RawlPlug R-XPT Masonry Mechanical Anchor Throughbolt Fixing. From RawlPlug this is the R-XPT Throughbolt mechanical anchor fixing a high performance and high-quality fixing for use in non-cracked concrete approved to ETA Option 7. The throughbolt fixing has a 6-grip feature design giving you high load-bearing capacity plus the cold-formed body ensures dimensional accuracy. It is easy to install allowing you to drill and install directly through the fixture plus it has depth markings ensuring precise installation and suitable for reduced embedment. Features and Benefits. R-XPT Mechanical Anchor Throughbolt Plug Fixing.For non-cracked concrete.Approval ETA Option 7.Suitable for reduced embedment (avoiding contact with the reinforcement).Embedded depth marking (assisting precise anchor installation).Drill and install directly through the fixing.Cold formed body (dimensional accuracy).Easy through installation (drill installation through fixed material).6-Grip feature expander design (high-load bearing capacity).High Quality and performance.Cost effective.Simple and easy to use. Typical R-XPT Throughbolt Plug Anchor Fixings Applications. Cladding restraint.Curtail wall.Balustrading.Barriers.Handrails.Racking.Structural Steel.Bollards. Material the R-XPT Throughbolt Screw Thread Anchors Fixings are Compatible with? Approved for use in: Non-Cracked concrete C20/25-C50/60.Unreinforced concrete.Reinforced concrete.Natural stone (must first be site tested).Not suitable for Cavity wall or plasterboard wall fixing. R-XPT Throughbolt Screw Bolt Anchor Fixings Available? Stock number 530539, Threaded 8 mm, 8 mm x 50 mm.Stock number 6816750, Threaded 8 mm, 8 mm x 65 mm.Stock number 530545, Threaded 8 mm, 8 mm x 85 mm.Stock number 4833668, Threaded 8 mm, 8 mm x 115 mm.Stock number 7362579. Threaded 10 mm, 10 mm x 80 mm.Stock number 7362572, Threaded 10 mm, 10 mm x 95 mm.Stock number 7362576, Threaded 10 mm, 10 mm x 115 mm.Stock number 7362585, Threaded 10 mm, 10 mm x 130 mm.Stock number 530595, Threaded 12 mm, 12 mm x 80 mm.Stock number 530602, Threaded 12 mm, 12 mm x 100 mm.Stock number 6816757, Threaded 12 mm, 12 mm x 120 mm.Stock number 7362588, Threaded 12 mm, 12 mm x 135 mm.Stock number 7362582, Threaded 12 mm, 12 mm x 140 mm.Stock number 7362591, Threaded 12 mm, 12 mm x 150 mm.Stock number 530539, Threaded 8 mm, 8 mm x 50 mm.Stock number 530630, Threaded 16 mm, 16 mm x 180 mm.Stock number 530646, Threaded 16 mm, 16 mm x 220 mm. Stock number 1542488, Threaded 10 mm, 10 mm x 80 mm.Stock number 1542489, Threaded 10 mm, 10 mm x 140 mm.Stock number 1542490, Threaded 12 mm, 12 mm x 100 mm.Stock number 1542491, Threaded 12 mm, 12 mm x 125 mm.Stock number 1542492, Threaded 12 mm, 12 mm x 140 mm.Stock number 1542493, Threaded 12 mm, 12 mm x 180 mm.Stock number 1542494, Threaded 16 mm, 16 mm x 105 mm.Stock number 1542495, Threaded 16 mm, 16 mm x 140 mm. How to use the R-XPT Throughbolt Fixing Anchors? Drill a hole (have pre-drilled hole ready) ensure that it is the correct diameter and depth needed.Clean out the drilled hole removing all debris and dust (important to thoroughly remove everything, use a blow-pump).Gently tap the thoughbolt into the fixture until the correct fixing depth is reached.Tighten the fixing carefully, only to the recommended torque.

