IMI Norgren Rear Hinge, 63mm Bore Size - QA Series - QA/8063/24 For the smooth movement of your pneumatic cylinders in dynamic settings, choose this hinge assembly from IMI Norgren. Its components are made of durable metal that's resistant to wear and corrosion, so it's suitable for use in harsh environments. The assembly consists of a mounting block and a movable clevis that enable your cylinder to make oscillatory movements, so it's useful in lifting applications and vibrating systems. You can use a simple Allen key to install this unit, saving time and eliminating the need for complex tooling. Features & Benefits • Supplied with pre-drilled holes for quick and simple installation• Compatible with lubricants and bearings to reduce friction• Designed to fit 63mm bore size cylinders for heavy-duty applications• Light weight of 360g for easy handling during installation Applications • Robotics and automation• Construction equipment• Lifts and escalators What precautions should I take when installing this hinge assembly? When installing this assembly, it's important to check the load rating of the cylinder and ensure it's in the range that the mounting unit can handle. Overloading the hinge may cause it to fail, leading to system downtime.

IMI Norgren Pneumatic Fitting, M16 Thread, Nickel-Plated Brass - PNEUFIT Series - 100490800 DIS Need a trusty middleman to link pipes to tubes in your pneumatic systems? Choose this fitting from IMI Norgren. It has a push-in adapter on one end for quick and tool-free installation of air tubes. On the other end, you'll find an M16 connector to join it with threaded pipes. The L-shaped design comes in handy when you want to change the direction of the air transmission in tight setups. Thanks to the unit's nickel-plated brass body, it can withstand rust and corrosion to deliver long-term performance in harsh environments. Features & Benefits • Maximum operating pressure of 18 bar for use in heavy-duty applications• Integrated O-ring prevents contamination and leakages to ensure optimal performance• Push-in connector size of 6mm for small-sized tubes Applications • Oil and gas industry• High-pressure and low-pressure compressors• Water treatment plants What's the operating temperature range of this pneumatic fitting? This unit performs at its best in a temperature range between -20°C and +80°C, making it a dependable choice for tough conditions. What tool should I use to fasten the threaded end of this fitting to pipes? To secure this piece of kit to pipes, use a simple size-22 spanner.

IMI Norgren Pneumatic Piston Rod Cylinder, 267mm Length, Stainless Steel Material - ISOLine Series - PRA/802032/M/125 Get precision control over air tools and industrial equipment with this pneumatic piston rod cylinder from IMI Norgren. It features adjustable cushioning that prevents impact and wear to prolong the life of your system. Thanks to the oil-resistant polyurethane seals, lubricant stays in and debris is shut out, for efficient operation. This unit has a wide operating pressure range of 1 to 12 bar, so it's suitable for use in light-duty and medium-duty applications. Features & Benefits • Stainless steel piston rod is resistant to impact and corrosion• Broad operating temperature range between -20°C and +80°C for use in demanding environments• G1/8 port size for compatibility with standard pneumatic components Applications • Automation equipment• Manufacturing facilities• Packaging systems• Transportation applications Can I add an operating switch to this product? Yes, you can easily add a switch (363-3316) to this unit by mounting it flush with the barrel's profile. What does the ACS adaptive cushioning system do? This cylinder's ACS function automatically adjusts the cushioning according to changes in load and pressure. This means there's no need for manual adjustment, saving you time and effort.

IMI Norgren Pneumatic Fitting, Straight Orientation, 25.5mm Length - Pneufit C Series - C02250638 Connect cylinders and tubing in a snap with this pneumatic fitting from IMI Norgren. It combines a G3/8 male threaded end with a 6mm push-in connection in a straight body orientation, making it a piece of cake to install without specialised tools. Once connected, the unit can handle a broad operating pressure range of -0.9 to 10 bar, making it just the thing for medium-duty applications. NBR seals are on hand to stop debris in its tracks, meaning your system stays as clean as a whistle. Features & Benefits • Wide operating temperature range between -20°C and +60°C for use in demanding environments• Nickel-plated brass thread is corrosion-resistant to extend the unit's service life• PBT body brushes off impact and wear for use in harsh industrial settings• Light weight of 30g to put minimal strain on your equipment Applications • Manufacturing facilities• Robotics systems• Aerospace engineering• Food and beverage processing What type of tubing can I use with this fitting? Quickly assemble your system by connecting this unit to a durable 6mm PA hose (such as 218-0638) or PUR tubing (such as 218-0673).

