Plastic Floats for use with Part 1 and Part 2 Valve Bodies

Bronze Globe Valves PN32 Series B A range of bronze globe valves, individually hydrostatically tested to BS 5154 at the following test pressures: Shell: 48 bar, Seat: 35.2 bar<BR/>Rising Stem<BR/>Threaded bonnet<BR/>Renewable disc which is suitable for steam service<BR/>Bronze trim with glass filled PTFE disk<BR/>BS21 Taper thread (ISO 7)

Bronze Globe Valves PN32 Series B A range of bronze globe valves, individually hydrostatically tested to BS 5154 at the following test pressures: Shell: 48 bar, Seat: 35.2 bar<BR/>Rising Stem<BR/>Threaded bonnet<BR/>Renewable disc which is suitable for steam service<BR/>Bronze trim with glass filled PTFE disk<BR/>BS21 Taper thread (ISO 7)

Bronze Globe Valves PN32 Series B A range of bronze globe valves, individually hydrostatically tested to BS 5154 at the following test pressures: Shell: 48 bar, Seat: 35.2 bar<BR/>Rising Stem<BR/>Threaded bonnet<BR/>Renewable disc which is suitable for steam service<BR/>Bronze trim with glass filled PTFE disk<BR/>BS21 Taper thread (ISO 7)

Plastic Floats for use with Part 1 and Part 2 Valve Bodies

Pegler Yorkshire Float Valve The Pegler Yorkshire Portsmouth pattern float valve has a connection size of 3/4in. It is designed with interchangeable parts for easy replacement. This device has a valve size of 0.5 psi with a lever thread size of 5/16in. These float valves are suitable for pressures up to 14bar (206 psi).<BR/>Note:<BR/>Minimum working pressure for 1in valve size is 0.5 psi. Floats not supplied with these valves. Features and Benefits Temperature range 0°C to 85°C<BR/>Maximum pressure 14bar (200 psi)<BR/>Body material is made of brass Applications Dryers<BR/>Drying tunnels<BR/>Heater fans<BR/>Static batteries

Washing Machine Tap Chromium plated brass, all components WRC listed<BR/>Pressure rating 16 bar at 30°C, 10 bar at 65°C, 6 bar at 110°C (test 20 bar)<BR/>Straight and tee pattern quarter turn isolating valves for use on hot and cold water systems<BR/>Flow rate 0.16 l/s<BR/>A red and blue plastic operating handle is included with each valve<BR/>Manufactured to the performance standards of BS6675

Drain Cock with Lockshield Head Brass drain cock with gland seal on spindle<BR/>Type A BSI kitemark approved. License no 3969<BR/>Manufactured to BS2879/2<BR/>BSP Taper Thread complies with BS21<BR/>Maximum working pressure 20 bar at 120°C

Elbow Compression to Female BSP Parallel Thread

Float Valve-BS1212: Part2 WRC approved<BR/>Rubber diaphragm<BR/>Discharge above overflow level prevents back siphonage - meets requirements of Byelaw 42<BR/>No hiss or prolonged shut-off noise<BR/>Thumbscrew on lever provides vertical and horizontal adjustment of float<BR/>Designed for use with a 4 1/2 in plastic float<BR/>Pressure rating 14 bar

Floatvalve Nylon Seat BS 1212 Part one high pressure Designed with interchangeable parts to make replacement easy<BR/>Temperature range 0°C to 85°C<BR/>Maximum pressure 14 bar (200 psi)

Chromium Plated Brass Servicing Valve WRC approved<BR/>Brass chromium plated reduced bore ball valves manufactured to BS6675<BR/>Used for isolating hot or cold water systems, to carry out repairs or replacements, without affecting the rest of the system and without having to drain down large volumes of stored water<BR/>Pressure rating 16 bar at 30°C (cold), 5 bar at 120°C (hot)