RawlPlug R-XPT Masonry Mechanical Anchor Throughbolt Fixing. From RawlPlug this is the R-XPT Throughbolt mechanical anchor fixing a high performance and high-quality fixing for use in non-cracked concrete approved to ETA Option 7. The throughbolt fixing has a 6-grip feature design giving you high load-bearing capacity plus the cold-formed body ensures dimensional accuracy. It is easy to install allowing you to drill and install directly through the fixture plus it has depth markings ensuring precise installation and suitable for reduced embedment. Features and Benefits. R-XPT Mechanical Anchor Throughbolt Plug Fixing.For non-cracked concrete.Approval ETA Option 7.Suitable for reduced embedment (avoiding contact with the reinforcement).Embedded depth marking (assisting precise anchor installation).Drill and install directly through the fixing.Cold formed body (dimensional accuracy).Easy through installation (drill installation through fixed material).6-Grip feature expander design (high-load bearing capacity).High Quality and performance.Cost effective.Simple and easy to use. Typical R-XPT Throughbolt Plug Anchor Fixings Applications. Cladding restraint.Curtail wall.Balustrading.Barriers.Handrails.Racking.Structural Steel.Bollards. Material the R-XPT Throughbolt Screw Thread Anchors Fixings are Compatible with? Approved for use in: Non-Cracked concrete C20/25-C50/60.Unreinforced concrete.Reinforced concrete.Natural stone (must first be site tested).Not suitable for Cavity wall or plasterboard wall fixing. R-XPT Throughbolt Screw Bolt Anchor Fixings Available? Stock number 530539, Threaded 8 mm, 8 mm x 50 mm.Stock number 6816750, Threaded 8 mm, 8 mm x 65 mm.Stock number 530545, Threaded 8 mm, 8 mm x 85 mm.Stock number 4833668, Threaded 8 mm, 8 mm x 115 mm.Stock number 7362579. Threaded 10 mm, 10 mm x 80 mm.Stock number 7362572, Threaded 10 mm, 10 mm x 95 mm.Stock number 7362576, Threaded 10 mm, 10 mm x 115 mm.Stock number 7362585, Threaded 10 mm, 10 mm x 130 mm.Stock number 530595, Threaded 12 mm, 12 mm x 80 mm.Stock number 530602, Threaded 12 mm, 12 mm x 100 mm.Stock number 6816757, Threaded 12 mm, 12 mm x 120 mm.Stock number 7362588, Threaded 12 mm, 12 mm x 135 mm.Stock number 7362582, Threaded 12 mm, 12 mm x 140 mm.Stock number 7362591, Threaded 12 mm, 12 mm x 150 mm.Stock number 530539, Threaded 8 mm, 8 mm x 50 mm.Stock number 530630, Threaded 16 mm, 16 mm x 180 mm.Stock number 530646, Threaded 16 mm, 16 mm x 220 mm. Stock number 1542488, Threaded 10 mm, 10 mm x 80 mm.Stock number 1542489, Threaded 10 mm, 10 mm x 140 mm.Stock number 1542490, Threaded 12 mm, 12 mm x 100 mm.Stock number 1542491, Threaded 12 mm, 12 mm x 125 mm.Stock number 1542492, Threaded 12 mm, 12 mm x 140 mm.Stock number 1542493, Threaded 12 mm, 12 mm x 180 mm.Stock number 1542494, Threaded 16 mm, 16 mm x 105 mm.Stock number 1542495, Threaded 16 mm, 16 mm x 140 mm. How to use the R-XPT Throughbolt Fixing Anchors? Drill a hole (have pre-drilled hole ready) ensure that it is the correct diameter and depth needed.Clean out the drilled hole removing all debris and dust (important to thoroughly remove everything, use a blow-pump).Gently tap the thoughbolt into the fixture until the correct fixing depth is reached.Tighten the fixing carefully, only to the recommended torque.

The Anglian Fasteners Disinfectant spray is a universal disinfectant spray with antiviral and antibacterial activities. It is used for disinfection of walls and floors in private, public and industrial spaces, material surfaces, sanitary facilities and toilets, screens, computers, keyboards, phones. Complies with the WHO recommendationsContains pharmaceutical glycerineContains 88% of ethanol

RawlPlug R-RBL Rawlbolt™ Mechanical Shield Anchor Loose Bolt. From RawlPlug this is the R-RBL Rawlbolt all-purpose expanding mechanical anchor loose bolt which is for use with hollow core slab and ceramic material. The RawlPlug Rawlbolt is the original mechanical anchor with all others produced after the Rawlbolt launch. The sleeve of the rawlbolt is expanding, in 3-pieces providing you with maximum safety and optimal load and can be used in any material. Various diameter of Rawlboth are available from M6 to M20 and the R-RBL is mainly for use in cracked and con-cracked concrete (ETA option 1), hollow core slabs, flooring blocks and ceramics. This mechanical shield anchor loose bolt is truly all purpose making it one of the most popular loose bolts available. Features and Benefits. R-RBL Rawlbolt Mechanical Shield Anchor.Loose bolt.All-purpose.Expanding (3-pieces).Maximum safety and optimal load.Diameters available from M6 to M20.For use in any substrate.For use in cracked and non-cracked concrete (ETA option 1), hollow core slabs, flooring blocks and ceramics. Typical R-RBL Rawlbolt Mechanical Shield Anchor Loose Bolt Fixings Applications. Roller shutter doors.Fire doors.Structural steel work.Security grills.Heavy machinery.Pipework and ductwork supports. Material the R-RBL Rawlbolt Loose Bolt Anchors are Compatible with? Approved for use in: Solid clay brick ≥ 20MPa.Hollow Lightweight Concrete Block LAC 5 ≥ 5MPa. Hollow Sand-lime Brick ≥ 15MPa. Concrete hollow floor block (Teriva). Hollow-core Slab C20/25.Hollow-core Slab C30/37-C50/60. R-RBL Rawlbolt Loose Bolt Anchors