IMI Norgren Rear Hinge, 40mm Cylinder Diameter, Wide Hinge Style - M/P194 Series - M/P19494 Looking for a way to boost stability in your pneumatic setup? Reach for this rear hinge from IMI Norgren to support your equipment from the sidelines. Thanks to its sturdy base, it's a solid choice that holds things steady in high-vibration environments. You simply screw it down on a flat surface using the pre-drilled holes, so there's no need for specialist equipment to get it set up. This assembly pairs seamlessly with ISO/VDMA cylinders with a 40mm diameter, such as RS PRO's pneumatic piston rod cylinder (480-2197) or RS PRO's 100mm stroke pneumatic piston rod cylinder (480-2204). Features & Benefits • Hard-wearing metal material resists impacts, abrasion and mechanical stress to deliver a long service life• Rounded edges with a smooth finish for safe handling• Compact dimensions of 24 (H) x 54 (W) x 35mm (D), so slots neatly into tight areas Applications • Cooling lines• Mining and minerals processing• Industrial automation How much does this component weigh? This rear hinge only weighs 70g, so it's a lightweight choice that doesn't add unnecessary load to your setup.

IMI Norgren Sub Base, Aluminium Body, G1/2 Thread - SXE Series - M/P19138 Keep things simple in your pneumatic network with this sub base from IMI Norgren. It spreads a single air supply between five different valves, so it's a handy way to streamline your system. With compact dimensions of just 50 (H) x 110 (L) x 25mm (W), this device saves space too. Thanks to a standardised G1/2 thread size, you can be sure this sub base is compatible with your existing devices. Screw-in connectors make setting up a breeze. Features & Benefits • Side-port configuration gives easy access for hassle-free installation and maintenance• Low 353g weight adds minimal strain to your system• Operating temperature range between -15°C and +80°C when used with a product from IMI Norgren's SXE or SXP range so it's ideal for industrial settings• Nitrile rubber seals give a sturdy defence against leaks Applications • Food and beverage processing• Medical equipment• Distribution hubs What's this product made from? This sub base is made from high-strength aluminium so it's robust and long-lasting. This metal is also corrosion-resistant, for a long service life even in damp conditions. To achieve peak performance, make sure your air supply is dry enough to avoid ice formation if the temperature drops below +2°C.

IMI Norgren Pneumatic Silencer, Plastic, 84dB Sound Pressure Level - M/S Series - M/S2 Use this pneumatic silencer from IMI Norgren to reduce the vented air released from the exhaust port of your pneumatic system. It also catches contaminants to prevent them from blocking the port. The unit's made from UHMW PE porous plastic that's resistant to solvents and cracking so you can rely on it to withstand demanding conditions. The sound pressure level of 84dB, roughly equal to the noise of a diesel truck, is lower than the NIOSH REL limit of 85dB for safe occupational noise exposure in your workplace. Features & Benefits • Operating pressure range between 1 and 10 bar for use in low-pressure environments• PE connector base is impact-resistant for durable performance• Broad operating temperature range between -20°C and +80°C to withstand harsh industrial settings Applications • Hydraulic equipment• Water treatment plants• Laboratories• Chemical plants How do I mount this silencer? You can mount this pneumatic silencer by inserting it directly into the exhaust port of your equipment. Thanks to its threaded inlet connection, you can install it without the need for any tools. The compact tube inlet connection of 0.25in means you can easily fit it into smaller setups.

IMI Norgren Flow Controller, PBT Material, 30g Weight - PNEUFIT C Series - C0TA00618 Keep compressed airflow in your pneumatic system in check with this flow controller from IMI Norgren. It has an adjustment lock that prevents you from accidentally making any unintended changes to the settings of your equipment. As the body is made from PBT, it stands fast against mechanical impact and chemicals to deliver long-lasting service in demanding conditions. A maximum operating pressure range of up to 10 bar, means you can depend on this unit to perform without a glitch in heavy-duty applications. Silicone-free NBR seals shut the door to leaks and external contaminants, to maintain pressure and keep your air supply clean. Features & Benefits • Simple, tool-free installation and disassembly saves time and effort• 6mm tube inlet and outlet ports for use with smaller tubes• Safe to use in challenging conditions, thanks to an operating temperature between 0°C and +60°C• R1/8 thread size for easy and secure fitting to standard components Applications • Industrial processing equipment• Automotive industry• HVAC systems• Analytical instruments How heavy is this component? This flow controller weighs just 30g, so it's easy to handle and doesn't cause any strain on your setup.

