage. Ultra-high efficiency prolongs battery life or allows for use of smaller and less costly batteriesSmall solution size leaves space for additional features without increasing product sizeNo software controlAutomatic USB port detection minimizes development timeReel packaging

The Nordic Semiconductor wireless companion IC is featured with adding low-power Wi-Fi 6 capabilities to another System on Chip(SoC), Memory Protection Unit (MPU), or Microcontroller Unit (MCU) host. It is designed for IoT applications, and is ideal for adding modern Wi-Fi 6 capabilities to existing Bluetooth Low Energy, Thread or Zigbee systems. It has 6x6 mm QFN48 package. Supports IEEE 802.11 ax and earlier standards (IEEE 802.11 b/g/n)Supports Target Wake Time (TWT), Orthogonal Frequency Division Multiple Access (OFDMA), Basic Service Set (BSS) ColoringSupports Wi-Fi CERTIFIED 6 Wi-Fi CERTIFIED, Wi-Fi Enhanced OpenSupports WPA3, WPA2, WPA- Personal and Enterprise, Protected Management FramesSupports WMM, WMM - Power Save, Wi-Fi Agile Multiband, Wi-Fi DirectMaximum output power 21 dBmSingle-band 2.4 GHzSPI or QSPI host interface, 3-wire or 4-wire coexistence interface

The Nordic Semiconductor Power Profiler Kit II Current measurement tool for embedded development. It is a standalone kit that can measure and supply currents as low as 1 uA and as high as 1A on all Nordic development kits in addition to external designs. It also supports 8 digital inputs that can be used as a low-end logic analyser. It has 10x quicker sampling compared with our previous generation, leading to higher bandwidth and the ability to have a continuous real time measurement window. Enables power profiling and supply of Nordic Semiconductor development kits in addition to custom hardware Measures and supplies currents between 1 uA and 1A 10x quicker sampling compared with the previous generation, 100 ksps Power supply and ampere meter modes

The Nordic Semiconductor Rapid prototyping platform is based on the nRF5340 System on-Chip (SoC), our current flagship dual-core wireless SoC. With integrated sensors for motion, sound, light and environmental factors, it is the perfect platform for building proof-of-concepts and developing new prototypes in a very short time. Battery powered prototyping platform forthe nRF5340 SoCSupport for multiple wireless standards,Bluetooth LE/Thread/ZigbeenRF Edge Impulse mobile app forembedded machine learningnRF Programmer mobile app for easilyflashing firmware on the goUser-programmable buttons and RGB LEDEnvironmental sensor for temperature,humidity, air quality and air pressureColour and light sensorLow-power accelerometer and 6-axisinertial measurement unit (IMU)Buzzer and PDM microphoneConnector for additional external boardsand accessoriesExternal debug and current measurementboardUSB-C rechargeable 1350 mAh Li-Po battery

The nRF52820 System-on-Chip (SoC) is the 6th addition to the industry-leading nRF52 series. It augments the already extensive collection of wireless SoCs with a lower-end option with built-in USB and a fully-featured multiprotocol radio. The nRF52 series is truly the ideal platform for basing a product portfolio upon. The common hardware and software architecture results in excellent software portability, increasing software reusability and lowering time-to-market and development cost. 64 MHz Arm Cortex-M4256 KB Flash + 32 KB RAMBluetooth Low EnergyBluetooth meshThread and ZigBee (802.15.4)Ultra-low-power 2.4 GHz multiprotocol radio12 Mbps Full Speed USB 2.0Integrated DC/DC regulatorExtended temperature range: -40°C to +105°C1.7-5.5 V supply voltage range

The nRF52810 is the baseline member of the nRF52 Series SoC family. It meets the challenge of bringing Bluetooth 5 feature sets and protocol concurrency to applications at a price point that makes adding Bluetooth 5 connectivity to an application compelling. It is an ideal candidate for less complex applications and also as a Bluetooth 5 connectivity processor in larger applications. The nRF52810 has protocol support for Bluetooth 5, ANT and 2.4 GHz proprietary stacks. It is extremely power efficient, and is our smallest SoC with its 2.482 x 2.464 mm CSP package. 64 MHz Cortex-M4192 KB Flash, 24 KB RAM2.4 GHz Transceiver2 Mbps, 1 MbpsBluetooth 5ANT+4 dBm TX Power128-bit AES CCMUART, SPI, TWI, PDM PWM12-bit ADC

The nRF52811 is a Bluetooth 5.1 SoC with comprehensive protocol support. It is the 4th addition to the nRF52 Series platform, extending the numerous applications and use cases already covered by the platform. The nRF52811 SoC is capable of the latest and greatest features of Bluetooth 5.1, the most prominent being Direction Finding, taking Bluetooth positioning to new heights. 64 MHz Cortex-M4192 KB Flash, 24 KB RAM2.4 GHz Transceiver2 Mbps, 1 Mbps, Long RangeBluetooth 5.1 Direction FindingANT, 802.15.4, Thread, Zigbee+4 dBm TX Power128-bit AES CCMUART, SPI, TWI, PDM PWM12-bit ADC