Fixings Available? Stock number 279004, Steel, M6, 12 mm x 85 mm.Stock number 279010, Steel, M8, 14 mm x 95 mm.Stock number 279026, Steel, M10, 16 mm x 115 mm.Stock number 279032, Steel, M12, 20 mm x 120 mm.Stock number 525329, Steel, M6, 12 mm x 55 mm.Stock number 525335, Steel, M8, 14 mm x 65 mm.Stock number 525341, Steel, M10, 16 mm x 75 mm.Stock number 525420, Steel, M10, 16 mm x 90 mm.Stock number 528249, Steel, M6, 12 mm x 70 mm.Stock number 528255, Steel, M8, 14 mm x 80 mm.Stock number 528261, Steel, M12, 20 mm x 90 mm.Stock number 528277, Steel, M12, 20 mm x 105 mm.Stock number 6816713, Steel, M10, 16 mm x 140 mm.Stock number 6816722, Steel, M12, 20 mm x 140 mm.Stock number 6816725, Steel, M16, 25 mm x 135 mm.Stock number 6816729, Steel, M16, 25 mm x 150 mm. How to use the R-RBL Rawlbolt Loose Bolt Anchors? Drill a hole (have pre-drilled hole ready) ensure that it is the correct diameter and depth needed.Clean out the drilled hole removing all debris and dust (important to thoroughly remove everything, use a blowpump).Remove the pre-assembled bolt and washer.Insert the shield into the drilled hole and gently tap into the hole till it is flush with the surface.Insert the bolt with the washer through the fixture and into the shield.Tighten the fixing carefully, only to the recommended torque.

RawlPlug SM Interset™ Cavity Wall Plug Fixings. From RawlPlug this is the SM Interset, zinc plated, Cavity wall plug fixings providing you a wall plug fixing with permanent anchor fixing with cavity walls. You can install the cavity wall plug fixing using the AT Fixing stool which is suitable for all Interset wall plug fixings (stock number 0528362) or use pliers. The Wall plug fixings are supplied with a combination head screw and they can be removed from the plasterboard wall and re-fitted as required and are suitable for all board building material with a thickness of 2 mm to 38 mm allowing the SM Interset wall fixings to be used for various applications. You are provided with a wall fixing -that is secure due to the hinged legs giving maximum load bearing plus the integral thread and flange adding extra assurance complete with the anti-rotation lugs. Features and Benefits. SM Interset™ Cavity Wall Plug Fixings.Meta Zinc plated.Provides permanent anchor fixing (cavity walls).Suitable for all board building material with a thickness of 2 mm to 38 mm.For fixing we recommend the RawlPlug AT Fixing Tool – stock number 0528362.One-piece stamping.Integral thread and flange (extra stability).Hinged fixing legs (maximising load bearing).Expanded arms have a large contact area (increased load bearing and security).Cavity wall fixings can be removed and re-located.A combination head screw is supplied. Suitable Fixing Tool Available? Stock number 0528362, AT Tool. Typical Cavity Wall Fixings Applications. Shelving and bathroom accessories (on standard plasterboard).Radiators and kitchen cabinets (on double thickness and tiled plasterboard).Picture hanging.Lamp mounting.Towel rails.Curtain rails.Hanging mirrors. Material the SM Interset Plasterboard Cavity Wall Plugs Fixings are Compatible with? Plasterboard.Gypsum fibreboards.Chipboard.Oriented strand board. SM Interset Plasterboard Cavity Wall Plugs Fixings Available? Stock number 530961, steel, 8 mm x 20 mm long, Pan head with Slotted Pozidriv for 10 mm thick material max.Stock number 6917973, steel, 12 mm x 52 mm long, Pan head with Slotted Pozidriv for 23 mm thick material max.Stock number 6917960, steel, 8 mm x 32 mm long, Pan head with Slotted Pozidriv for 15 mm thick material max.Stock number 520857, steel, 10 mm x 37 mm long, Pan head with Slotted Pozidriv for 17 mm thick material max.Stock number 6917976, steel, 10 mm x 52 mm long, Pan head with Slotted Pozidriv for 23 mm thick material max. Stock number 530983, steel, 10 mm x 65 mm long, Pan head with Slotted Pozidriv for 23 mm thick material max.Stock number 6917979, steel, 12 mm x 37 mm long, Pan head with Slotted Pozidrive for 18 mm thick material maxStock number 530977, steel, 8 mm x 38 mm long, Pan head with Slotted Pozidriv for 17 mm thick material max.Stock number 520863, steel, 12 mm x 65 mm long, Pan head with Slotted Pozidriv for 24 mm thick material max.Stock number 6917982, steel, 12 mm x 80 mm long, Pan head with Slotted Pozidriv for 25 mm thick material max.Stock number 6917963, steel, 8 mm x 46 mm long, Pan head with Slotted Pozidriv for 19 mm thick material max.Stock number 6917985, steel, 12 mm x 80 mm long, Pan head with Slotted Pozidriv for 35 mm thick material max.Stock number 6917967, steel, 8 mm x 66 mm long, Pan head with Slotted Pozidriv for 38 mm thick material max. How to use the SM Interset Plasterboard Cavity Wall Plugs? Drill a hole ensuring it is the correct diameter needed for the job.Insert the wall plug fixing into the drilled hole.Gently, using a hammer, tap the wall fixing into the drilled hole plus ensure the fitted anti-rotation lugs on the fixing penetrates the wall.When the fixing is inserted into the drilled hole you then use the AT Setting Tool to pull the screw head and this will expand the fixings body providing a secure installation. What types of plasterboard fixings are there? Zinc alloy - an all in one self-drilling anchor.Zinc alloy reduced depth.Nylon. Can I screw straight into plasterboard? Ordinary wall plugs are not suitable for use with plasterboard as they expand once you screw into them, which will create holes and cause the plasterboard to crumble due to its softer properties. It is essential that you use the correct fixing such as self-drill zinc alloy or nylon plasterboard fixings. What types of plasterboard fixings are there? There is a wide range of fixings and wall plugs available that are suited for use with plasterboard, depending on what it is you're fixing. Some of the most common are: Steel self-drilling wall plug.Steel hollow wall anchor.Nylon plug.Plastic cavity plug.Rawlplug fastener.