IMI Norgren Pneumatic Solenoid Valve, Inline Mounting, 100% Duty Cycle - V60 Series - V60A417A-A213J Add this IMI Norgren pneumatic solenoid valve to your compressed air system to get reliable airflow control. The solenoid technology means you can remotely manage the opening and closing of the unit, saving you legwork. It's got the muscle for demanding tasks, thanks to a 750L/min flow rate. Pressure is maintained by corrosion-resistant NBR seals to give contaminants the cold shoulder. The unit's made from robust die-cast aluminium alloy, so handles impacts and abrasion to deliver a long service life in challenging environments. Features & Benefits • Operating pressure between 2 and 10 bar is ideal for low-pressure jobs• Industry-standard G1/8 port size for wide compatibility with pneumatic equipment• NC function suits safety-critical applications as the default state is closed• Light 0.22kg weight keeps load low Applications • Industrial automation• Material handling• Laboratory equipment Is this product protected from contaminants and moisture? Once installed, this pneumatic solenoid valve has an IP65 rating, which means it's completely dust-tight and protected from water jets from all directions. Can I use this device in harsh conditions? Yes. This assembly performs reliably in temperatures between -10°C and +50°C, so it's suited to harsh conditions. In temperatures lower than +2°C, make sure the media is dry enough to prevent ice formation.

IMI Norgren Pneumatic Solenoid Valve, Inline Mounting, 5/2 Way - V60 Series - V60A517A-A213J Control the flow of air in your pneumatic system using this pneumatic solenoid valve from IMI Norgren. It directs airflow through five different ports by moving in two directions. As the unit's actuated by a solenoid, it's powered by an electrical coil that transmits current to the internal poppet mechanism to open or close the valve. A built-in spring mechanism automatically returns it to its original position, eliminating the need for a manual reset. Thanks to die-cast aluminium-alloy housing, this device is resistant to corrosion, so you can be sure of long-term use in harsh conditions. Features & Benefits • Wide operating temperature range between -10°C and +50°C to withstand harsh environments• Push manual override for quick stopping in emergency situations• Robust NBR seal is resistant to oils and solvents for durability• G1/8 threaded connection allows for tool-free mounting Applications • Food and beverage production• Manufacturing facilities• Medical technology• Agricultural equipment What's the operating pressure rating of this solenoid valve? This pneumatic solenoid valve has an operating pressure range between 3 and 10 bar, making it suitable for low-pressure to medium-pressure applications.

IMI Norgren Compressed Air Pipe, 4mm ID, 9 Bar Maximum Pressure - PU2 Series - PU2-0006025C When you need a strong and flexible hose for your pneumatic system, go for this translucent compressed air pipe from IMI Norgren. As it can handle pressures of up to 9 bar, it's a robust choice for demanding jobs. The high-strength polyurethane material is resistant to abrasion, tears and impacts, and shrugs off common contaminants like oil and grease with ease. This means you can expect a long service life from this product even in challenging industrial settings. Thanks to the generous 25m length, you'll have plenty of tubing to make unbroken connections over long distances. Alternatively, you can easily cut it to the exact size you need. Features & Benefits • Wide operating temperature range between -40°C and +60°C means it's compatible with challenging conditions• Supplied in a protective carton to make storage a breeze• Light-stabilised to protect against UV degradation for maximum durability Applications • Aeronautical engineering• Food manufacturing• Chemical production Is this hose flexible enough for use in confined spaces? It certainly is. With a minimum bend radius of just 9mm, the air pipe will easily loop without kinking even in the tightest of spots.

IMI Norgren Pneumatic Solenoid Valve, 10 Bar Maximum Operating Pressure, Manifold Mounting - SXE Series - SXE9574-A81-00/24V= Get your airflow heading in the right direction with this pneumatic solenoid valve from IMI Norgren. It has a flow rate of up to 2,450L/min, so it's ideal for any system that needs to fill or exhaust a chamber as efficiently as possible. An anodised aluminium spool and sleeve, along with heat-resistant nitrile seals, ensure the valve stands up to the rigours of demanding industrial applications. Features & Benefits • Wide operating temperature range between -15°C and +50°C, for use in demanding environments• Push and turn-to-lock manual override prevents accidental shutdown• Universal ISO 2 base size means it fits neatly into existing systems• IP65 rating means it's dust-tight and resistant to water jets from any angle Applications • Packaging machines• Materials handling• Robotics systems• Processing equipment Is this pneumatic solenoid valve monostable or bi-stable? A monostable design means the valve returns to its resting state when not in use. This type of valve delivers a fast response time, making it suitable for applications needing quick and precise control. It also generates minimal heat, which reduces energy consumption and wear on internal parts.