RawlPlug SM Interset™ Cavity Wall Plug Fixings. From RawlPlug this is the SM Interset, zinc plated, Cavity wall plug fixings providing you a wall plug fixing with permanent anchor fixing with cavity walls. You can install the cavity wall plug fixing using the AT Fixing stool which is suitable for all Interset wall plug fixings (stock number 0528362) or use pliers. The Wall plug fixings are supplied with a combination head screw and they can be removed from the plasterboard wall and re-fitted as required and are suitable for all board building material with a thickness of 2 mm to 38 mm allowing the SM Interset wall fixings to be used for various applications. You are provided with a wall fixing -that is secure due to the hinged legs giving maximum load bearing plus the integral thread and flange adding extra assurance complete with the anti-rotation lugs. Features and Benefits. SM Interset™ Cavity Wall Plug Fixings.Meta Zinc plated.Provides permanent anchor fixing (cavity walls).Suitable for all board building material with a thickness of 2 mm to 38 mm.For fixing we recommend the RawlPlug AT Fixing Tool – stock number 0528362.One-piece stamping.Integral thread and flange (extra stability).Hinged fixing legs (maximising load bearing).Expanded arms have a large contact area (increased load bearing and security).Cavity wall fixings can be removed and re-located.A combination head screw is supplied. Suitable Fixing Tool Available? Stock number 0528362, AT Tool. Typical Cavity Wall Fixings Applications. Shelving and bathroom accessories (on standard plasterboard).Radiators and kitchen cabinets (on double thickness and tiled plasterboard).Picture hanging.Lamp mounting.Towel rails.Curtain rails.Hanging mirrors. Material the SM Interset Plasterboard Cavity Wall Plugs Fixings are Compatible with? Plasterboard.Gypsum fibreboards.Chipboard.Oriented strand board. SM Interset Plasterboard Cavity Wall Plugs Fixings Available? Stock number 530961, steel, 8 mm x 20 mm long, Pan head with Slotted Pozidriv for 10 mm thick material max.Stock number 6917973, steel, 12 mm x 52 mm long, Pan head with Slotted Pozidriv for 23 mm thick material max.Stock number 6917960, steel, 8 mm x 32 mm long, Pan head with Slotted Pozidriv for 15 mm thick material max.Stock number 520857, steel, 10 mm x 37 mm long, Pan head with Slotted Pozidriv for 17 mm thick material max.Stock number 6917976, steel, 10 mm x 52 mm long, Pan head with Slotted Pozidriv for 23 mm thick material max. Stock number 530983, steel, 10 mm x 65 mm long, Pan head with Slotted Pozidriv for 23 mm thick material max.Stock number 6917979, steel, 12 mm x 37 mm long, Pan head with Slotted Pozidrive for 18 mm thick material maxStock number 530977, steel, 8 mm x 38 mm long, Pan head with Slotted Pozidriv for 17 mm thick material max.Stock number 520863, steel, 12 mm x 65 mm long, Pan head with Slotted Pozidriv for 24 mm thick material max.Stock number 6917982, steel, 12 mm x 80 mm long, Pan head with Slotted Pozidriv for 25 mm thick material max.Stock number 6917963, steel, 8 mm x 46 mm long, Pan head with Slotted Pozidriv for 19 mm thick material max.Stock number 6917985, steel, 12 mm x 80 mm long, Pan head with Slotted Pozidriv for 35 mm thick material max.Stock number 6917967, steel, 8 mm x 66 mm long, Pan head with Slotted Pozidriv for 38 mm thick material max. How to use the SM Interset Plasterboard Cavity Wall Plugs? Drill a hole ensuring it is the correct diameter needed for the job.Insert the wall plug fixing into the drilled hole.Gently, using a hammer, tap the wall fixing into the drilled hole plus ensure the fitted anti-rotation lugs on the fixing penetrates the wall.When the fixing is inserted into the drilled hole you then use the AT Setting Tool to pull the screw head and this will expand the fixings body providing a secure installation. What types of plasterboard fixings are there? Zinc alloy - an all in one self-drilling anchor.Zinc alloy reduced depth.Nylon. Can I screw straight into plasterboard? Ordinary wall plugs are not suitable for use with plasterboard as they expand once you screw into them, which will create holes and cause the plasterboard to crumble due to its softer properties. It is essential that you use the correct fixing such as self-drill zinc alloy or nylon plasterboard fixings. What types of plasterboard fixings are there? There is a wide range of fixings and wall plugs available that are suited for use with plasterboard, depending on what it is you're fixing. Some of the most common are: Steel self-drilling wall plug.Steel hollow wall anchor.Nylon plug.Plastic cavity plug.Rawlplug fastener.

RawlPlug R-RBL Rawlbolt™ Mechanical Shield Anchor Loose Bolt. From RawlPlug this is the R-RBL Rawlbolt all-purpose expanding mechanical anchor loose bolt which is for use with hollow core slab and ceramic material. The RawlPlug Rawlbolt is the original mechanical anchor with all others produced after the Rawlbolt launch. The sleeve of the rawlbolt is expanding, in 3-pieces providing you with maximum safety and optimal load and can be used in any material. Various diameter of Rawlboth are available from M6 to M20 and the R-RBL is mainly for use in cracked and con-cracked concrete (ETA option 1), hollow core slabs, flooring blocks and ceramics. This mechanical shield anchor loose bolt is truly all purpose making it one of the most popular loose bolts available. Features and Benefits. R-RBL Rawlbolt Mechanical Shield Anchor.Loose bolt.All-purpose.Expanding (3-pieces).Maximum safety and optimal load.Diameters available from M6 to M20.For use in any substrate.For use in cracked and non-cracked concrete (ETA option 1), hollow core slabs, flooring blocks and ceramics. Typical R-RBL Rawlbolt Mechanical Shield Anchor Loose Bolt Fixings Applications. Roller shutter doors.Fire doors.Structural steel work.Security grills.Heavy machinery.Pipework and ductwork supports. Material the R-RBL Rawlbolt Loose Bolt Anchors are Compatible with? Approved for use in: Solid clay brick ≥ 20MPa.Hollow Lightweight Concrete Block LAC 5 ≥ 5MPa. Hollow Sand-lime Brick ≥ 15MPa. Concrete hollow floor block (Teriva). Hollow-core Slab C20/25.Hollow-core Slab C30/37-C50/60. R-RBL Rawlbolt Loose Bolt Anchors Fixings Available? Stock number 279004, Steel, M6, 12 mm x 85 mm.Stock number 279010, Steel, M8, 14 mm x 95 mm.Stock number 279026, Steel, M10, 16 mm x 115 mm.Stock number 279032, Steel, M12, 20 mm x 120 mm.Stock number 525329, Steel, M6, 12 mm x 55 mm.Stock number 525335, Steel, M8, 14 mm x 65 mm.Stock number 525341, Steel, M10, 16 mm x 75 mm.Stock number 525420, Steel, M10, 16 mm x 90 mm.Stock number 528249, Steel, M6, 12 mm x 70 mm.Stock number 528255, Steel, M8, 14 mm x 80 mm.Stock number 528261, Steel, M12, 20 mm x 90 mm.Stock number 528277, Steel, M12, 20 mm x 105 mm.Stock number 6816713, Steel, M10, 16 mm x 140 mm.Stock number 6816722, Steel, M12, 20 mm x 140 mm.Stock number 6816725, Steel, M16, 25 mm x 135 mm.Stock number 6816729, Steel, M16, 25 mm x 150 mm. How to use the R-RBL Rawlbolt Loose Bolt Anchors? Drill a hole (have pre-drilled hole ready) ensure that it is the correct diameter and depth needed.Clean out the drilled hole removing all debris and dust (important to thoroughly remove everything, use a blowpump).Remove the pre-assembled bolt and washer.Insert the shield into the drilled hole and gently tap into the hole till it is flush with the surface.Insert the bolt with the washer through the fixture and into the shield.Tighten the fixing carefully, only to the recommended torque.

RawlPlug R-RBL-E Rawlbolt™ All Purpose Shield Anchor Plug Eye Bolt. From RawlPlug this is the R-RBL-E Rawlbolt shield anchor eye bolt plug, one of RawlPlug’s most sought after all purpose expanding shield anchors. The R-RBL-E Rawlbolt is the eye bolt version, the original single piece cold formed eye bolt closed forged hook with excellent durability and safety. The expanding sleeve is made up of 3-pieces providing excellent expansion and optimum load safety for any material. Features and Benefits. R-RBL-E Rawlbolt Expanding Eye Bolt Plug.Shield anchor.Expanding.Single piece cold formed.Excellent durability.3-Piece expanding sleeve.Optimal load and safety capacity.Used in any material.Closed forged hook (maximum safety).Suitable for permanent and temporary anchoring. Safety Note: Eye Rawlbolts and not suitable for all Arrest Systems or shock loading. Typical Shield Anchor Eye Bolt Fixings Applications. Supporting ladder restraints.Supporting Guy ropes, stays and cables. Material the R-RBL-E Rawlbolt Eye Bolts are Compatible with? Approved for use in: Cracked concrete C20/25-C50/60.Non-Cracked concrete C20/25-C50/60.Unreinforced concrete.Reinforced concrete.Solid clay brick ≥ 20MPa.Hollow lightweight concrete block LAC 5 ≥ 5MPa.Hollow sand lime brick ≥ 15MPa.Hollow core slab C20/25.Hollow core slab C30/37-C50/60. R-RBL-E Rawlbolt Expansion Eye and Hook Bolts Fixings Available? Stock number 528227, M6, Shield anchor Eye Bolt, 12 mm x 83 mm.Stock number 528205, M6, Shield anchor Hook Bolt, 12 mm x 83 mm.Stock number 528233, M8, Shield anchor Eye Bolt, 14 mm x 98 mm.Stock number 528211, M8, Shield anchor Hook Bolt, 14 mm x 98 mm.Stock number 6816738, M10, Shield anchor Eye Bolt, 16 mm x 120 mm.Stock number 6816735, M10, Shield anchor Hook Bolt, 16 mm x 120 mm.Stock number 6816731, M12, Shield anchor Eye Bolt, 20 mm x 145 mm.Stock number 6816744, M12, Shield anchor Hook Bolt, 20 mm x 145 mm. How to use the R-RBL-E Rawlbolt Expansion Eye Bolts? Drill a hole (have pre-drilled hole ready) ensure that it is the correct diameter and depth needed.Special note: If fixing into brickwork avoid all mortar joint areas.Clean out the drilled hole removing all debris and dust (important to thoroughly remove everything, use a blowpump).Insert the anchor into the pre-drilled hole till it is flush with the surface then position the eye as required.Tighten the fixing carefully, only to the recommended torque using the Hex but and not the eye.

RawlPlug SPO Metal Spring Toggle Anchor Plasterboard Wall Plug. From RawlPlug this is the SPO Spring Toggle self-acting anchor wall plug which is designed mainly for use with plasterboard and is easily installed. The SPO spring toggle wall plug is excellent for any overhead installation applications plus provides quick and easy installation for fastenings placed behind thick panels in flat cavities. The spring toggle anchor fixing has a long screw which is excellent when using with different board thicknesses so provides you with greater flexibility. The wide transition beams of the toggle anchor fixing provide excellent load bearing and load distribution. Features and Benefits. SPO Spring Toggle Anchor Wall and Overhead Plug.Self-acting anchor.Mainly for use in plasterboard.Long screw toggle (for thick boards, various thickness).Maximum flexibility.Wide transition beams (good load distribution and load capacity).Easy installation (fastenings behind thick panels in flat cavities).Suitable for overhead applications.Made from steel.Easy and safe installation. Typical Cavity Wall Fixings Applications. Lightweight shelving.Brackets, grips and hooks.Hanging paintings.Mounting lamps.Lighting.Hanging mirrors.Shelves.Also - for any decorative applications. Material the SPO Spring Toggle Anchor is Compatible with? Plasterboard.Chipboard.Oriented strand board.PVC Profile. SPO Spring Toggle Anchor Plasterboard Wall Plugs Available? Stock number 520425, steel, 11 mm x 50 mm, Pan head, Slotted Posidriv,10 mm max material thickness.Stock number 520431, steel, 14 mm x 50 mm, Pan head, Slotted Posidriv,15 mm max material thickness.Stock number 520447, steel, 14 mm x 80 mm, Pan head, Slotted Posidriv, 20 mm max material thickness.Stock number 6816741, steel, 18 mm x 80 mm, Pan head, Slotted Posidriv, 36 mm max material thickness.Stock number 6816747, steel, 18 mm x 60 mm, Pan head, Slotted Posidriv, 24 mm max material thickness. How to use the SPO Spring Toggle Anchor Plasterboard Wall Plug Fixings? Drill a hole ensuring it is the correct diameter.Compress the wings of the spring toggle anchor and push into the pre-drilled hole.Tighten the screw ensuring you pull the fixing out from the wall or ceiling, this prevents the wings of the anchor from spinning. What types of plasterboard fixings are there? Zinc alloy - an all in one self-drilling anchor.Zinc alloy reduced depth.Nylon. Can I screw straight into plasterboard? Ordinary wall plugs are not suitable for use with plasterboard as they expand once you screw into them, which will create holes and cause the plasterboard to crumble due to its softer properties. It is essential that you use the correct fixing such as self-drill zinc alloy or nylon plasterboard fixings. What types of plasterboard fixings are there? There is a wide range of fixings and wall plugs available that are suited for use with plasterboard, depending on what it is you're fixing. Some of the most common are: Steel self-drilling wall plug.Steel hollow wall anchor.Nylon plug.Plastic cavity plug.Rawlplug fastener.

RawlPlug Uno™ Universal Plug From RawlPlug this is the UNO Universal Plug part of the UNO range of lightweight fittings allowing you to work and fix into any solid or hollow base material. The design of the wall plug provides excellent expansion and maximum grip ensuring good anchoring plus the design includes anti-rotation so no turning within the drilled hole. The lip fitted onto the plug is a safety design that will stop the wall plug from further slipping if fitted into a drill hole that is bigger than needed. Features and Benefits. UNO Universal fixing plug.Lightweight to medium weight fixing.Use on any solid and hollow cavity base material.Excellent for use with unknown substrates and holes.Short length is an added benefit on thin walls.Maximum expansion and grip.100% anchoring due to split design.Anti-rotation fins prevent spinning in the drilled hole.Fitted lip prevents slipping inside over-sizes holes.Made from Plastic.Various colours available. Typical Fixings Applications. Shelving.Suspended ceilings.Electrical fitting.Cable trays.Boilers.Radiators.Lighting.Bathroom fittings.Truly universal uses. Material the UNO Universal Masonry Plug is Compatible with? Concrete.Solid brick.Solid sand-lime brick.Vertically perforated clay block.Hollow sand-lime brick.Aerated concrete block.Plasterboard. UNO Universal Plugs Available? Stock number 5213403, 6 mm x 28mm, Red, quantity 288.Stock number 5213100, 6 mm x 28mm, Red, quantity 1000.Stock number 5213065, 7 mm x 30 mm, Brown, quantity 288.Stock number 5213122, 7 mm x 30 mm, Brown, quantity 1000.Stock number 5213043, 5 mm x 24 mm, Yellow, quantity 288.Stock number 5213093, 5 mm x 24 mm, Yellow, quantity 1000. Stock number 1542487, 6 mm x 28 mm, fixing thickness 55 mm, Red, quantity 300.Stock Number 1542486, 7 mm x 30 mm, fixing thickness 60 mm, Brown, quantity 300.Stock number 1542484, with screw, 6 mm x 28 mm, Red, quantity 500.Stock number 1542485, with screw, 7 mm x 30 mm, Brown, quantity 350. How to use the UNO Universal Plug? Drill a hole ensuring it is the correct diameter required.Insert the UNO universal plug and using a hammer gently tap the plug into the drilled hole.Insert a screw of the correct diameter and length into the universal plug, tighten as required.

RawlPlug R-XPT Masonry Mechanical Anchor Throughbolt Fixing. From RawlPlug this is the R-XPT Throughbolt mechanical anchor fixing a high performance and high-quality fixing for use in non-cracked concrete approved to ETA Option 7. The throughbolt fixing has a 6-grip feature design giving you high load-bearing capacity plus the cold-formed body ensures dimensional accuracy. It is easy to install allowing you to drill and install directly through the fixture plus it has depth markings ensuring precise installation and suitable for reduced embedment. Features and Benefits. R-XPT Mechanical Anchor Throughbolt Plug Fixing.For non-cracked concrete.Approval ETA Option 7.Suitable for reduced embedment (avoiding contact with the reinforcement).Embedded depth marking (assisting precise anchor installation).Drill and install directly through the fixing.Cold formed body (dimensional accuracy).Easy through installation (drill installation through fixed material).6-Grip feature expander design (high-load bearing capacity).High Quality and performance.Cost effective.Simple and easy to use. Typical R-XPT Throughbolt Plug Anchor Fixings Applications. Cladding restraint.Curtail wall.Balustrading.Barriers.Handrails.Racking.Structural Steel.Bollards. Material the R-XPT Throughbolt Screw Thread Anchors Fixings are Compatible with? Approved for use in: Non-Cracked concrete C20/25-C50/60.Unreinforced concrete.Reinforced concrete.Natural stone (must first be site tested).Not suitable for Cavity wall or plasterboard wall fixing. R-XPT Throughbolt Screw Bolt Anchor Fixings Available? Stock number 530539, Threaded 8 mm, 8 mm x 50 mm.Stock number 6816750, Threaded 8 mm, 8 mm x 65 mm.Stock number 530545, Threaded 8 mm, 8 mm x 85 mm.Stock number 4833668, Threaded 8 mm, 8 mm x 115 mm.Stock number 7362579. Threaded 10 mm, 10 mm x 80 mm.Stock number 7362572, Threaded 10 mm, 10 mm x 95 mm.Stock number 7362576, Threaded 10 mm, 10 mm x 115 mm.Stock number 7362585, Threaded 10 mm, 10 mm x 130 mm.Stock number 530595, Threaded 12 mm, 12 mm x 80 mm.Stock number 530602, Threaded 12 mm, 12 mm x 100 mm.Stock number 6816757, Threaded 12 mm, 12 mm x 120 mm.Stock number 7362588, Threaded 12 mm, 12 mm x 135 mm.Stock number 7362582, Threaded 12 mm, 12 mm x 140 mm.Stock number 7362591, Threaded 12 mm, 12 mm x 150 mm.Stock number 530539, Threaded 8 mm, 8 mm x 50 mm.Stock number 530630, Threaded 16 mm, 16 mm x 180 mm.Stock number 530646, Threaded 16 mm, 16 mm x 220 mm. Stock number 1542488, Threaded 10 mm, 10 mm x 80 mm.Stock number 1542489, Threaded 10 mm, 10 mm x 140 mm.Stock number 1542490, Threaded 12 mm, 12 mm x 100 mm.Stock number 1542491, Threaded 12 mm, 12 mm x 125 mm.Stock number 1542492, Threaded 12 mm, 12 mm x 140 mm.Stock number 1542493, Threaded 12 mm, 12 mm x 180 mm.Stock number 1542494, Threaded 16 mm, 16 mm x 105 mm.Stock number 1542495, Threaded 16 mm, 16 mm x 140 mm. How to use the R-XPT Throughbolt Fixing Anchors? Drill a hole (have pre-drilled hole ready) ensure that it is the correct diameter and depth needed.Clean out the drilled hole removing all debris and dust (important to thoroughly remove everything, use a blow-pump).Gently tap the thoughbolt into the fixture until the correct fixing depth is reached.Tighten the fixing carefully, only to the recommended torque.

RawlPlug R-RLK-L Rawlok™ All Purpose Loose Bolt Expansion Anchor Plug. From RawlPlug this is the R-RLK-L Rawlok loose bolt all-purpose expansion anchor plug designed to provide you with maximum performance. The Rawlock all-purpose expansion anchor plug is best for use with medium weight applications and the design ensures quality performance in various materials. To ensure you are using the correct expansion anchor plug each plug has the bolt and drill size marked into the sleeve of the anchor plus it includes an integral collapse feature providing maximum clamping force to the anchor plug. Features and Benefits. R-RLK-L Rawlok Expansion Anchor Plug.Loose Bolt.All purpose.Medium weight anchor applications.Maximum performance in most base material.Integral collapse feature (ensures maximum clamping force).Bolt and drill size marked on the Expansion anchor bolt sleeve. Typical Anchor Plug Masonry Fixings Applications. Radiators.Signs.Stadium seating.Satellite dishes.Wall plates.Shutters.Garage doors. Material the R-RLK-L Rawlok Expansion Anchor Plug is Compatible with? Non-cracked concrete (C20/25-C50/60 Approval).Solid brick.Reinforced concrete. R-RLK-L Rawlok Expansion Anchor Plug Fixings Available? Stock number 8192706, M8, steel, Shield Anchor loose bolt, 10 mm x 60 mm.Stock number 3785524, M10, steel, Shield Anchor loose bolt, 10 mm x 70 mm.Stock number 3785518, M10, steel, Shield Anchor loose bolt, 10 mm x 60 mm.Stock number 3785502, M8, steel, Shield Anchor loose bolt, 10 mm x 80 mm. How to use the R-RLK-L Rawlok Expansion Anchor Plug? Drill a hole (have pre-drilled hole ready) ensure that it is the correct diameter and depth needed.Special note: If fixing into brickwork avoid all mortar joint areas.Clean out the drilled hole removing all debris and dust (important to thoroughly remove everything).Insert the Rawlok through the fixture into the pre-drilled hole.Tighten the fixing (screw) carefully, only to the recommended torque. What is an Expansion Anchor? An expansion anchor is a fixing which is mainly used in a solid base material that when fixed in place gives you the fixing required through the expansion of the anchor. A pre-expanded anchor is simply inserted into a drilled hole and when tightened exerts pressure (expansion within the hole to provide a solid fixing). An un-expanded anchor requires the anchor to be set once installed into the drilled hole.